Abstract:Very active 40%Ir–10%V–3%Mo/C and 40%Ir–10%V–10%Mo/C (in weight) catalysts, as novel, suitable anode electrode materials in polymer electrolyte membrane fuel cells (PEMFCs), have been synthesized by an ethylene glycol (EG) reduction method. The nanostructured catalysts have been characterized by X-ray diffraction (XRD) and high-resolution transmission electron microscopy (TEM). Ir nanoparticles, after modification with V and further with Mo, show a narrow particle size distribution centered at 2 nm, and are uniformly dispersed on Vulcan XC-72 supports. Investigation of the catalytic activity by means of linear sweep voltammetry (LSV) employing a rotating disk electrode (RDE) has revealed that 40%Ir–10%V–10%Mo/C catalyst exhibited very high electrocatalytic activity toward the hydrogen oxidation reaction (HOR). About 77% higher current density was obtained for 40%Ir–10%V–10%Mo/C compared to that of 40 wt.% commercial carbon-supported platinum catalyst (Pt/C), and 282% higher current density compared to that of the pure 40 wt.% Ir/C at 0.1 V versus RHE. The performance of a membrane electrode assembly (MEA) prepared with the 40%Ir–10%V–10%Mo/C as the anode catalyst generated a maximum power density of 598.4 mW cm−2 at 70 °C, which is 26.4% higher than that of commercially available Pt/C under air/H2 testing condition. The ternary 40%Ir–10%V–10%Mo/C catalyst was also tested for 10 ppm CO tolerance, and the results showed that the 40%Ir–10%V–10%Mo/C has much better CO tolerance than commercial Pt/C catalyst. The mechanism of the ternary 40%Ir–10%V–10%Mo/C catalyst may be a bi-functional mechanism.

Electro-catalytic activity of enhanced CO tolerant cerium-promoted Pt/C catalyst for PEM fuel cell anode

High specific surface area Ce0.8Zr0.2O2 promoted Pt/C electro-catalysts for hydrogen oxidation and CO oxidation reaction in PEMFCs

Highly Active Carbon-Supported Pt Nanoparticles Modified and Dealloyed with Co for the Oxygen Reduction Reaction

Carbon‐supported Pt‐Co Nanowires As a Novel Cathode Catalyst for Proton Exchange Membrane Fuel Cells

Effect of Heat Treatment on the Activity and Stability of PtCo/C Catalyst and Application of In-Situ X-ray Absorption Near Edge Structure for Proton Exchange Membrane Fuel Cell

New non-platinum Ir-V-Mo electro-catalyst, catalytic activity and CO tolerance in hydrogen oxidation reaction

Synergistic Effect of CeO2CeO2 Modified Pt/C Electrocatalysts on the Performance of PEM Fuel Cells

Surface Anion Promotes Pt Electrocatalysts with High CO Tolerance in Fuel-Cell Performance

CO-Tolerant PEMFC Anodes Enabled by Synergistic Catalysis between Iridium Single-Atom Sites and Nanoparticles

Enhancing CO Tolerance in PEMFC Anodes Via Thermal Oxidation Induced RuO2 Blocking Shell on a PtRu/C Catalyst

Highly dispersed ultrafine PtCo alloy nanoparticles on unique composite carbon supports for proton exchange membrane fuel cells

CO-tolerant PtRu@h-BN/C Core–shell Electrocatalysts for Proton Exchange Membrane Fuel Cells

Enhancing CO Tolerance in PEMFC Anodes via Thermal Oxidation Induced RuO 2 Blocking Shell on a PtRu/C Catalyst

Atomically Dispersed Ce Sites Augmenting Activity and Durability of Fe-Based Oxygen Reduction Catalyst in PEMFC

Application of Pt-Co Nanoparticles Supported on CeO2-C As Electrocatalyst for Direct Methanol Fuel Cell

Triple-Phase Interfacial Engineering Pt-Ceo2-Nitrogen-Doped Carbon Electrocatalysts for Proton Exchange Membrane Fuel Cells

Pt3Co/C Catalyst on the Nitrogen-Doped Carbon Support with High Catalytic Activity and Stability

Enhanced Sulfur and Carbon Coking Tolerance of Novel Co-Doped Ceria Based Anode for Solid Oxide Fuel Cells

Synergistic Ru/CeO 2 heterostructure for alkaline hydrogen oxidation with high activity and CO tolerance

Triple-phase interfacial engineering Pt-CeO 2 -nitrogen-doped carbon electrocatalysts for proton exchange membrane fuel cells

Mesoporous CeO2–C hybrid spheres as efficient support for platinum nanoparticles towards methanol electrocatalytic oxidation