Abstract:The deactivation reason of titanium–silicon zeolites in propylene epoxidation was investigated through characterizing fresh, deactivated, and regenerated TS‐1 zeolite catalysts. The blockage of partial pore channels and the coverage of partial active sites over TS‐1 by ethers and oligomers led to the catalyst deactivation. Titanium silicalite‐1 (TS‐1) serves as an effective catalyst for propylene epoxidation in the hydrogen peroxide propylene oxide (HPPO) process, attracting wide attention from researchers and industry. Nonetheless, the TS‐1 catalyst experienced inevitable deactivation during industrial applications, which adversely impacts its lifespan. To enhance reaction stability of catalyst, the present work conducted a systematic investigation into the deactivation reason of the TS‐1 catalyst. The fresh, deactivated, and regenerated catalysts were characterized by using various analytical techniques to compare their physicochemical properties. The surface coke species of the deactivated catalysts were extracted by the Soxhlet extraction method and subsequently analyzed using GC–MS. Additionally, the pathways for by‐product formation were simulated through Gauss software. The results indicated that the so‐called coking deposits formed during the reaction predominantly consist of propylene glycol, ethers, and oligomers. These coke species covered the partial active sites on the catalyst surface, blocked the pores of the catalyst, and accordingly led to the deactivation of the catalyst, although the crystalline structure of the catalyst hardly changed after deactivation. These results provide a theoretical basis and novel insights for the rational design and development of efficient catalysts for the HPPO process.

Deactivation of catalyst TS-1 in propene epoxidation

Effect of Propylene Glycol Monomethyl Ether and Rust Impurities on TS-1 Deactivation in Propylene Epoxidation

Deactivation and regeneration of TS-1/SiO2 catalyst for epoxidation of propylene with hydrogen peroxide in a fixed-bed reactor

Epoxidation of propylene to propylene oxide catalyzed by μ-oxo-bismetalloporphyrins

Characterization of Fresh, Deactivated, and Regenerated TS‐1 for Propylene Epoxidation: Investigating Surface Deactivation Species

Au/TS-1 Catalyst Prepared by Deposition–precipitation Method for Propene Epoxidation with H2/O2: Insights into the Effects of Slurry Aging Time and Si/Ti Molar Ratio

Au/uncalcined TS-1 Catalysts for Direct Propene Epoxidation with H2 and O2: Effects of Si/Ti Molar Ratio and Au Loading

The kinetics and reaction of propylene epoxidation over TS-1

Exploration research on high selectivity of propylene epoxidation over TS-1 catalyst

Effect of Solvents on Propylene Epoxidation over TS-1 Catalyst

Deactivation and Regeneration of Ti/Hms Catalyst Used in Propylene Epoxidation

Au Nanoparticles Deposited on the External Surfaces of Ts-1: Enhanced Stability and Activity for Direct Propylene Epoxidation with H-2 and O-2

Surface Engineering and Kinetics Behaviors of Au/Uncalcined TS-1 Catalysts for Propylene Epoxidation with H2 and O2

Study on catalytic oxidation activity of TS zeolite IV. Effect of TPABr on catalytic activity of TS-1 for epoxidation of propylene

Epoxidation of Propylene and Hydrogen Peroxide in a Lower Pressure Continuous Fixed-Bed Reactor

Characterization and Catalytic Performance of Ts-1 after Heat Treatment in Different Media

Epoxidation of Propylene with Dilute H 2 O 2 over Titanium Silicalite Containing Trace Aluminum

Effect of Ag addition on performance of Au/TS-1-B catalyst in gas phase propylene epoxidation

Towards highly stable and active Au / uncalcined TS-1 catalysts for direct propylene epoxidation with molecular H 2 and O 2 : Effect of Si / Ti molar ratio

Insight into the Effect of Mass Transfer Channels and Intrinsic Reactivity in Titanium Silicalite Catalyst for One-Step Epoxidation of Propylene

Effect on the introduction of hollow structure on Au/TS-1 to improve the stability for propylene epoxidation