Abstract:Americium and curium, present in spent nuclear fuel, are carried forward to the high-level wastes (HLW) upon its reprocessing within the closed nuclear fuel cycle strategy. These minor actinides are required to be extracted efficiently to mitigate the long-term radiotoxicity of the HLW, which in some countries is the proposed strategy for the safe management of radioactive wastes emanating from the reprocessing of spent nuclear fuel. While both Am and Cm are co-extracted by most of extractants used for actinide partitioning and lanthanide-actinide separations, their mutual separation makes Am transmutation less complicated. In their most stable (trivalent) oxidation state, these elements are very difficult to separate. In this review, solvent extraction systems for the mutual separation of Am(III) and Cm(III) from nitric acid solutions are discussed. The extraction systems for the separation of americium directly from high-level liquid waste and from isolated mixtures of americium and curium are considered. Abbreviations: D:distribution ratio, <math> D = C o r g C a q </math>, where Corg – total concentration of a metal in the organic phase, Caq – total concentration of a metal in the aqueous phase; DF: decontamination factor, <math> D F = C x , f e e d ⋅ Q f e e d C x , p r o d u c t ⋅ Q p r o d u c t </math>, where Cx,feed, Cx,product – concentrations of an impurity in the initial feed solution and the product solution (raffinate or back-extract), Qfeed, Qproduct – flow rates of the initial feed solution and the product solution; GW×day/tHM: burn-up of nuclear fuel, where tHM – tons of heavy metal; HAC: high active concentrate; HLW: high level waste; HSAB: Hard and Soft Lewis Acids and Bases; Kex: constant of extraction, for the reaction M3+ (aq) + 3NO3 − (aq) +nL(org) = M(NO3)3Ln (org), Kex: [M3+][NO3 −]3[L]n/[M(NO3)3Ln]; PUREX: Plutonium Uranium Reduction EXtraction; GANEX: Grouped ActiNide EXtraction; REE: rare earth element; SF: separation factor, SF = D1/D2, D1>D2; SNF: spent nuclear fuel; TRLIFS: time-resolved laser induced fluorescence spectrometry; β: constant of complex formation; List of ligands: ADAAM(EH): tetra-(2-ethylhexyldiamide-(2-ethylhexyl)-amine; BTPhen: bis-triazinylphenanthroline; (Cl-Ph)2PS2H: bis-(chlorophenyl)-dithiophosphinic acid; CMPO: Carbamoylmethylphosphine oxide DMDOHEMA: N,N'-dimethyl-N,N'-dioctyl-2-(hexyloxy)ethylmalonamide; DOODa: N,N,N',N'-tetraalkyl-3,6-dioxaoctanediamide; H2BP18C6: N,N'-bis[(6-carboxy-2-pyridyl)methyl]-1,10-diaza-18-crown-6; H4TPAEN: N,N,N',N'-tetrakis-[(6-carboxypyridin-2-yl)-ethylenediamine; HDEHP: di-(2-ethylhexyl)phosphoric acid; HEDTA: hydroxyethylethylenediaminetriacetic acid; HEH[EHP]: 2-ethylhexylphosphonic acid; NTAamide: N,N,N,N',N',N'-hexaalkylnitrilotriacetamide; PhPyPO: phenyl-pyridine phosphine oxide; TBP: tri-(n-butyl)phosphate; TEDGA: tetraethyldiglycolamide; TEHP: tri-(2-ethylhexyl) phosphate; TODGA: tetraoctyldiglicolamide; TPH: hydrogenated tetrapropylene List of terms: CHON-principle: An idea that the extractant molecule should consist only of carbon, hydrogen, oxygen and nitrogen atoms, so that the spent ligand can be easily incinerated without the formation of any solid waste. Salting out-agent: An inorganic salt with the same counter-ion as an extracted complex has.Counter-current process: A process in which the solvent and the aqueous feed streams, in contact with each other, flow in opposite directions.

New conceptual process for the extraction of actinides based on oxapentane-diamides

Studies on the extraction of actinides, europium and technetium by diamide derivatives

HYDROXYLAMINE DERIVATIVE IN PUREX PROCESS. VI. STUDY ON THE PARTITION OF URANIUM/NEPTUNIUM AND URANIUM/PLUTONIUM WITH N,N-DIETHYLHYDROXYLAMINE IN THE PURIFICATION CYCLE OF URANIUM CONTACTOR

Progress of extractant studies in the partitioning of minor actinides

Organophosphorus Extractants: A Critical Choice for Actinides/Lanthanides Separation in Nuclear Fuel Cycle

Computation-Aided Development of Next-Generation Extractants for Trivalent Actinide and Lanthanide Separation

New Insight into the Partitioning of Minor Actinides I: Extraction of Palladium and Some Typical Metals with A Multidentate Soft-Ligand 2,6-Bis(5,6-dinonyl-1,2,4-triazine-3-yl)pyridine

Synthesis of Two Novel Macroporous Silica-Based Impregnated Polymeric Composites and Their Application in Highly Active Liquid Waste Partitioning by Extraction Chromatography

Association Behavior of 4-Acylpyrazolone Derivative and Tertiary Amine of High Molecular Weight in Antagonistic Synergistic Extraction of Palladium

Group Partitioning of Minor Actinides and Rare Earths from Highly Active Liquid Waste by Extraction Chromatography Utilizing Two Macroporous Silica-Based Impregnated Polymeric Composites

A Study on the Extraction of Actinides with a Novel Carboxylic Acid Extractant

Synthesis and Application of A Macroporous Silica-Based Polymeric Octyl(Phenyl)-N,N-Diisobutylcarbamoylmethylphoshine Oxide Composite for the Chromatographic Separation of High Level Liquid Waste

Extraction of metal ions from aqueous nitric acid solutions with TODGA and DHOA

Extraction of Metal Ions From Aqueous Nitric Acid Solutions With TODGA and DHOA Ⅰ.Extraction of Np(Ⅳ,Ⅴ,Ⅵ) Ions

Studies on separating trivalent actinides from lanthanides by dialkyldithiophosphinic acid extraction

Extraction of Nd(III), Eu(III), Am(III) and Cm(III) with 6-Carboxylic Di(2-Ethylhexyl) Amide Pyridine

Advanced solid-phase extraction of tetravalent actinides using a novel hierarchically porous functionalized silica monolith

Solvent extraction systems for mutual separation of Am(III) and Cm(III) from nitric acid solutions. A review of recent state-of-the-art

Extraction of Metal Ions From Aqueous Nitric Acid Solutions With TODGA and DHOA Ⅱ.Extraction of Pu(Ⅲ,Ⅳ,Ⅵ) Ions

Highly Selective Extraction of Pu (IV) and Am (III) by N,N′-diethyl-N,N′-ditolyl-2,9-diamide-1,10-phenanthroline Ligand: an Experimental and Theoretical Study

Study on Short, Straight Alkyl Chain Substituted Dithiophosphinic Acids for Actinides and Lanthanides Extraction Separation