Abstract:In this study, a novel approach is proposed by integrating the finite element tearing and interconnecting (FETI) method into the B-differentiable equations (BDEs) method for the analysis of 3D elastic frictional contact problem with small deformations. The contact blocks are divided into several nonoverlapping substructures with nonconforming meshes on the contact surface and the interface between two adjacent substructures. The enforcement of contact conditions and interface continuity conditions is achieved by using dual Lagrange multipliers discretized on the slave surface, typically defined with fine meshes. The modified Boolean transformation matrix is utilized to convert the contact stress into the equivalent nodal force. For large-scale elastic contact problems, the equilibrium equations for substructures and the relationship between the relative displacements and contact stresses on the contact surfaces and interfaces (i.e., the contact flexibility matrix) are efficiently computed using the FETI method. Subsequently, the governing equations consisting of the contact equations, interface continuity equations, and equilibrium equations for each floating substructure are uniformly formulated as the BDEs. These BDEs can be solved using the B-differentiable damped Newton method (BDNM). The proposed method harnesses the parallel scalability of the FETI method and extends the applicability of the BDEs algorithm, benefiting from its ability to precisely satisfy the contact constraints and theoretically ensure convergence when solving large-scale contact problems. The Hilber/Hughes/Taylor (HHT) time integration scheme is employed to investigate elastic dynamic contact problems. Numerical examples demonstrate the accuracy, convergence rate, and parallel scalability of the proposed algorithm.

Symmetric-Iterative Solution of Coupled BE and FE Discretizations for Elastoplastics

Symmetric-iterative FE and BE coupling method for solving axisymmetric problems

An Iterative FE–BE Coupling Method for Elastostatics

Stable non-symmetric coupling of the finite volume and the boundary element method for convection-dominated parabolic-elliptic interface problems

An adaptive non-symmetric finite volume and boundary element coupling method for a fluid mechanics interface problem

An h-hierarchical adaptive scaled boundary finite element method for elastodynamics

Iterative Coupling of Precise Integration FEM and TD-BEM for Elastodynamic Analysis

An Adaptive Scaled Boundary Finite Element Method by Subdividing Subdomains for Elastodynamic Problems

2-D Elastostatic Analysis by a Symmetric BEM/FEM Scheme

An Iterative Decomposition Coupling Algorithm Between TD-FEM and TD-BEM with Independent Spatial Discretization on the Interface

Non-conforming Interface Coupling and Symmetric Iterative Solution in Isogeometric FE–BE Analysis

The Application of FEM-BEM Coupling Method for Steady 2D Heat Transfer Problems with Multi-Scale Structure

An Adaptive Time-Stepping Procedure Based On The Scaled Boundary Finite Element Method For Elastodynamics

A New BEM for Solving 2D and 3D Elastoplastic Problems Without Initial Stresses/strains

Dynamic elastoplastic analysis by BEM/FEM

Finite Element Method and Boundary Element Method Iterative Coupling Algorithm for 2-D Elastodynamic Analysis

An Iterative FE–BE Method and Rectangular Cell Model for Effective Elastic Properties of Doubly Periodic Anisotropic Inclusion Composites

Numerical Implementation of an Implicit BEM Scheme with the Consistent Tangent Operator in Axisymmetric Elastoplasticity

A New Iterative Method for Linear Systems from XFEM

Isogeometric FE-BE Method with Non-Conforming Coupling Interface for Solving Elasto-Thermoviscoelastic Problems

A FETI B-differentiable equation method for elastic frictional contact problem with nonconforming mesh