Abstract:The bi-reforming of methane (BRM) is a promising process which converts greenhouse gases to syngas with a flexible H2/CO ratio. As there are many factors that affect this process, the coupled effects of multi-parameters on the BRM product are investigated based on Gibbs free energy minimization. Establishing a reliable model is the foundation of process optimization. When three input parameters are changed simultaneously, the resulting BRM products are used as the dataset to train three artificial neural network (ANN) models, which aim to establish the BRM prediction model. Finally, the trained ANN models are used to predict the BRM products when the conditions vary in and beyond the training range to test their performances. Results show that increasing temperature is beneficial to the conversion of CH4. When the molar flow of H2O is at a low level, the increase in CO2 can enhance the H2 generation. While it is more than 0.200 kmol/h, increasing the CO2 flowrate leads to the increase and then decrease in the H2 molar flow in the reforming products. When the numbers of hidden layer neurons in ANN models are set as (3, 3), (3, 6) and (6, 6), all the correlation coefficients of training, validation and test are higher than 0.995. When these ANN models are used to predict the BRM products, the variation range of the prediction error becomes narrower, and the standard deviation decreases with the increase in neuron number. This demonstrates that the ANN model with more neurons has a higher accuracy. The ANN model with neuron numbers of (6, 6) can be used to predict the BRM products even when the operating conditions are beyond the training ranges, demonstrating that this model has good extension performance. This work lays the foundation for an artificial intelligent model for the BRM process, and established ANN models can be further used to optimize the operating parameters in future work.

Simulation of Direct Coal Liquefaction in Batch Reactors by Artificial Neural Networks

Direct Prediction of Steam Cracking Products from Naphtha Bulk Properties: Application of the Two Sub-Networks ANN

Product Distributions of Benzene Alkylation with Propylene Estimation Using Artificial Neural Network (ANN)

Prediction of Product Distributions in Coal Devolatilization by an Artificial Neural Network Model

Prediction of Direct Coal Liquefaction Residue Catalytic Gasification Based on Back Propagation Neural Network

Prediction and Quantifying Parameter Importance in Simultaneous Anaerobic Sulfide and Nitrate Removal Process Using Artificial Neural Network

Artificial neural network model of co-gasification of petroleum coke with coal or biomass in bubbling fluidized bed

Predicting kinetic parameters for coal devolatilization by means of Artificial Neural Networks

Modeling and Control of Industrial Fischer^|^#8211;Tropsch Synthesis Slurry Reactor Using Artificial Neural Networks

Simulation of catalytic distillation using artificial neural network

Liquid fuel production from syngas: Simulation and optimization using artificial neural network

Simulation and Off-line Optimization of an Acrylonitrile Fluidized-bed Reactor Based on Artificial Neural Network

Artificial Neural Network Model for the Prediction of Methane Bi-Reforming Products Using CO2 and Steam

An ANN-based method for predicting Zhundong and other Chinese coal slagging potential

Artificial neural network based modelling approach for municipal solid waste gasification in a fluidized bed reactor

A Simple Coupled Anns-Rsm Approach In Modeling Product Distribution Of Fischer-Tropsch Synthesis Using A Microchannel Reactor With Ru-Promoted Co/Al2o3 Catalyst

Simulation of CO 2-Oil Minimum Miscibility Pressure ( MMP ) for CO 2 Enhanced Oil Recovery ( EOR ) Using Neural Networks

Prediction of Coal Slurry Concentration Based on Artificial Neural Networks

Direct Coupling of Microkinetic and Reactor Models Using Neural Networks

Lumped Kinetic Simulation of Hydrodenitrogenation for Full-Range Middle-Low Temperature Coal Tar

Artificial Neural Networks with Response Surface Methodology for Optimization of Selective CO2 Hydrogenation Using K-promoted Iron Catalyst in a Microchannel Reactor