Adsorption of bisphenol A (BPA) from aqueous solutions onto mesoporous carbon and Fe-modified mesoporous carbon
Yuwei Li,Qingwen Chai,Jiaman Li,Fang Liu,Yongqiang Wang,Chaocheng Zhao
DOI: https://doi.org/10.5004/dwt.2019.23685
IF: 1.1
2019-01-01
Desalination and Water Treatment
Abstract:Bisphenol A (BPA), as a typical representative of endocrine disrupting compounds, is extensively detected in aqueous solutions and poses a serious threat to human health. Adsorption is one of the most effective and simple way to remove bisphenol A in aqueous solutions. In this study, the mesoporous carbon (MC) material and the iron-modified mesoporous carbon material (Fe/MC-x (x: 0.5, 1, 1.5)) were prepared via one-step hydrothermal synthesis method. The textural properties of MC and Fe/MC-x were characterized using transmission electron microscopy, X-ray diffractometer, Fourier transform infrared spectrometer and N-2 adsorption-desorption. Several influencing factors were conducted to investigate the adsorption performance. In addition, the mechanism for the adsorption was explained via investigating the characterization part, adsorption isotherms, thermodynamics and kinetics, thoroughly. When the optimal parameters of temperature, BPA initial concentration, adsorbent dose and contact time were 25 degrees C, 100 mg/L, 10 mg and 3 h, respectively, the maximum adsorption capacity of Fe/MC-0.5 could reach 451.6 mg/g. The adsorption equilibrium of MC and Fe/MC-x could be reached in 15-20 min. Compared with MC, the adsorption capability of Fe/MC increased by 178.5%, and the saturation time shorter up to 25%. Furthermore, the BPA adsorption on MC and Fe/MC were well in accordance with the Freundlich isotherm model (R-2 > 0.99) while the kinetic data were best described by the pseudo-second-order kinetic model (R-2 > 0.99). The adsorption process was a spontaneous exothermic reaction. The adsorption mechanism is mainly chemisorption of hydrogen bonding or pi-pi stacking interactions.