Abstract:STATEMENT OF PROBLEM:Existing virtual articulators simulate mandibular movement by using various parameters and are used to design restorations. However, they are not able to reproduce actual patient movements, and the designs of occlusal wear facets by them and by personalized mandibular movement have not been compared.PURPOSE:The purpose of this clinical study was to establish a clinical application protocol for a virtual articulator based on previous research and to evaluate the accuracy of the occlusal wear facets designed by it.MATERIAL AND METHODS:The gypsum casts of 12 participants were scanned with a cast scanner as the original data. A single crown, 3-unit splinted crowns, a 5-unit fixed partial denture, and a fixed complete denture were virtually prepared on the digital mandibular casts by using the Geomagic Studio 2013 software program. High points were created at the wear facets, and corresponding digital wax patterns with occlusal interferences were generated. The exocad software program was used to design corresponding restorations with the copy method. Static (STA restoration) and dynamic (DYN restoration) occlusal adjustments were carried out with the built-in virtual articulator. The mandibular movements of participants were recorded by the novel virtual articulator system, and the occlusal surfaces of the digital wax patterns were adjusted (FUN restoration). The restorations adjusted with the 3 methods were compared with the original data. The mean value and root mean square (RMS) of 3D deviation and positive volumes (V+) in the occlusal direction were measured. Depending on the normality, 1-way ANOVA and the Kruskal-Wallis test were used to analyze the influence of occlusal surface design methods on the morphology of occlusal wear facets (α=.05).RESULTS:The mean deviation of the 4 kinds of STA restorations ranged from 0.19 mm to 0.22 mm, the DYN restorations from 0.13 mm to 0.17 mm, and the FUN restorations from 0.03 mm to 0.09 mm. A significant difference was found between the STA and FUN restorations of the 3-unit splinted crowns and 5-unit fixed partial dentures (Ρ=.013, Ρ=.021). The mean values of 3D deviation and V+ decreased from the STA group to the DYN group and then to the FUN group. The RMS and V+ were statistically similar (Ρ>.05).CONCLUSIONS:The preliminary results of the study indicate that the FUN 3-unit splinted crowns and 5-unit fixed partial dentures designed with the self-developed virtual articulator were better than the STA restorations. The FUN restorations were more coincident with the morphology of the wear facets on the original teeth.

Development of Adjustable Sculpting Apparatus for Dental Crown Shape Specimen

Digital Modeling Technology for Full Dental Crown Tooth Preparation

[Initial Evolution Research for Design and Process Accuracy of One Type of Domestic Computer Aided Design Soft and Computer Aided Manufacture].

Preliminary Study on Computer-Aided Design of Full Crown

The Research and Development of CAD-CAM System in Restorative Dentistry.

Quantitative Evaluation of Tissue Surface Adaption of CAD-Designed and 3D Printed Wax Pattern of Maxillary Complete Denture

Three-Dimensional Analysis of Internal Adaptations of Crowns Cast from Resin Patterns Fabricated Using Computer-Aided Design/Computer- Assisted Manufacturing Technologies

Preliminary Study on the Methodology of Computer-aided Design and Manufacturing of the Coping Crown

Design of Occlusal Wear Facets of Fixed Dental Prostheses Driven by Personalized Mandibular Movement.

Modified CAD/CAM Wax: The Dimension Accuracy of Wax/Metal Copy Patterns

Comparison of the morphological accuracy of automatic crowns designed by multiple computer-aided design software programs with different levels of dentition information acquisition

Design of Wear Facets of Mandibular First Molar Crowns by Using Patient-Specific Motion with an Intraoral Scanner: A Clinical Study.

Establishment of the ideal 3-D tooth crowns and development of its operating program

Research and development of CAD system of coping crown

Study on Functional Occlusal Morphology by Using Three-Dimensional Printed Diagnostic Crown and Functional Generated Path Technology

Custom Fabrication of Try-In Wax Complete Denture

Occlusal Contact and Clearance of Posterior Implant-Supported Single Crowns Designed by Two Different Methods: a Self-Controlled Study

Accuracy of three digital waxing-guided trial restoration protocols for controlling the depths of tooth preparation for ceramic veneers

Digital Inlaid Design Based on Anatomical Characteristics and Preliminary Implementation of Its Program

[A Computer Aided Design Approach of All-Ceramics Abutment for Maxilla Central Incisor].

Accuracy Evaluation of a New Three-Dimensional Reproduction Method of Edentulous Dental Casts, and Wax Occlusion Rims with Jaw Relation.