Abstract:The critical cooling rate (Rc) calculated on the basis of the time-temperature-transformation (TTT) curve was taken as the intrinsic criteria of reflecting the glass forming ability (GFA) for the amorphous alloy. The TTT curves were plotted based on the isothermal Wheeler-Boettinger-McFadden (WBM) phase field method (PFM). By analyzing the TTT curves, the influence of different activation energy parameters E and Q for the interface mobility M and nucleation rate P respectively on Rc and GFA were investigated for Fe-25%B (mole fraction) binary amorphous alloy in present paper. The results showed that the activation energy E for the interface mobility M had litter influence on the nose temperature and time for the TTT curves. Under the different thermal activation energy Q1, Q2 and Q3 for the nucleation rate P, the temperatures and times corresponding to the nose tip were 500K, 600K, 775K and 6.2×10−4s, 4.5×10−4s, 9.5×10−4s, respectively, and the calculated values of Rc were 1.57×106K/s, 1.93×106K/s, 7.35×105K/s, respectively, which were in the range of 6.4×105 ~ 6.8×106K/s from the experimental measurements. Under the influence of thermal activation energy Q, the nose tip temperature increased, which meant Q controlled the nose tip temperature, while the higher Q would not get the perfect C shape. It was found that the values of Rc calculated based on the TTT curves by the PFM were in good agreement with the reported experimental values, which verified the feasibility of the glass prediction and the research of the intrinsic physical mechanism of the GFA by the PFM.

Correlations Between Apparent Activation Energy and Thermostability and Glass Forming Ability for Fe Based Metallic Glasses

Non-isothermal crystallization kinetics and glass-forming ability of Ti41Zr25Be28Fe6 bulk metallic glass investigated by differential scanning calorimetry

Non-isothermal crystallization kinetics and glass-forming ability of Ti 41 Zr 25 Be 28 Fe 6 bulk metallic glass investigated by differential scanning calorimetry

Gibbs Free Energy and Activation Energy of Zrtialnicusn Bulk Glass Forming Alloys

Crystallization Kinetics of the Fe68Nb6B23Mo3 Glassy Ribbons Studied by Differential Scanning Calorimetry

Thermodynamic Characteristics of Ti-based Glass-Forming Alloys

Prediction of the Glass Forming Ability in a Fe-25%B Binary Amorphous Alloy Based on Phase-Field Method

Correlation between the Arrhenius crossover and the glass forming ability in metallic glasses

Correlation between glass transition temperature and melting temperature in metallic glasses

A Relationship Between Glass-Forming Ability and Reduced Glass Transition Temperature Near Eutectic Composition

Effects of Alloying Elements on Crystallization Kinetics of Ti–Zr–Be Bulk Metallic Glass

The Relations Between ΔT and the Glass Forming Ability of Bulk Amorphous Zr–Cu–Ni–Al–Hf–Ti and Zr52.5Cu17.9Ni14.6Al10Ti5 Alloys

A New Criterion for Predicting the Glass-Forming Ability of Bulk Metallic Glasses

Crystallization kinetics of Hf28Be18Ti17Zr17Cu7.5Ni12.5 high-entropy bulk metallic glass

Nonisothermal Crystallization Kinetics, Fragility and Thermodynamics of Ti20Zr20Cu20Ni20Be20 High Entropy Bulk Metallic Glass

The effect of minor alloying on the glass forming ability and crystallization reaction of Ti32.8Zr30.2Cu9M5.3Be22.7 (M=Fe, Co, and Ni) bulk metallic glass

Effects of Fe Addition on Glass-Forming Ability and Mechanical Properties of Ti–Zr–Be Bulk Metallic Glass

Thermal Behavior and Non-Isothermal Crystallization Kinetics of (ti41zr25be28fe6)93cu7 Bulk Metallic Glass

Unusual relation between glass-forming ability and thermal stability of high-entropy bulk metallic glasses

On the New Criterion to Assess the Glass-Forming Ability of Metallic Alloys

Isothermal internal friction behaviour of a Zr based bulk metallic glass with large supercooled liquid region