Abstract:Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD). The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements (>10000 mg/kg, listed in decreasing order of abundance) in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements (1000 to 10000 mg/kg) include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L (Pb) and from 0.049 to 164.90 mg/L (Zn), mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkali content of CaO greatly contribute to leaching toxicity of heavy metal and acid neutralization capacity against acid rain.

Emission Character of Metal Elements in Inhalable Particulate Emitted from Several Waste Burning

THE CHARACTER OF PAHs IN PM10 EMITTED FROM DIFFERENT WASTE BURNING

Ultrafine Particle Formation in Pulverized Coal, Biomass, and Waste Combustion: Understanding the Relationship with Flame Synthesis Process

Particulate matter emission during MSW/RDF/WW combustion: Inorganic minerals distribution, transformation and agglomeration

Morphology, Composition, and Mixing State of Primary Particles from Combustion Sources — Crop Residue, Wood, and Solid Waste

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Emission Characterization of Particulate Matter in the Ironmaking Process

Characterization Of Pm10 In Shanghai During 2005: Individual Particles Analysis

Distribution of rare earth elements in PM10 emitted from burning coals and soil-mixed coal briquettes

Comparative Study on PM_(10) Microstructure and Heavy Metals Distribution in Emissions of Coal Combustion Sources

HEAVY METALS EMISSION FROM A FLUIDIZED-BED MSW INCINERATOR

Effects of fuel elemental composition and combustion temperature on PM 10 formation behaviors from combustion of municipal solid waste and refuse-derived fuel

Investigation of Basic Properties of Fly Ash from Urban Waste Incinerators in China.

Metallic elements and Pb isotopes in PM 2.5 in three Chinese typical megacities: spatial distribution and source apportionment.

Emission Characteristics Of Heavy Metals And Organic Pollutants From The Combustion Of Sewage Sludge

Levels and environmental impact of PAHs and trace element in fly ash from a miscellaneous solid waste by rotary kiln incinerator, China

MONTHLY VA IATIONS AND CHEMICAL COMPOSITIONS OF PM1 AND PM2.5 DURING THE HEATING PERIOD IN HARBIN, CHINA

Emission Behavior and Physicochemical Properties of Aerosol Particulate Matter (pm10/2.5) from Iron Ore Sintering Process

Characteristics and Sources of Elements of a PM10 Measurements from a Typical Industrial City in Eastern Hubei Province

Characteristics of Filterable and Condensable Particulate Matter Emitted from Two Waste Incineration Power Plants in China.

Fine Particle and Trace Element Emissions from an Anthracite Coal-Fired Power Plant Equipped with a Bag-House in China