Abstract:Abstract The unsupported catalysts were obtained during hydrogenation by in situ high-temperature decomposition (above 300 °C) of water-soluble metal precursors (ammonium molybdate and nickel nitrate) in water-in-oil (W/O) emulsions stabilized by surfactant (SPAN-80) using elemental sulfur as sulfiding agent. These self-assembly Ni–Mo sulfide nanosized catalysts were tested in hydrogenation of aromatics under CO pressure in water-containing media for hydrogen generation through a water gas shift reaction (WGSR). The composition of the catalysts was determined by XRF and active sulfide phase was revealed by XRD, TEM and XPS techniques. The calculations based on TEM and XPS data showed that the catalysts are highly dispersed. The surfactant was found to affect both dispersion and metal distribution for Ni and Mo species, providing shorter slab length in terms of sulfide particle formation and stacking within high content of NiMoS phase. Catalytic evaluation in hydrogenation of aromatics was performed in a high-pressure batch reactor at T = 380–420 °С, p(CO) = 5 MPa with water content of 20 wt.% and CO/H 2 O molar ratio of 1.8 for 4–8 h. As shown experimentally with unsupported Ni–Mo sulfide catalysts, the activity of aromatic rings depends on the substituent therein and decreases as follows: anthracene>>1-methylnaphthalene≈2-methylnaphthalene>1,8-dimethylnaphthale-ne>>1,3-di-methylnaphthalene>2,6-dimethylnaphthalene≈2,3-dimethylnaphthalene>2-ethyl-naphthalene. The anthracene conversion reaches up to 97–100% for 4 h over the whole temperature range, while for 1MN and 2MN it doesn’t exceed 92 and 86% respectively even at 420 °С for 8 h. Among dimethyl-substituted aromatics the higher conversion of 45% was achieved for 1,8-dimethylnaphthalene with 100% selectivity to tetralines at 400 °С for 6 h. Similar to 1- and 2-methylnaphtalenes, the hydrogenation of asymmetric dimethyl-substituted substrate carries out through the unsubstituted aromatic ring indicating that steric factors influence on the sorption mechanism over active metal sites. The catalysts were found to be reused for at least six cycles when the hydrogenation is sulfur-assisted preventing metal oxide formation. It was established, that at the first 2–3 h known as the induction period, the oxide catalyst precursors formed slowly by metal salt decomposition, which reveals that it is the rate-determining step. The sulfidation is rather fast based on high catalytic activity data on 2MN conversion retaining at 93–95% upon recycling.

Oil-soluble Ni-Mo Sulfide Nanoparticles and Their Hydrogenation Catalytic Properties

Monolayer-precision Synthesis of Molybdenum Sulfide Nanoparticles and Their Nanoscale Size Effects in the Hydrogen Evolution Reaction.

Synthesis of Novel NiMo Catalysts Supported on Highly Ordered TiO2-Al2O3 Composites and Their Superior Catalytic Performance for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Synthesis of Mesoporous Silica-Supported NiCo Bimetallic Nanocatalysts and Their Enhanced Catalytic Hydrogenation Performance

Influence of Ni on the active phase and hydrodenitrogenation and hydrodesulfurization activities of MoS2 catalysts

Electronic Tuning of Ni by Mo Species for Highly Efficient Hydroisomerization of N-Alkanes Comparable to Pt-Based Catalysts

A Study on the Role of Ni Atoms in the HDN Activity of NiMoS2/Al2O3 Catalyst

Effect of Ni/Mo on the preparation of non-loaded NiMoSx catalysts and the hydrogenation performance of coal tar

On the multifaceted roles of NiSx in hydrodearomatization reactions catalyzed by unsupported Ni-promoted MoS2

Synthesis of Ni/Mo/N Catalyst and Its Application in Benzene Hydrogenation in the Presence of Thiophene

Nanostructured Ni-MoCx: An efficient non-noble metal catalyst for the chemoselective hydrogenation of nitroaromatics

One-step Synthesis of Ultrafine MoNiS and MoCoS Monolayers As High-Performance Catalysts for Hydrodesulfurization and Hydrodenitrogenation

Sulfured NiMo catalysts on TiO2-Nb2O5 nanocomposites for efficient hydrodesulfurization performance

Molybdenum Anchored On Nh2-Modified Spherical Sio2: A Highly Efficient And Stable Catalyst For Oxidative Desulfurization Of Fuel Oil

Ni–Mo sulfide nanosized catalysts from water-soluble precursors for hydrogenation of aromatics under water gas shift conditions

Fabrication of Well-Structured NiMo Hydrodesulfurization Catalysts Using Electropositive Mo-based Nanoparticles

A novel and facile strategy for the preparation of highly reactive NiMo/γ-Al 2 O 3 hydrodesulfurization catalyst

Preparation of Hydrodesulfurization Catalysts Using MoS3 Nanoparticles As a Precursor

The Promoted Catalytic Hydrogenation Performance of Bimetallic Ni-Co-B Noncrystalline Alloy Nanotubes

Mechanistic insights into interfacial nano-synergistic effects in trimetallic Rh-on-NiCo on-CNTs for room temperature solvent-free hydrogenations

Ionic Liquid Immobilized Nickel(0) Nanoparticles As Stable and Highly Efficient Catalysts for Selective Hydrogenation in the Aqueous Phase