Abstract:Gravity and/or flight acceleration would lead to significant buoyancy effect on heat transfer of a hydrocarbon fuel in the propulsion system. Large eddy simulations have been conducted to study upward flows and heat transfer of n-decane in a vertical tube at supercritical pressures. Detailed data analyses indicate that the fluid flow and heat transfer process with buoyancy effect can be divided into three stages. In the first stage, owing to the relatively low inlet Reynolds number, flow and heat transfer are initially in the laminar state. Large density reduction under strong heating at a supercritical pressure leads to flow acceleration, which is mainly due to buoyancy and helps improve heat transfer. Further downstream, buoyant acceleration results in an M shaped velocity profile, which promotes the shear production of turbulence. Turbulence is also strongly generated by buoyant production at this stage. In addition, viscous dissipation decreases at high temperature. These factors eventually cause turbulence transition. Heat transfer is thus significantly enhanced, and the wall temperature is drastically reduced. Comparing to the cases of forced convection, buoyancy could promote or delay turbulence transition under different surface heat fluxes. In the third stage, fluid flows and heat transfer enter the fully developed turbulence region, which is maintained mainly by the shear production mechanism. Numerical analyses herein would provide fundamental understanding of buoyancy effect on supercritical-pressure heat transfer of hydrocarbon fuel in the regenerative engine cooling application. (C) 2021 Elsevier Ltd. All rights reserved.

Deterioration in Heat Transfer of Endothermal Hydrocarbon Fuel

Numerical Investigation of Convective Heat Transfer of Supercritical Hydrocarbon Fuel in a Tube Filled With Porous Media

Modeling and Simulation of Supercritical-Pressure Turbulent Heat Transfer of Aviation Kerosene with Detailed Pyrolytic Chemical Reactions

A Numerical Study of Supercritical Forced Convective Heat Transfer of N-Heptane Inside A Horizontal Miniature Tube

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

Flow Dynamics in Transient Heat Transfer of N-Decane at Supercritical Pressure

Numerical Analysis of Convective Heat Transfer Characteristics of Supercritical Hydrocarbon Fuel in Cooling Panel with Local Flow Blockage Structure

Inhomogeneous Behavior of Supercritical Hydrocarbon Fuel Flow in a Regenerative Cooling Channel for a Scramjet Engine

Model Validation and Parametric Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Endothermic Pyrolysis at Supercritical Pressure

Experimental study on the thermodynamic characteristics of the high temperature hydrocarbon fuel in the cooling channel of the hypersonic vehicle

Heat Transfer of Hydrocarbon Fuel under Steady States and Pressure-Transient States

Heat Transfer Deterioration of Aviation Kerosene Flowing in Mini Tubes at Supercritical Pressures

Numerical heat transfer analysis of transcritical hydrocarbon fuel flow in a tube partially filled with porous media

Numerical Study on Turbulent Convective Heat Transfer with n-heptane Under Supercritical Pressures

Validation and analyses of RANS CFD models for turbulent heat transfer of hydrocarbon fuels at supercritical pressures

Large Eddy Simulations and Analyses of Hydrocarbon Fuel Heat Transfer in Vertical Upward Flows at Supercritical Pressures

Efficient utilization of heat sink of hydrocarbon fuel for regeneratively cooled scramjet

Numerical Investigation of the Thermal-Mechanical Behaviors in the Regenerative Cooling Channel Considering Thermal Pyrolysis

Numerical Study on Flow and Heat Transfer of Supercritical Hydrocarbon Fuel in Curved Cooling Channel

The heat transfer mechanism coupling pyrolysis and flow of hydrocarbon fuel in heated tube under supercritical pressure

Heat Transfer Characteristic Modelling and the Effect of Operating Conditions on Re-Cooled Cycle for A Scramjet