Abstract:Porous scaffolds have recently attracted attention in bone tissue engineering. The implanted scaffolds are supposed to satisfy the mechanical and biological requirements. In this study, two porous structures named MFCC-1 (modified face centered cubic-1) and MFCC-2 (modified face centered cubic-2) are introduced. The proposed porous architectures are evaluated, optimized, and tested to enhance mechanical and biological properties. The geometric parameters of the scaffolds with porosities ranging from 70% to 90% are optimized to find a compromise between the effective Young's modulus and permeability, as well as satisfying the pore size and specific surface area requirements. To optimize the effective Young's modulus and permeability, we integrated a mathematical formulation, finite element analysis, and computational fluid dynamics simulations. For validation, the optimized scaffolds were 3D-printed, tested, and compared with two different orthogonal cylindrical struts (OCS) scaffold architectures. The MFCC designs are preferred to the generic OCS scaffolds from various perspectives: a) the MFCC architecture allows scaffold designs with porosities up to 96%; b) the very porous architecture of MFCC scaffolds allows achieving high permeabilities, which could potentially improve the cell diffusion; c) despite having a higher porosity compared to the OCS scaffolds, MFCC scaffolds improve mechanical performance regarding Young's modulus, stress concentration, and apparent yield strength; d) the proposed structures with different porosities are able to cover all the range of permeability for the human trabecular bones. The optimized MFCC designs have simple architectures and can be easily fabricated and used to improve the quality of load-bearing orthopedic scaffolds. STATEMENT OF SIGNIFICANCE: Porous scaffolds are increasingly being studied to repair large bone defects. A scaffold is supposed to withstand mechanical loads and provide an appropriate environment for bone cell growth after implantation. These mechanical and biological requirements are usually contradicting; improving the mechanical performance would require a reduction in porosity and a lower porosity is likely to reduce the biological performance of the scaffold. Various studies have shown that the mechanical and biological performance of bone scaffolds can be improved by internal architecture modification. In this study, we propose two scaffold architectures named MFCC-1 and MFCC-2 and provide an optimization framework to simultaneously optimize their stiffness and permeability to improve their mechanical and biological performances.

Morphology-Controllable Modeling Approach for A Porous Scaffold Structure in Tissue Engineering

Efficient Biscale Design of Semiregular Porous Structures with Desired Deformation Behavior

A novel bone scaffold design approach based on shape function and all-hexahedral mesh refinement.

A control approach for pore size distribution in the bone scaffold based on the hexahedral mesh refinement

Design and analysis of the mechanical properties of controllable porous scaffolds for bone tissue engineering

Design and properties of biomimetic irregular scaffolds for bone tissue engineering

Porous Structure Design in Tissue Engineering Using Anisotropic Radial Basis Function

Porous scaffold design by solid T-splines and triply periodic minimal surfaces

Biological and mechanical property analysis for designed heterogeneous porous scaffolds based on the refined TPMS

Free-form Multi-Level Porous Model Design Based on Truncated Hierarchical B-spline Functions.

Multi-objective Shape Optimization of Bone Scaffolds: Enhancement of Mechanical Properties and Permeability

Heterogeneous Porous Scaffold Generation Using Trivariate B-spline Solids and Triply Periodic Minimal Surfaces

Simultaneous Optimized Mechanical Stiffness and Cell Growth on Scaffold by Morphology Learning

Computer-aided Design of Porous Artifacts.

Effect of Structure on Osteogenesis of Bone Scaffold: Simulation Analysis Based on Mechanobiology and Animal Experiment Verification

Analysis of Mechanical Properties and Permeability of Trabecular-Like Porous Scaffold by Additive Manufacturing

Computer-aided characterization for effective mechanical properties of porous tissue scaffolds

Roles of Irregularity of Pore Morphology in Osteogenesis of Voronoi Scaffolds: from the Perspectives of MSC Adhesion and Mechano-Regulated Osteoblast Differentiation.

Topological shape optimization of multifunctional tissue engineering scaffolds with level set method

Analysis of mechanical characteristics and permeability of TPMS and Voronoi porous structure for bone scaffold

Modeling, Assessment, and Design of Porous Cells Based on Schwartz Primitive Surface for Bone Scaffolds