Abstract:It is apparent that the population, in general, is increasing and this rise in population increases both the waste production and energy requirements. The main objective of this study to tackle the increasing demand for energy and recycling waste into energy. We will be using Waste to Energy (WTE) technique to convert MSW into energy such as bio-fuel, Hydrogen-rich gas or Syngas. The model of simulation of steam gasification of MSW used in this study is based on ASPEN PLUS. Temperature, the ratio of steam to MSW, and the ratio of air to MSW have all been adjusted in a wide range. For the production of syngas, the impact of carbon conversion efficiency (CCE) and cold gas efficiency (CGE) has been studied. The results showed that by increasing the temperature from 700 °C to 1300 °C the H2 concentration increased from 37 to 51 mol%, CO concentration increases from 35 to 40 mol% and CO2 concentration decreases from 5 to 0.025 mol%. CGE also decreases from 95 to 82% while CCE increases from 80 to 85%. By increasing the steam to MSW ratio from 0.05 to 0.8 mass fraction the H2 concentration increased from 34 to 44 mol% but is maximum at 0.35 at which it is 53 mol%, CO concentration decreases from 43 to 16 mol% and CO2 concentration increases from 0.025 to 8.5 mol%. CGE and CCE also decreases from 94 to 45% and 90 to 44% respectively.And lastly by increasing the air to MSW ratio from 0.01 to 0.5 mass fraction the H2 concentration decreases from 47 to 39 mol% but peaks at 0.05 at which it is 48 mol%, CO concentration decreases from 41 to 31 mol% and CO2 concentration increases from 0.085 to 3.5 mol%. CGE and CCE also decreases from 92 to 55% and 87 to 70% respectively. To compare our data with the base case we have kept temperature at 900 °C S/MSW ratio at 0.11 and air/MSW ratio at 0.05 and it is concluded that our simulation is inline with the base case as our results are off by just 1–3% in terms of yield.

Simulation of Gasification and Melting of Municipal Solid Waste by Method of Gibbs Free Energy Minimization

Experimental Study and Simulation of Low-Temperature Gasification of Municipal Solid Waste in Circulated Fluidized Bed

Analysis on low-temperature polyethylene pyrolysis and gasification in different atmospheres

Gasification and Melting Characteristics of MSW in China

Experimental study on MSW gasification and melting technology

Research on Low Emission MSW Gasification and Melting System

Theoretical Calculation and Analysis on the Gasification and Melting Process of MSW with Oxygen-Enriched Air

Simulation of Municipal Solid Waste Gasification for Syngas Production in Fixed Bed Reactors

Thermodynamic Analysis of the Gasification of Municipal Solid Waste

A Steam Dried Municipal Solid Waste Gasification and Melting Process

Experimental Study on Fluidized-bed Gasification of Simulated MSW

Simulation of Syngas Production from Municipal Solid Waste Gasification in A Bubbling Fluidized Bed Using Aspen Plus

Experimental and Kinetic Modeling of Oxygen-Enriched Air Combustion of Municipal Solid Waste.

STUDY ON THE INFLUENCE OF MSW PROPERTIES UPON ITS GASIFIED PRODUCTS

Hydrogen Production with an Auto-Thermal MSW Steam Gasification and Direct Melting System: A Process Modeling

Analyses for Synthesis Gas from Municipal Solid Waste Gasification under Medium Temperatures

Thermodynamic Equilibrium Analysis on Limitation of Moisture and Ash for Optimal Air Gasification of Municipal Solid Waste

Effect of Operating Parameters and Moisture Content on Municipal Solid Waste Pyrolysis and Gasification

Aspen plus simulation model of municipal solid waste gasification of metropolitan city for syngas production

Municipal solid wastes pyro-gasification using high-temperature flue gas as heating resource and gasifying agent

STUDY ON SUITABILITY OF GASSIFICATION AND MELTING INCINERATIONTHE CHNOLOGY WITH PYROLYSIS PROPERTY OF MUNICIPAL SOLID WASTES