Abstract:As an important component of organic solid wastes, disposal of plastic wastes (PWs) has always been a thorny issue. Thermochemical conversion is an efficient method. In-depth research on the influence of structural differences on their pyrolysis behavior is beneficial to promote the development of thermal treatment and conversion technology of PWs. The differences in the chemical structure of different polyolefin plastics at the molecule level are mainly reflected in their side chains. Herein, a series of typical polyolefin plastics with similar backbone structure and different side chain structures, including high-density polyethylene (HDPE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), polyvinyl alcohol (PVA) and ethylene-vinyl acetate copolymer (EVA), were selected for comprehensive pyrolysis characterization in this work. Advanced experimental analysis methods such as in-situ DRIFT and 2D-PCIS were adopted to investigate the evolution of two weak oxygen-containing side chains during pyrolysis of PVA and EVA, respectively. Besides, typical product distribution of six samples were systematically studied by combining SVUV-PIMS and GC/MS. Spectral analysis showed that OH side chain in macromolecular structure of PVA had the weakest thermal stability, and its oxidation reaction occurred earlier than dissociation and dehydration, while the acetoxy side chain in EVA polymers could not only be directly dissociated via deacetoxylation, but also be transformed into OH side chain via deacetylation that occurred simultaneously with deacetoxylation. Further combined with SVUV-PIMS and GC/MS, the distribution characteristics of pyrolysis products of polyolefin plastics and the rules of generation and release of typical products with temperature were obtained in detail. It was found that the release of typical oxygen-containing products was earlier or slightly earlier than the release of hydrocarbons in pyrolysis of PVA or EVA. However, the release of all hydrocarbons was almost simultaneous during the respective pyrolysis process of HDPE, PP and PS, suggesting that the evolution of oxygen-containing side chains with weak thermal stability occurred earlier under the drive of temperature. Based on the characterization results, the main evolution pathways of different side chains were proposed to explain the influence mechanism of different side chain structures on the pyrolysis behavior of polyolefin plastics. The cleavage of CC bonds mainly occurred in HDPE, PP and PS, while the evolution of side chains occurred first in PVC, PVA and EVA, and exerted different influence on the degradation of carbon skeleton.

Studies on co-processing vacuum residue with waste plastics using thermogravimetric analysis

Co-Processing Vacuum Residue with Waste Plastics in A Delayed Coking Process: Kinetics and Modeling

Synergistic effects and kinetics analysis for co-pyrolysis of vacuum residue and plastics

Study on the pyrolysis behaviors of mixed waste plastics

Study on the co-processing of vacuum residue and coal tar in delayed coking

Comparative Study on the Synergistic Co-Pyrolysis of Plastics and Rubber Waste: Thermal Behavior and Product Distributions

Enhancement of liquid/gas production during co-pyrolysis of vacuum residue and plastics due to synergistic interactions

Thermal Behavior and Pyrolysis Kinetics of Mushroom Residue with the Introduction of Waste Plastics

Thermal behavior, synergistic effect and thermodynamic parameter evaluations of biomass/plastics co–pyrolysis in a concentrating photothermal TGA

Upgrading Vacuum Residue in a Supercritical CO 2 Environment with Polypropylene and Steam: Insights into Products Distribution and Characterization of Liquid Products

Co-pyrolysis Behaviors and Kinetics of Plastics–biomass Blends Through Thermogravimetric Analysis

Co-pyrolysis of Lignite and Vacuum Residue: Product Distribution and Hydrogen Transfer

Co-pyrolysis characteristics and kinetic analysis of organic food waste and plastic.

TG/FTIR Analysis on Co-Pyrolysis Behavior of PE, PVC and PS.

Synergistic Effect and Chlorine-Release Behaviors During Co-pyrolysis of LLDPE, PP, and PVC

Study on the co-pyrolysis of waste tires and plastics

Study on the influence of different side chain structures on the pyrolysis behavior of polyolefin plastic wastes

Thermal behaviour and kinetic study of co-pyrolysis of microalgae with different plastics

Research on Pyrolysis Characteristics of Typical Plastics

Kinetic studies on the pyrolysis of plastic waste using a combination of model-fitting and model-free methods

Pyrolysis Characterization and Mechanism Studies of Different Structural Plastics: A Comparative Study at Optimal Temperatures