Abstract:Deep high static loading roadway is extremely prone to rock burst under dynamic load disturbance. The “force-energy criterion” for the failure of surrounding rock in such deep roadways and the “energy criterion” for the rock burst was established by considering the stress and energy evolution characteristics of rock burst under this circumstance. Under the engineering background of the main roadway in No.1 mining area of Gaojiapu Coal Mine in Binchang Mining Area, Shaanxi Province, China, the partial stress field and distortion energy field of surrounding rock in the main roadway and the spatial-temporal evolution laws under dynamic load disturbance were simulated and analyzed by using a built-in dynamic module of FLAC3D. Results show that after the dynamic load disturbance, the partial stress and distortion energy are concentrated in the shallow part at two walls of the roadway in the early phase. With the continuous propagation of dynamic load stress wave, the partial stress and distortion energy are transferred to the deep part. The sudden high-energy release occurred in the peak zone of partial stress, leading to the plastic failure of coal and rock mass. Subsequently, the distortion energy was fully accumulated in the original plastic zone and transferred from shallow surrounding rocks to the deep surrounding rocks in the roadway, where the partial stress and distortion energy of coal and rock mass reached the yield conditions. Thus, the original plastic zone was sharply expanded, thereby forming a new plastic zone. The coal and rock mass experienced an approximately static failure when no residual energy (ΔU) was found in it. When ΔU > 0, the rock mass experienced dynamic failure, and ΔU was mainly the volume transformation energy, which is approximately one-half of the total elastic strain energy. ΔU was transformed into the initial kinetic energy of broken coal and rock mass. Thus, the coal and rock mass are burst out. In severe cases, this condition was manifested by the rock burst in the main roadway. An optimization scheme of prevention and control measures for rock burst was proposed on the basis of the above conclusions. The microseismic activity laws before and after the unloading were compared, and a good effect was achieved. The research results can lay a theoretical foundation for predicting and preventing rock bursts in coal mines by actively regulating the disaster-pregnant environment and mitigating the disaster-inducing conditions.

Numerical simulation and stress analysis of rock burst in mine

Mechanism of Rock Burst Revealed by Numerical Simulation and Energy Calculation

Study on Complex Theory Solution and Numerical Simulation of Fracture Mechanics of Surrounding Rock Stress and Energy Field in Fault Type Rock Burst Stope

Numerical Simulation Research on Rockburst Prediction of Gaoloushan Deep Tunnel Based on Strength-stress Ratio Method

Numerical simulation method for the process of rockburst

Numerical Simulation on Energy Concentration and Release Process of Strain Rockburst

Distribution Law of In Situ Stress and Its Engineering Application in Rock Burst Control in Juye Mining Area

Prevention logic of rock burst for brittle rock under high geo-stress

Numerical and Field Investigations of Rockburst Mechanisms Triggered by Thick-Hard Roof Fracturing

Experimental and Numerical Analysis of Rock Burst Tendency and Crack Development Characteristics of Tianhu Granite

Numerical study on the characteristics of roadway failure and instability in coal seam with rock parting

Numerical simulation of blasting behavior of rock mass with cavity under high in-situ stress

COMPREHENSIVE STUDY ON PREDICTION OF ROCKBURST IN DEEP AND OVER-LENGTH HIGHWAY TUNNEL

Numerical Simulation of Mechanical Characteristics of Roadway Surrounding Rock under Dynamic and Static Loading

Experimental investigation on rockburst behavior of the rock-coal-bolt specimen under different stress conditions

Dynamic Response Mechanism of Impact Instability Induced by Dynamic Load Disturbance to Surrounding Rock in High Static Loading Roadway

Mechanism and Control of Roadway Floor Rock Burst Induced by High Horizontal Stress

Study on the spectrum characteristics of rock burst and the stability of the surrounding rock of a roadway in mines under dynamic load

Inverse analysis of dynamic failure characteristics of roadway surrounding rock under rock burst

Numerical study on the dynamic fragmentation of rock under cyclic blasting and different in-situ stresses

A new rockburst criterion of stress–strength ratio considering stress distribution of surrounding rock