Abstract:The electric fields employed for such work are generated using chips, such as planar linear interdigitated arrays or two parallel arrays. However, chip geometries usually affect the investigation of dielectrophoresis (DEP) and electrorotation (ER) significantly, and even may misdirect the theoretical prediction. In order to understand the electrodes geometries effect and provide a suitable range of parameters, three-dimensional simulations for the DEP and ER characterizations on the quadrupolar hyperbolical electrodes are carried out. Influences of the electrodes gaps, cell height, work region, energized voltage and frequencies for the DEP and ER manipulations are analyzed, and the analysis results show that the gaps of the electrodes and the cell height have enormous effects, but the work region is not so important. Moreover, depending on the theoretical analysis, ER experiments for polystyrene microspheres with the diameter of 20 μm are carried out on two kinds of chips. The experimental results show that the microspheres rotate in the counter-field direction and the maximum rotation speed appears in the megahertz range. In addition, the experimental results are compared with the simulation results, showing that the three-dimensional simulations considering the chip geometries are more accurate than the two-dimensional predictions. This paper provides a new understanding for the theoretical predictions of DEP and ER manipulations, which decreases the difference of the theoretical and experimental results significantly, and will be significant for the lab chip research.

Development of Structural Design and Simulation Analysis for Dielectrophoresis Microchips

Progress of Dielectrophoresis Microchip and its Application in Cell Analysis

Recent Advances in Dielectrophoretic Manipulation and Separation of Microparticles and Biological Cells

Development of Enrichment and Separation of Biochemical Sample by Delectrophoresis on Microchip

A Complete Design Flow of Dielectrophoretic Chip

On-chip dielectrophoretic single-cell manipulation

Numerical Study of A Dielectrophoresis Separation Device at Multiple Frequencies

Numerical simulation of dielectrophoresis induced electrothermal fluid flow

Research of cell concentration and separation on the dielectrophoretic chip with arrayed opposite electrodes

Dielectrophoretic Microfluidic Chip with 3D Vertical Side-Wall Electrodes

A Full-Scale Computational Study on the Electrodynamics of a Rigid Particle in an Optically Induced Dielectrophoresis Chip

Tutorial on Lateral Dielectrophoretic Manipulations in Microfluidic Systems

Simulation and Experimental Study of Dielectrophoresis in a Microfluidic Chip with Interdigitated Electrodes

Effects of Chip Geometries on Dielectrophoresis and Electrorotation Investigation

Fabrication of Dielectrophoretic Microfluidic Chips Using a Facile Screen-Printing Technique for Microparticle Trapping

Numerical Simulation and Optimization of Insulator-Based Dielectrophoresis Devices for Biopartical Separation

Study Of Cell Enrichment Process By Dielectrophoresis On Dielectrophoresis Microchip With Interdigitated Arrayed Electrodes

A 3-D Microelectrode System For Dielectrophoretic Manipulation Of Microparticles

Research Progress on Microfluidic Chip of Cell Separation Based on Dielectrophoresis

A stepwise multi-stage continuous dielectrophoresis separation microfluidic chip with microfilter structures

Analysis and Simulation of a Planar Microelectrode Structure for Dielectrophoretic Manipulation of a Single Cell and Cell Cluster