Abstract:Biogas (BG) is an important renewable fuel from biomass feedstock with methane and carbon dioxide (CO2) as the main components. Its low fuel reactivity and flame stability caused by the considerable CO2 content raises the research need for the enhancement of its combustion. In this work, the laminar flame propagation of BG and DME mixtures was investigated with special attentions on the effects of DME co-firing, CO2 addition and pres-sure. The laminar burning velocities of BG/DME/air mixtures were measured at 298 K, varying initial pressures (1-10 atm), DME contents in fuel mixtures (0-1), CO2 contents in BG (0-0.4), and equivalence ratios (0.7-1.4). It was concluded that the laminar burning velocity can be effectively improved with the increasing DME content, moderately reduced with the increasing CO2 content, and dramatically reduced at elevated pressures. Mean-while, a kinetic model of BG/DME combustion was developed and validated against the experimental data in both this work and literature. The modeling analysis shows that the enhanced flame propagation with DME co-firing is associated with the increased concentrations of key radicals like H, O, and OH due to the increased adiabatic flame temperatures and the enhanced DME-related pathways. On the other hand, the inhibited flame propagation with CO2 addition is associated with the decreased concentrations of key radicals. The fictitious diluent gas method was used to separate the different effects of DME co-firing and CO2 addition. The thermal effects play a more important role than the chemical effects in the increased laminar burning velocity with the DME co-firing, while the contributions to the decreased laminar burning velocities with the CO2 addition obey the order of thermal effects > chemical effects > dilution effects. Moreover, the pressure effects in the laminar flame propagation of BG/DME mixtures reduce with the increasing DME content, but remain nearly unchanged with the increasing CO2 content. This is mainly because the DME co-firing can reduce the significance of the most important chain-termination pathway, i.e., CH4 (+M) = CH3 + H (+M), while the CO2 addition does not have adequate influence.

Study on Amount of Dissolved Gas in Different Pressures

Numerical Investigation of Diesel Spray Combustion Characteristics in the Ammonia/air Atmosphere

Study on the Effect of Diesel Fuel Containing Dissolved Gas on the Steady Spray and Atomization

The Effect of Gas Property on Atomization Features of Dissolved Gas Jet

Study of Droplet Size and Velocity of Fuel Containing CO 2 Spray by Means of PDA

Influence of injection of fuel containing dissolved gas (IFCDG) on the diesel combustion and emissions

A Numerical and Experimental Study on the Effects of CO2on Laminar Diffusion Methane/Air Flames

The effect of CO2 dissolved in a diesel fuel on the jet flame characteristics

Atomization Behavior of Fuel Containing Dissolved-Gas

An Experimental Study on Steady Spray Characteristics of Diesel Fuels Containing Dissolved CH4

Experimental and numerical research on the effects of pressure and CO2 dilution on soot formation in laminar co-flow methane/air diffusion flames

EXPERIMENTAL STUDY OF THE EFFECTS OF CARBON DIOXIDE CONCENTRATION IN DIESEL FUEL ON SPRAY CHARACTERISTICS

Gas Emissions and Particulate Matter of Non-Road Diesel Engine Fueled with F-T Diesel with EGR

Controlling Mechanism and Resulting Spray Characteristics of Injection of Fuel Containing Dissolved Gas

Experimental and Numerical Study of the Laminar Burning Velocity and Pollutant Emissions of the Mixture Gas of Methane and Carbon Dioxide

The Chemical and Physical Effect of Diluent H2O on NO and CO Emissions in Computational CH4 / Air Laminar Diffusion Flames

An optical study on the spray and combustion characteristics of coal-derived naphtha/diesel blends in a constant volume combustion chamber

Performance And Emissions Of Direct Injection Diesel Engine Fueled With Diesel Fuel Containing Dissolved Methane

Exploration on Laminar Flame Propagation of Biogas and DME Mixtures Up to 10 Atm: Insight into Effects of DME Co-Firing, CO2 Addition and Pressure

Study of Exhaust Gas Composition and Dilution Effects on Diesel Spray Ignition Characteristics

Comparative Study on the Effect of Co2 and H2o Dilution on Laminar Burning Characteristics of Co/H-2/Air Mixtures