Abstract:Direct numerical simulation (DNS) of a high Karlovitz number (Ka) CH4/air stratified premixed jet flame was performed and used to provide insights into fundamentals of turbulent stratified premixed flames and their modelling implications. The flame exhibits significant stratification where the central jet has an equivalence ratio of 0.4, which is surrounded by a pilot flame with an equivalence ratio of 0.9. A reduced chemical mechanism for CH4/air combustion based on GRI-Mech3.0 was used, including 268 elementary reactions and 28 transported species. Over five billion grid points were employed to adequately resolve the turbulence and flame scales. The maximum Ka of the flame in the domain approaches 1400, while the jet Damkohler number (Da(jet)) is as low as 0.0027. The flame shows early stages of CH4/air combustion in the near field and later stages in the far field; the separation of combustion stages can be largely attributed to the small jet flow timescale and the low Dajet. The gradient of equivalence ratio in the flame normal direction, d phi/dn, is predominantly negative, and small-scale stratification was found to play an important role in determining the local flame structure. Notably, the flame is thinner, the burning is more intense, and the levels of the radical pools, including OH, O and H, are higher in regions with stronger mixture stratification. The local flame structure is more strained and less curved in these regions. The mean flame structure is considerably influenced by the strong shear, which can be reasonably predicted by unity Lewis number stratified premixed flamelets when the thermochemical conditions of the reactant and product are taken locally from the DNS and the strain rates close to those induced by the mean flow are used in the flamelet calculation. An enhanced secondary reaction zone behind the primary reaction zone was observed in the downstream region, where the temperature is high and the fuel concentration is negligible, consistent with the observed separation of combustion stages. The main reactions involved in the secondary reaction zone, including CO + OH double left right arrow CO2 + H (R94), H + O-2 + M double left right arrow HO2 + M (R31), HO2 + OH double left right arrow H2O + O-2 (R82) and H-2 + OH double left right arrow H2O + H (R79), are related to accumulated intermediate species including CO, H-2, H, and OH. The detailed mechanism of intermediate species accumulation was explored and its effect on chemical pathways and heat release rate was highlighted. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Direct Numerical Simulation of O3/Nox Planar Reaction Jet Flow

Direct Numerical Simulation of Ozone Injection Technology for NOxControl in Flue Gas

A direct numerical simulation study of turbulence intensity effects on NOx formation in freely propagating premixed flames

A Direct Numerical Simulation Study of Flame Structure and Stabilization of an Experimental High Ka CH4/air Premixed Jet Flame

Direct Numerical Simulation of a High Ka CH4/air Stratified Premixed Jet Flame

A Comparison Between Direct Numerical Simulation and Experiment of the Turbulent Burning Velocity-Related Statistics in a Turbulent Methane-Air Premixed Jet Flame at High Karlovitz Number

Direct Numerical Simulation on Supersonic Turbulent Reacting and Non-Reacting Spray Jet in Heated Coflow

Numerical Simulation for Combustion of Droplet with Volume of Fluid Formulation

Numerical Simulation of the Formation of Pollutant Nanoparticles in the Exhaust Twin-jet Plume of A Moving Car

Direct Numerical Simulation of Hydrogen Turbulent Lifted Jet Flame in a Vitiated Coflow

Quantitative Analyses of No Formations from Different Reaction Pathways in Methane-Air Combustion at Various Pressures and Temperatures

Carrier-phase Direct Numerical Simulation and Flamelet Modeling of NOx Formation in a Pulverized Coal/ammonia Co-Firing Flame

Large eddy simulation of turbulent nonpremixed combustion based on finite chemical reaction rates

Direct numerical simulation and reaction rate modelling of premixed turbulent flames

The effect of micro-scale turbulence on the reaction rate in a chemically reactive plume

Progress in Numerical Simulation of Turbulent Reacting Rate of NO Formation in Turbulent Combustion

Numerical simulation of flow field and residence time of nanoparticles in a 1000-ton industrial multi-jet combustion reactor

Fully explicit implementation of direct numerical simulation for a transient near-field methane/air diffusion jet flame

Numerical evaluation of the effectiveness of NO2 and N2O5 generation during the NO ozonation process

Improvement of kinetic parameters and modeling of the N<sub>2</sub>O chemical reaction in combustion

Three-Dimensional Numerical Analysis of LOX/Kerosene Engine Exhaust Plume Flow Field Characteristics