Abstract:The large superconducting magnet are widely used and play an important role in nuclear fusion device, high-energy accelerator, space target infrared and other forefront fields. In this paper, we design several cryogenic centrifugal compressor stages for helium refrigerator with 3.3K-11K inlet temperature, used in exhausting the low-pressure and low-temperature saturated helium steam, further producing superfluid helium and cooling the large superconducting magnet. Due to the cryogenic compressor running environment and the internal structure, about 30W heat leakage from impeller hubs and the end of shafts into the flow passages are unavoidable, and it is necessary to consider this heat leakage in the centrifugal compressor impeller design. Firstly, adding the heat leakage into thermodynamic process and centrifugal compressor effective formula, then adjusting the inlet and outlet design parameters according to the heat transfer rate and make the preliminarily designs of each stage of the compressor. Four different methods for varying p design condition parameters are compared by CFD simulation. The 3-D impellers are designed by the Streamline Curvature Method, and the vaneless diffusers and volutes are designed by the inlet and outlet section aerodynamic parameters. When the best design method is determined, the blade profiles are further adjusted in order to improve the stage performance. Finally, the characteristic curves under variable working conditions and the generalized stage performance curves of each stage are calculated. In this paper, we delve into a high efficiency centrifugal compressor stage design method with the consideration of heat transfer effect. In the next step, more running data will be obtained after the further experiments and the long-term operation.

Research and development of centrifugal turbo cold compressor

Development for superfluid helium cryogenic system and application of turbo cold compressor

Research and development of Stirling cryogenic refrigerator

Development of a Cryogenic Performance Experiment System for Centrifugal Cold Compressors

STUDY ON A THERMOACOUSTICALLY DRIVEN PULSE TUBE REFRIGERATOR OPERATING AT 124K

Design Of Cryogenic Centrifugal Compressor Stages With Heat Transfer Considerations

Development and Experimental Study of a High-Efficiency Helium Twin-Screw Compressor

Experimental Study on a Floating Scroll-Type Compressor Driving a Precooled JT Cryocooler

Research on Performance of Refrigeration Centrifugal Compressor with Gas Bearings for Water Chillers

Numerical and Experimental Investigation on Refrigeration Centrifugal Compressor with Gas Bearings for Water Chillers

Characterization of an Embraco Oil-Free Linear Compressor for Driving JT Cryocoolers Working at Liquid Helium Temperature

Optimal design of a high-temperature superconducting magnetic bearing application in centrifugal turbo cold compressor

Design of A Valved Moving Magnet Type Linear Compressor for A Joule-Thomson Cryocooler

Status and Development Trends of Space Mechanical Refrigeration System at Liquid Helium Temperature

Determination of Critical Parameters in the EAST Subcooled Helium System

Research on Motor Cooling Process of Centrifugal Refrigeration Compressor with Gas Bearings

The Study Of A Small Air Refrigerator With Plate Foil Aerodynamic Bearings Turboexpander

Study on the Dynamic Performance of the Helium Turboexpander for EAST Subsystems

Present Status and One Upgrading Method with A Cold Compressor of the East Sub-Cooling Helium Cryogenic System

Experimental Investigation on a Closed-Cycle Single-Stage Turbo-Refrigerator for Deep Freezing

Operating and energy saving analysis of screw compressors for helium cryogenic system