Abstract:A peculiar nanostructure consisting of nitrogen-doped, carbon-encapsulated (N-C) SnO2@Sn nanoparticles grafted on three-dimensional (3D) graphene-like networks (designated as N-C@SnO2@Sn/3D-GNs) has been fabricated via a low-cost and scalable method, namely an in situ hydrolysis of Sn salts and immobilization of SnO2 nanoparticles on the surface of 3D-GNs, followed by an in situ polymerization of dopamine on the surface of the SnO2/3D-GNs, and finally a carbonization. In the composites, three-layer core-shell N-C@SnO2@Sn nanoparticles were uniformly grafted onto the surfaces of 3D-GNs, which promotes highly efficient insertion/extraction of Li(+). In addition, the outermost N-C layer with graphene-like structure of the N-C@SnO2@Sn nanoparticles can effectively buffer the large volume changes, enhance electronic conductivity, and prevent SnO2/Sn aggregation and pulverization during discharge/charge. The middle SnO2 layer can be changed into active Sn and nano-Li2O during discharge, as described by SnO2 + Li(+) → Sn + Li2O, whereas the thus-formed nano-Li2O can provide a facile environment for the alloying process and facilitate good cycling behavior, so as to further improve the cycling performance of the composite. The inner Sn layer with large theoretical capacity can guarantee high lithium storage in the composite. The 3D-GNs, with high electrical conductivity (1.50 × 10(3) S m(-1)), large surface area (1143 m(2) g(-1)), and high mechanical flexibility, tightly pin the core-shell structure of the N-C@SnO2@Sn nanoparticles and thus lead to remarkably enhanced electrical conductivity and structural integrity of the overall electrode. Consequently, this novel hybrid anode exhibits highly stable capacity of up to 901 mAh g(-1), with ∼89.3% capacity retention after 200 cycles at 0.1 A g(-1) and superior high rate performance, as well as a long lifetime of 500 cycles with 84.0% retention at 1.0 A g(-1). Importantly, this unique hybrid design is expected to be extended to other alloy-type anode materials such as silicon, germanium, etc.

Encapsulation of Sn@carbon Nanoparticles in Bamboo‐like Hollow Carbon Nanofibers As an Anode Material in Lithium‐Based Batteries

A Film of Porous Carbon Nanofibers That Contain Sn/SnOx Nanoparticles in the Pores and Its Electrochemical Performance As an Anode Material for Lithium Ion Batteries

Sn Nanoparticles Encapsulated in 3d Nanoporous Carbon Derived from A Metal-Organic Framework for Anode Material in Lithium-Ion Batteries

Sn‐Based Nanoparticles Encapsulated in a Porous 3D Graphene Network: Advanced Anodes for High‐Rate and Long Life Li‐Ion Batteries

Tin Nanoparticles Encapsulated in Porous Multichannel Carbon Microtubes: Preparation by Single-Nozzle Electrospinning and Application As Anode Material for High-Performance Li-based Batteries.

Hierarchical SnO2/Carbon Nanofibrous Composite Derived from Cellulose Substance as Anode Material for Lithium‐Ion Batteries

Hollow Porous CoSnO x Nanocubes Encapsulated in One-Dimensional N-Doped Carbon Nanofibers as Anode Material for High-Performance Lithium Storage

SnO 2 nanoparticles encapsulated in micro / mesoporous carbon foam as a high-performance anode material for lithium ion batteries †

Hierarchical Composite from Carbon Nanofibers Wrapped SnS Core–Shell Nanoparticles as an Anode for Lithium-Ion Batteries

Nitrogen-Doped Carbon-Encapsulated SnO2@Sn Nanoparticles Uniformly Grafted on Three-Dimensional Graphene-like Networks as Anode for High-Performance Lithium-Ion Batteries

Encapsulating homogenous ultra-fine SnO2/TiO2 particles into carbon nanofibers through electrospinning as high-performance anodes for lithium-ion batteries

Encapsulating Tin Dioxide@Porous Carbon in Carbon Tubes: A Fiber-In-Tube Hierarchical Nanostructure for Superior Capacity and Long-Life Lithium Storage

SnSb Alloy Nanoparticles Embedded in N-doped Porous Carbon Nanofibers As a High-Capacity Anode Material for Lithium-Ion Batteries

Design and Synthesis of Graphene/sno2/polyacrylamide Nanocomposites As Anode Material for Lithium-Ion Batteries

Facile encapsulation of nanosized SnO2 particles in carbon nanotubes as an efficient anode of Li-ion batteries

Well-dispersed tin nanoparticles encapsulated in amorphous carbon tubes as high-performance anode for lithium ion batteries

Organic molecule confinement reaction for preparation of the Sn nanoparticles@graphene anode materials in Lithium-ion battery

Fabrication of Carbon Nanofiber-Driven Electrodes from Electrospun Polyacrylonitrile/Polypyrrole Bicomponents for High-Performance Rechargeable Lithium-Ion Batteries

SnLi4.4 Nanoparticles Encapsulated in Carbon Matrix As High Performance Anode Material for Lithium-Ion Batteries

Hollow Porous CoSnOx Nanocubes Encapsulated in One-Dimensional N-Doped Carbon Nanofibers As Anode Material for High-Performance Lithium Storage

Cross‐Stacked Carbon Nanotube Sheets Uniformly Loaded with SnO2 Nanoparticles: A Novel Binder‐Free and High‐Capacity Anode Material for Lithium‐Ion Batteries