Experimental study of treating formaldehyde exhaust by using chlorine dioxide oxidation

WANG Yan-yun,BI Xiao-yi,XU Xiao-yi

DOI: https://doi.org/10.3969/j.issn.1009-6094.2011.06.007

2011-01-01

Abstract:The article aims to search for a new method for purifying the formaldehyde exhaust in high concentration by using CIO_2.Our experimental research was done in a device of reaction column filling with porcelain ring,in which CIO_2 and HCHO are allowed to come into contact with each other.In so doing,we have mainly studied the removing efficiency of formaldehyde exhaust and the influence by formaldehyde concentration on the incoming air flow and CIO_2 concentration and that of CIO_2 fluid flow.The experimental results show that,with the increase of CIO_2 and formaldehyde concentration,the formaldehyde-removing efficiency lends to rise.However,with the increase,of the air flow,the removing rate tends to decrease.Nevertheless, with the increase of the import of CIO_2 fluid flow,little change would happen.Statistically speaking,when the concentration of CIO_2 increased from 5 mg/L to 100 mg/L,the removal rate would increase from 89.56%to 99.99%,with the formaldehyde concentration increase from 6.31 mg/L to 182.62 mg/L,the formaldehyde removing rate is likely to increase from 98.91%to 99.98%.However, when the air flow increased from 120 L/h to 280 L/h,the removing rate would remain steady in a range of 99.9%.Nevertheless, when the import of CIO_2 fluid flow rose from 1.45 mL/min to 9.60 mL/min,the removing rate tended to stabilize with no change at all with the fluctuations kept at 0.55%.When the formaldehyde concentration in range of 80 - 180 mg/L,the import air flow was 120 - 280 L/h and import liquid CIO_2 flow was 1 _3 mL/min,the concentration of CIO_2 was 40 mg/L,the removing efficiency could reach almost as high as 100%.Thus,the research has proved that the removing rate in high formaldehyde concentration would be better and feasible both from the point of view of theory and experiment.