Abstract:The influence of different wind speeds and sealed curing time on early-age shrinkage of cement paste was investigated. The 72-h early-age total shrinkage of cement paste after sealed curing for 0 h, 3 h, 6 h, 9 h, 12 h, and 24 h starting from the initial setting time under different wind speeds was studied. Water loss, autogenous shrinkage, tensile strength, pore size distribution (PSD) and hydration degree were measured. Elastic modulus, cracking strain, and radius of the pores where the meniscus forms were calculated based on the data obtained. For mixtures that did not undergo sealed curing, the wind speed could considerably increase the drying shrinkage and total shrinkage of the cement paste. The wind speed also reduced the early tensile strength, hydration degree, and elastic modulus of the cement paste. Within 1 day, the cracking strain was reduced by wind speed. According to the experimental data, a fitting formula for the early total shrinkage of cement paste is proposed, and the wind speed influencing factor beta(w) is also proposed for the first time. Considering the PSD and water loss to study the mechanism of early drying shrinkage of cement paste, we found that there is a good correlation between r(s) and drying shrinkage. The exponential formula is given between r(s) and drying shrinkage. For mixtures with sealed curing, the total shrinkage and water loss decreased with increasing sealed curing time. However, the effects of water loss at different stages on drying shrinkage were different. Water evaporation in the early stage led to more drying shrinkage than water evaporation in the later stage. Sealed curing also weakened the increasing effect of wind speed on total shrinkage, so that at the same wind speed, the shrinkage increment was considerably reduced. After analysis and comparison, it was found that it is economical and reasonable to adopt sealed curing for 6 or 9 h, which can effectively decrease the early total shrinkage and improve the cracking strain of the cement paste in the wind environment. (C) 2020 Elsevier Ltd. All rights reserved.

Effect of the steam curing paramaters on the hydration characteristics of hardened cement paste

Effect of Forepart Strength of Cured-concrete

Effect of Steam Curing System on Pore Structure of Cement Paste

Effect of steam curing regimes on temperature and humidity gradient, permeability and microstructure of concrete

Influence of Delay Period of Steam Curing on Chloride Ions Binding Capacity of Harden Cement Paste with Subsequent Standard Curing

Effect of Different Wind Speeds and Sealed Curing Time on Early-Age Shrinkage of Cement Paste

Effect of steam curing on strength, durability and microstructure of concretes with and without mineral admixtures

The Early Age Hydration Products and Mechanical Properties of Cement Paste Containing GBFS under Steam Curing Condition

Effect of Steam Curing on Performance of Low Quality Reclaimed Fine Aggregate Concrete

Influence of pre-curing time on the hydration of binder and the properties of concrete under steam curing condition

Influence of Steam Curing Method on the Performance of Concrete Containing a Large Portion of Mineral Admixtures

Effect of Curing Conditions on Property of High Performance Concrete with Composite Mineral Admixture

Influence of High-Volume Mineral Mixtures and the Steam-Curing Temperatures on the Properties of Precast Concrete

Effect of steam curing system on compressive strength of recycled aggregate concrete

Effect of Curing Regime on the Mechanical Properties and Durability of Steam Cured-Concrete

Effect of steam curing scheme on the early-age temperature field of a prefabricated concrete T-beam

Influence of elevated curing temperature on the properties of cement paste and concrete at the same hydration degree

Low-Alite Portland Cement in Steam-Curing Condition: Long-Term Compressive Strength and Permeability

Hydration Mechanism and Mechanical-Thermal Correlation of Cemented Paste Backfill under Different Curing Temperatures

A Comparative Study on the Mechanical Properties and Microstructure of Cement-Based Materials by Direct Electric Curing and Steam Curing

Influence of Steam Curing on the Performance of High-strength Concrete Incorporating Metakaolin