Abstract:The biofouling characteristics of a sequential anoxic/aerobic-membrane bioreactor (A/O MBR) were analyzed during the three-stage process (fast-slow-fast transmembrane pressure (TMP) increasing). The results indicated: during the stage 1 (before day 1), the microbial communities in the activated sludge (AS), cake sludge (CS) and biofilm (BF) were similar to each other, and the adsorption of microbes and the metabolic products was the main factor that led to TMP increase; during the stage 2 (between day 1 and day 7), the cake layer begun to form and the TMP continued to rise gradually at a reduced rate compared to stage 1, at this point a characteristic microbial community colonized the CS with microorganisms such as Saprospiraceae and Comamonadaceae thriving on the membrane surface (BF) probably due to greater nutrient availability, and the predominance of these species in the microbial population led to the accumulation of biofouling metabolic products in the CS, which resulted in membrane fouling and the associated rise in TMP; during the final stage (after day 7), the biofilm had matured, and the activity of anaerobes stimulated cake compaction. The statistical analysis showed a correlation between the TMP changing rate and the carbonhydrates of soluble microbial products (SMPc) content in the CS. When the SMPc concentration rose slowly there was a low level of biofouling. However, when the SMPc accumulating rate was greater, it resulted in the more severe biofouling associated with the TMP jump. Furthermore, the correlation coefficient for the TMP increase and protein concentrations of extracellular polymeric substances (EPSp) in the CS was highly significant. The cluster analysis suggested that the AS microbial community remained stable during the three TMP change stages, while the CS and BF community were changed accompanied with the TMP change. The interaction between the microbial communities and the metabolic products lead to the significant correlation between them. The EPSp in conjunction with the SMPc were the main factors that accelerate the membrane fouling. The rapid rise of SMPc triggered a sudden increase in the TMP, while the accumulation of EPSp caused the sustained rise in TMP.

Linking Microbial Community Structure to Membrane Biofouling Associated with Varying Dissolved Oxygen Concentrations.

Insights into Membrane Fouling of Submerged Membrane Bioreactors by Characterizing Different Fouling Layers Formed on Membrane Surfaces

Role of EPS in Membrane Fouling of a Submerged Anaerobic-Anoxic-oxic (A-A-O) Membrane Bioreactor for Municipal Wastewater Treatment

Extracellular Polymeric Substances (EPS) Properties and Their Effects on Membrane Fouling in a Submerged Membrane Bioreactor

Membrane Fouling Related to Microbial Community and Extracellular Polymeric Substances at Different Temperatures

New insights to the difference in microbial composition and interspecies interactions between fouling layer and mixed liquor in a membrane bioreactor

Effective Control of Membrane Fouling by Filamentous Bacteria in a Submerged Membrane Bioreactor

Fouling Layer with Fractionated Extracellular Polymeric Substances of Activated Sludge

Influence of Filamentous Microbes on Dissolved Organic Matters and Membrane Fouling in Membrane Bioreactor(MBR)

Influence of Fluorescent Substances on Membrane Fouling in Membrane Bioreactors (MBR)

Dynamic Membrane Formation in Anaerobic Dynamic Membrane Bioreactors: Role of Extracellular Polymeric Substances

Correlation between membrane fouling and characteristics of sludge in a membrane bioreactor treating wastewater from supermarket

Study on membrane fouling of submerged membrane bioreactor in treating bathing wastewater.

Tracing biofouling to the structure of the microbial community and its metabolic products: a study of the three-stage MBR process

Membrane Fouling in a Submerged Membrane Bioreactor (MBR) under Sub-Critical Flux Operation : Membrane Foulant and Gel Layer Characterization

Correlating Membrane Fouling with Sludge Characteristics in Membrane Bioreactors: an Especial Interest in EPS and Sludge Morphology Analysis.

Deciphering the Core Fouling-Causing Microbiota in a Membrane Bioreactor: Low Abundance but Important Roles.

Linking Dynamics in Morphology, Components, and Microbial Communities of Biocakes to Fouling Evolution: A Comparative Study of Anaerobic and Aerobic Membrane Bioreactors

The relationship between microbial community structure and anaerobic MBR membrane fouling at a room temperature

Assessment of SMP Fouling by Foulant–membrane Interaction Energy Analysis

Sludge rheological and physiological characteristics in a pilot-scale submerged membrane bioreactor