Abstract:<p>The immersed boundary method (IBM) with direct forcing is very popular in the simulation of rigid particulate flows. In the IBM, an interaction force is introduced at the interface between fluid and particle in order to approximate the no-slip boundary condition. The interaction force is calculated through dividing the velocity difference (or error) between fluid and particle at the interface by the time step. Here, a dynamic equation for the velocity difference is derived. Analyses on the dynamic equation provide a few new findings: (i) The interaction force is the solution of a least-squares error problem, with the direct implication that the Lagrangian marker distribution has no effect on the large scale flow structure once the distribution of Lagrangian markers become saturated along the interface (i.e., each marker remains properly correlated with all its neighbors); (ii) The Lagrangian volume-weight is a relaxation factor to control how fast the velocity error decays to the ideal value of zero; (iii) The optimal choice of the Lagrangian volume-weight is the largest value permissible by a stability condition. A comprehensive convergence analysis with regard to the spatial and temporal resolution is presented for the velocity error and also for the shear-stress and surface pressure. In three simple canonical problems, it is analytically and numerically shown that the IBM results converge to the theoretical solutions obtained with precise imposition of no-slip and no-penetration boundary conditions. It is observed that it is not necessary to match the Lagrangian marker volume-weight to that of the local Eulerian cell volume and in fact this matching leads to lower than optimal computational efficiency. However, it is found that extremely high Eulerian grid resolution and small time step have to be used to obtain high precision simulation results. Especially, the time step should be inversely proportional to the particle Reynolds number for low Reynolds number flows. For high frequency oscillation problems, the grid size needs to be reduced by a factor of the square root of the frequency, and the time step to be reduced by a factor of the frequency. The theoretical findings here can be used to alleviate the technical difficulties in simulating non-spherical particles by not requiring the Lagrangian marker distribution to match the Eulerian grids and also in the implementation of IBM on non-uniform Eulerian grids. The present work also provides simple practical guidance on the choice of temporal and spatial resolution so as to control the simulation error a priori.</p>

Direct Numerical Simulation of Flow Past a Sphere in a Plane Turbulent Boundary Layer with Immersed Boundary Method.

Direct Numerical Simulation of Channel Flow with Real Surface Roughness Using a Ghost Cell Immersed Boundary Method

A Fast, Efficient Multi-Direct Forcing of Immersed Boundary Method for Flow in Complex Geometry.

Direct numerical simulation of the flow around a sphere immersed in a flat-plate turbulent boundary layer

Numerical study of uniform flow over sphere at intermediate Reynolds numbers

Study on Flow Past Two Spheres in Tandem Arrangement Using a Local Mesh Refinement Virtual Boundary Method

Numerical investigations of wake and force for flow past a sphere

Dynamic Simulation of Sphere Motion in a Vertical Tube

Direct Numerical Simulation of the Transitional Boundary-Layer Flow Induced by an Isolated Hemispherical Roughness Element

Numerical investigation of cavitation-vortex structures around a sphere with boundary data immersion method

Numerical Simulation of Hydrodynamic Focusing of Particles in Straight Channel Flows with the Immersed Boundary-Lattice Boltzmann Method

An immersed boundary method coupled non-hydrostatic model for free surface flow

Numerical Simulation of Two-Dimensional Viscous Flows Using Combined Finite Element-Immersed Boundary Method

Direct Numerical Simulations of the Swirling von Karman Flow Using a Semi-implicit Moving Immersed Boundary Method

IBM/ICM Method for Interactions Between Moving Bodies and Free Surfaces

Immersed Boundary Method for the Simulation of Flows with Heat Transfer

Application of Immersed Boundary Method in Turbomachines

An Efficient Immersed Boundary-Lattice Boltzmann Method for the Simulation of Thermal Flow Problems

Simulation Of Three-Dimensional Flows Over Moving Objects By An Improved Immersed Boundary-Lattice Boltzmann Method

An analysis of the spatio-temporal resolution of the immersed boundary method with direct forcing

A boundary thickening-based direct forcing immersed boundary method for fully resolved simulation of particle-laden flows