Abstract:The circulating current within modular multilevel converters increases the peak/RMS value of the arm currents and the magnitude of the sub-module voltage fluctuation,and thus affects the safe operation of power electronic devices.Therefore,it is necessary to eliminate the circulating current.It is pointed that,under the unbalanced grid voltage,the second three-phase harmonic circulating current can be decomposed into positive,negative and,zero sequence components and the dc component of the three-phase circulating current is not necessary equal to each other by deriving and analyzing the phase unit instantaneous energy.The formulas of the dc component of the circulating current,i.e.the circulating current reference,are derived and a novel circulating current suppressing method,which is based on proportional-integral (PI) regulator and vector proportional-integral (VPI) regulator in parallel,is proposed.The tuning principle of the related control parameters is given.The novel circulating current suppressing method can be executed in the abc stationary reference frame so that coordinate transformation is not needed and thus it has a simple control structure.Besides that,the positive,negative,and zero sequence components of the second harmonic circulating current can be eliminated simultaneously and the method can achieve good control performance under balanced and unbalanced grid voltages.A 21-level MMC simulation model is set up in the PSCAD/EMTDC in order to validate the correctness and effectiveness of the proposed method.

Mechanism Analysis on the Circulating Current in Modular Multilevel Converter Based HVDC

The Unified Model and Optimal Operation Analysis for A Modular Multilevel Converter

Analysis of Sub-module Capacitor Voltage Ripples and Circulating Currents in Modular Multilevel Converters

Introduction, Modeling and Simulation of Modular Multilevel Converter

Analysis and Injection Control of Circulating Current for Modular Multilevel Converters

Study of Unbalanced Circular Current Suppressing for Modular Multilevel Converter

Analysis and Control of Modular Multilevel Converters Under Unbalanced Conditions

A Steady-State Analysis Method for a Modular Multilevel Converter

Circulating Current Suppression for MMC-HVDC Systems with Asymmetric Arm Impedance

The Evolution and Variation of Sub-Module Topologies with DC-fault Current Clearing Capability in MMC-HVDC

Modeling and Control of Modular Multilevel Converter in HVDC Transmission

Performance Analysis and Optimization of Circulating Current Control for Modular Multilevel Converter

Characteristic Analysis and a Circulating Current Control Method in Modular Multilevel Converters under Unbalanced Grid Conditions

A Circulating Current Suppression Method Based on Double Coordinate Compound Control for Modular Multilevel Converters

Analysis and Suppression of Circulating Harmonic Currents in a Modular Multilevel Converter Considering the Impact of Dead Time

A Novel CCSC for Circulating Current Suppression in Modular Multilevel Converters

A Circulating Current Suppressing Method for Modular Multilevel Converter Under Unbalanced Grid Voltage

Low-frequency Harmonic Resonance Analysis and Suppression Method of Modular Multilevel Converter

Research about the Model and Steady-state Performance for Modular Multilevel Converter

Hierarchical Circulating Current Control Method for Modular Multilevel Converter

Three-Phase Series-Connected Modular Multilevel Converter for HVDC Application