Abstract:This paper describes the novel preparation of three kinds of nanofibers [poly(styrene-co-methacrylic acid), poly(styrene-co-p-styrene sulfonate), polystyrene] investigated as solid-phase extraction (SPE) sorbents to extract six compounds (nitrobenzene, 2-naphthol, benzene, n-butyl p-hydroxybenzoate, naphthalene, p-dichlorobenzene) in environmental water by high-performance liquid chromatography. Parameters affecting extraction efficiency were investigated in detail to explore the extraction mechanism of the nanofibers. Under optimized conditions, six compounds followed an excellent linear relationship in the range 10-5,000 ng mL(-1) with coefficients of determination (r(2)) greater than 0.99. The repeatability (expressed as relative standard deviations) was from 3.0 to 7.0%, corresponding to 2.0 mL of water samples at 25 and 500 ng mL(-1) spiked levels for the six compounds. The limits of detection varied from 0.01 to 0.15 ng mL(-1) (signal-to-noise ratio of3). A comparison of the SPE using nanofibers as sorbents and the most commonly used octadecylsilica SPE cartridges was carried out in terms of absolute recovery, sensitivity, and reproducibility for the compounds investigated. Finally, the method was applied to four real water samples. The results highlighted the importance of functional groups, and the polarity of nanofibers in controlling sorption of target compounds, and clearly showed that the new method could be a viable and environmentally friendly technique for analyzing pollutants in environmental samples.

The Research Development of Polar Organic Pollutants Extraction and Detection with Solid-phase Extraction Sorbents

Solid phase microextraction for the bioanalysis of emerging organic pollutants

Research Progress in Solid Phase Microextraction

Recent Materials Developed for Dispersive Solid Phase Extraction

Recent Progress and Applications of Advanced Nanomaterials in Solid‐Phase Extraction

Recent advances in solid-phase sorbents for sample preparation prior to chromatographic analysis

New materials in sorptive extraction techniques for polar compounds

Preparation and Characteristics of New Coating for Solid-Phase Microextraction.

New Hypercrosslinked Polymer Adsorbents for Solid Phase Extraction of Polar Compounds

THE DEVELOPMENT OF MOLECULARLY IMPRINTED TECHNIQUE COUPLED WITH SOLID PHASE MICROEXTRACTION

Application of Molecularly Imprinted Solid Phase Extraction in the Assay of Environmental Samples

Solid-Phase Microextraction in the Pretreatment of Environmental Samples

Solid-Phase Microextraction Fibers Based on Novel Materials: Preparation and Application

Materials for Solid-Phase Extraction of Organic Compounds

Optimization of Solid-Phase Extraction for Enrichment of Toxic Organic Compounds in Water Samples

Electrospun Polymer Nanofibers As A Solid-Phase Extraction Sorbent for the Determination of Trace Pollutants in Environmental Water

Past, Present, and Future of Solid Phase Extraction: A Review

Analysis of unknown organic pollutants in sewage by solid-phase extraction combined with gas chromatography-mass spectrometry.

Application of molecularly imprinted polymers to solid-phase extraction of analytes from real samples.

A Critical Review of Molecularly Imprinted Solid Phase Extraction Technology

Progress in Adsorption Materials for Solid Phase Extraction of Organophosphorus Pesticides