4E analyses and multi-objective optimization for an innovative solar-ocean thermal energy conversion/air conditioning system
Zhen Tian,Xianzhi Zou,Yuan Zhang,Wenzhong Gao,Wu Chen,Hao Peng
DOI: https://doi.org/10.1016/j.jclepro.2023.137532
IF: 11.1
2023-06-08
Journal of Cleaner Production
Abstract:This paper proposes a solar-ocean thermal energy conversion system (S-OTEC/AC) with integrated air conditioning cycles to provide power, cooling capacity, and fresh water in the South China Sea. Solar energy and surface seawater are used as heat sources in S-OTEC/AC system, the deep-sea water is used to absorb heat. The organic Rankine cycle (ORC) is selected as the main cycle of OTEC, with R134a as the working medium. In order to improve the sustainability of the system, energy, exergy, economic, and environmental (4E) analysis models were proposed for the system. Parametric studies are performed to investigate the effects of R134a temperature at the evaporator outlet, turbine inlet, and outlet pressures, and water flow rate of solar heater on the system performance indicators. Furthermore, multi-optimization is conducted with the Levelized Cost Of Energy ( LCOE ) and the product of energy-exergy efficiencies ( η en,sys * η ex,sys ) as objective functions. The linear programming technique of multi-dimensional preference analysis (LINMAP) is introduced to make decisions on the Pareto front. Under basic conditions, the S-OTEC/AC system performs superior to the S-OTEC system in terms of energy, economy, and environmental friendliness. The additional profits of the AC cycle are represented by the annual water fee saving of 3.6x10 4 $/year and the cooling capacity of 85.8 kW, respectively. Sensitivity results show that water flow rate of solar heaters has the most obvious influence on system performance among the four key parameters. The results of optimizing the non-dominant scheme suggested by Pareto point show that optimized LCOE is 1.18 $/kWh, and η en,sys * η ex,sys is 7.81%. Under this condition, the system's network output, energy efficiency, and exergy efficiency are 89.32 kW,14.09%, and 52.83%, respectively.
environmental sciences,green & sustainable science & technology,engineering, environmental