Abstract:VO2 nanobelts with metal–semiconductor properties were prepared through low temperature hydrothermal reaction and post annealing. X-Ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), differential scanning calorimetry (DSC) and UV-vis-NIR spectrophotometry were employed to investigate the evolution of structure, morphology and properties of the VO2 nanobelts. The results illustrate that the pure VO2 (B) nanobelts can be obtained by hydrothermal reaction. The shape of the nanobelts evolves with hydrothermal temperature, time and reactant concentration. With the increasing of hydrothermal temperature from 160 °C to 200 °C, the nanobelts become homogenous and regular. The regular nanobelts are also obtained by the decrease of V2O5 concentration. Samples prepared at 200 °C over 48 h have superior morphology and crystallinity. After annealing, VO2 (B) can be transformed into VO2 (M), which is dependent on the hydrothermal conditions. Samples prepared at 160 °C over 48 h and 180 °C over 48 h can be transformed into VO2 (M) at 450 °C over 2 h, while samples obtained at 200 °C over 48 h should be annealed at 500 °C for 2 h. The nanobelts are transformed into irregular nanostructures, nanorods and nanobelts at the hydrothermal temperatures of 160 °C, 180 °C and 200 °C, respectively. However, samples prepared at 200 °C over 48 h with a V2O5 concentration of 0.0125 M can keep the intact nanobelts after annealing. The DSC analysis proves that the VO2 (M) shows good phase transition behavior around 68 °C and the phase transition temperature can be reduced to 58 °C by 0.5 at% tungsten doping. After mixing the VO2 (M) with acrylic resin, the visible transmission of the VO2 composite coating on glass is up to 52.2% and the solar modulation at 2000 nm is up to 31.5%, which means that it is a good candidate for smart windows.

Preparation and Gas Sensing Properties of Vanadium Oxide Nanobelts Coated with Semiconductor Oxides

Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Vanadium Pentoxide Nanobelts and Nanorolls: from Controllable Synthesis to Investigation of Their Electrochemical Properties and Photocatalytic Activities

Study the properties of Ball-Milled Vanadium Oxide Powders for Gas Sensor Applications

The controlled deposition of metal oxides onto carbon nanotubes by atomic layer deposition: examples and a case study on the application of V2O4 coated nanotubes in gas sensing

Vanadium Pentoxide Nanobelts: Highly Selective and Stable Ethanol Sensor Materials

Synthesis and Characterization of Vanadium Doped Zinc Oxide Thick Film for Chemical Sensor Application

Gas Sensing Characteristics of Nano-Structured Metal Oxides

Synthesis and H2 Gas-Sensing Property of ZnO Nanobelts

Preparation and morphology controlling of Co3O4 nanostructures and their gas-sensing properties

Diethylamine gas sensor using V2O5-decorated alpha-Fe2O3 nanorods as a sensing material

Preparation and gas-sensitive properties of hollow Zn2SnO4/SnO2 nano-cubes

Vanadium oxide nanostructures for chemiresistive gas and vapour sensing: a review on state of the art

Preparation and gas-sensing property of ultra-fine NiO/SnO2 nano-particles

Preparation and Gas Sensing Properties of SnO2 Nanocrystals Modified Porous Co3O4 Nanorods

Synthesis and Gas Sensitivities of SnO2 Nanorods and Hollow Microspheres

The Sensitizing Effect of Enhanced NO2 Gas Sensing at Near-Room Temperature Using Pd-Decorated VO2 Nanowires

Preparation and Gas Sensitivity Properties of ZnFe2O4 Semiconductors

High energy facets and oxygen vacancies guided hierarchical tin dioxide microcubes assembled by cross-stacked nanoslices for ethanol gas-sensing

A Facile Process to Prepare One Dimension VO2nanostructures with Superior Metal–semiconductor Transition