Abstract:The clarification of the critical operating conditions and the failure mechanism of superlubricity systems is of great significance for seeking appropriate applications in industry. In this work, the superlubricity region of 1,3-diketone oil EPND (1-(4-ethyl phenyl) nonane-1,3-dione) on steel surfaces was identified by performing a series of ball-on-disk rotation friction tests under various normal loads (3.5–64 N) and sliding velocities (100–600 mm/s). The result shows that beyond certain loads or velocities superlubricity failed to be reached due to the following negative effects: (1) Under low load (≤ 3.5 N), insufficient running-in could not ensure good asperity level conformity between the upper and lower surfaces; (2) the high load (≥ 64 N) produced excessive wear and big debris; (3) at low velocity (≤ 100 mm/s), the weak hydrodynamic effect and the generated debris deteriorated the lubrication performance; (4) at high velocity (≥ 500 mm/s), oil migration occurred and resulted in oil starvation. In order to expand the load and velocity boundaries of the superlubricity region, an optimized running-in method was proposed to avoid the above negative effects. By initially operating a running-in process under a suitable combination of load and velocity (e.g. 16 N and 300 mm/s) and then switching to the target certain higher or lower load/velocity (e.g. 100 N), the superlubricity region could break through its original boundaries. The result of this work suggests that oil-based superlubricity of 1,3-diketone is a promising solution to friction reduction under suitable operating conditions especially using a well-designed running-in strategy.

Effects of Pfpe Lubricant Properties on the Critical Clearance and Rate of the Lubricant Transfer from Disk Surface to Slider

A Molecular Dynamics Study on Lubricant Perfluoropolyether in Hard Disk Driver

Study on the Cyclotriphosphazene Film on Magnetic Head Surface

Study on the structure and spreading properties of hard disk lubricants

Effects of End Groups on the Tribochemical Reactions of Lubricants at Head-Disk Interface

Improved boundary lubrication of perfluoropolyether using fluoropolymer-grafted cellulose nanocrystal

Load and velocity boundaries of oil-based superlubricity using 1,3-diketone

The effects of filler type on the friction and wear performance of PEEK and PTFE composites under hybrid wear conditions

Geometry Effect of Different PTFE Fillers on Self-Lubricating PF Composites: Mechanical and Tribological Properties

Stability of Lubricant Perfluoropolyether Films

Effect of Transfer Films on Friction of PTFE/PEEK Composite

Molecular Dynamics Simulations Of Lubricant Spreading On Lubricant-Patterned Substrates

Mechanism of Superlubricity Conversion with Polyalkylene Glycol Aqueous Solutions

Modeling Of Lubricant Spreading On A Solid Substrate

Experimental Investigation of Lubrication Failure of Polyalphaolefin Oil Film at High Slide/Roll Ratios

Experimental Investigation of Transfer of PTFE on Bearing Steel

Effects of Surface Physicochemical Properties on the Tribological Properties of Liquid Paraffin Film in the Nanoscale

Experimental Study of the Slider-Lube/Disk Contact State and Its Effect on Head-Disk Interface Stability

Competitive Molecular Interaction between Zinc Dialkydithiophosphate (ZDDP) and Methyl Oleate along Boundary Lubrication Regime

Experimental Investigation of Tribological Performance of Ptfe-Derived Solid Lubricants in Sliding Building Bearings

Tribological Behaviors of Several Polymer–polymer Sliding Combinations under Dry Friction and Oil-Lubricated Conditions