Abstract:Sensorless control of permanent magnet synchronous motor (PMSM) can increase the reliability of electric actuators of more electrical aircraft. Numerical online parameter estimation method will enhance the performance for sensorless control methods based on sliding mode observer (SMO). However, numerical online parameter identification methods typically assume zero rotor position estimation error to ensure full rank of the identification equation set. This assumption actually leads to errors in parameter identification, resulting in steady-state errors in rotor position estimation. This paper focuses on a compensation method for PMSM online parameter identification that takes into account rotor position estimation error. This method is used for sensorless control based on SMO, using model reference adaptive systems for online parameter identification, and no additional parameter adjustment required. Validation is conducted on a PMSM experimental platform with maximum load of 15kW. The experimental results of 1000 r/min steady state operation proved the effectiveness of the method, and the dynamic experiments with 5 and 15kW loads proved that the method has no significant adverse effect on the system dynamics. When using model reference adaptive systems-based parameter identification methods for sliding mode observer-based sensorless control of permanent magnet synchronous motor, it is usually need to assumed that the rotor position estimation error is zero, but this error cannot be ignored in reality. A compensation scheme is proposed which is free of additional parameter debugging for sensorless control in high-speed range to reduce rotor position estimation error, improve parameter identification accuracy and performance of the system. image

A Simplified Model Based Inertia Identification Algorithm with Error Compensation of Permanent Magnet Synchronous Motors

Sensorless interior permanent magnet synchronous motor control with rotational inertia adjustment

A Novel Moment of Inertia Identification Strategy for Permanent Magnet Motor System Based on Integral Chain Differentiator and Kalman Filter

Sensorless Interior-Pmsm Control with Rotational Inertia Adjustment

On-Line Identification of Moment of Inertia for Permanent Magnet Synchronous Motor Based on Model Reference Adaptive System

Sensorless IPMSM Control Based on an Extended Nonlinear Observer with Rotational Inertia Adjustment and Equivalent Flux Error Compensation

A Model Reference Adaptive Sliding Mode Control for the Position Control of Permanent Magnet Synchronous Motor.

Sensorless Control Of Permanent Magnet Synchronous Motors With Compensation For Parameter Uncertainty

A self-tuning speed control method for permanent magnet synchronous motors based on the parameter identification

A VFF-RLS Method of Inertia Identification for PMSM.

Improved MRAS Parameter Identification Method for PMSM Based on Permanent Magnet Flux Linkage Free Model

Single‐loop Model Prediction Control of PMSM with Moment of Inertia Identification

An Identification Method of Equivalent Mechanical Parameters of Ironless Permanent Magnet Synchronous Linear Motor Based on Stribeck Model

Two-Dof Speed Control Of Permanent Magnet Synchronous Machine With A Novel Parameter Identification Method

Adaptive Flux Estimation and Parameters Identification of Induction Motors Based on Model Reference Approach

Dynamic Surface Method-Based Adaptive Backstepping Control for the Permanent Magnet Synchronous Motor on Parameter Identification.

A compensation method for PMSM sensorless control with parameter identification considering SMO observation error

Parameter Identification about Enhanced Magnetism Motor

Adaptive Speed Control for Permanent-Magnet Synchronous Motor System With Variations of Load Inertia

Inertia Identification Based on Model Reference Adaptive System with Variable Gain for AC Servo Systems

Closed-loop parameter identification of permanent magnet synchronous motor considering nonlinear influence factors