Abstract:Two kinds of adsorbates—L-ascorbic acid and NaOH were used separately to investigate the effects of adsorbate distribution between ethanol bulk phase and the phase of water-rich layer adsorbed by the surface of SiO2 particles on the preparation of silver nanoparticles on SiO2 particles. When the adsorbate L-ascorbic acid was used, L-ascorbic distributes mainly in the ethanol bulk phase and thus the Ag particle generating reaction will take place in the ethanol bulk phase with the generated Ag particle size of about 18 nm. When the adsorbate NaOH was used, NaOH distributes mainly in the phase of water-rich layer adsorbed on the surface of SiO2 particles and thus the Ag particles generate in the water-rich adsorption layer with particle size of only about 5.4 nm. Since the NaOH concentration effects its distribution between the two phases of ethanol bulk phase and water-rich adsorption layer, the further experiments with changing NaOH concentration in the reaction system from 0.0170 to 0.404 g·L-1 were conducted. Results show that when concentration of NaOH in the system was increased from 0.0170 to 0.135 g·L-1, the NaOH concentration in the water-rich adsorption layer increases with the increase of NaOH concentration in the system gradually, which causes the generation of Ag grains gradually centralizes in the adsorption layer with the grain size decreases from 8 nm to 5 nm, and the Ag particles generated cover the SiO2 more uniformly. When NaOH concentration in the system was increased from 0.135 to 0.404 g·L-1, the amount of NaOH in the system is over the maximum NaOH capacity that can be contained in the water-rich adsorption layer and thus the NaOH concentration in ethanol bulk phase will increase to the limit, above which, the Ag generating reaction rate in it will accelerate more quickly than that in the water-rich adsorption layer, which causes the main generation zone of silver nanoparticles moves from water-rich adsorption layer to ethanol bulk phase gradually, and at the same time, the generated Ag grain size will increase from 5 nm to 12 nm.

Preparation and Stability of Oil-Based Silver Nanofluids

Preparation of Well-Dispersed Silver Nanoparticles for Oil-Based Nanofluids

Preparation and Stability of Silver/kerosene Nanofluids

Dispersion Stability of Tio2-H2o Nanofluids Containing Mixed Nanotubes and Nanosheets

Improved Dispersion Stability of Water-Based Tio2 Nanofluids Through Combined Effects of Nanoparticle Mixing and Dispersant Addition

Effect of Interphase Distribution of Reactants in Binary Liquids on Preparation of Silver Nanoparticles on Silica Particles

A Facile Synthetic Route to Aqueous Dispersions of Silver Nanoparticles

Stability and Thermal Conductivity Enhancement of Silver Nanofluids with Gemini Surfactants

Stability and thermal conductivities of hybrid sphere/tube TiO2 nanofluid

Preparation and Characterization of Stable Dispersive Colloidal Silver Nanoparticles

Preparation and thermal stability of oil-based Au nanofluids

Preparation and Properties of Copper-Oil-based Nanofluids

Preparation of Nonaqueous Silver Nanosuspensions by in Situ Dispersion of the Surface-Modified Nanoparticles

Preparation of Silver Nanoparticles in Water-in-Oil Emulsions

Stability evolution of ultrafine Ag nanoparticles prepared by laser ablation in liquids

Thermoresponsive Polymer-Stabilized Silver Nanoparticles

Preparation and Microstructure of Silver Nanopowder with Spheric Morphology

Stability Properties of Water-Based Gold and Silver Nanofluids Stabilized by Cationic Gemini Surfactants

Study on preparation, stability, thermal conductivity, and viscosity of silver nanoparticles-decorated three-dimensional graphene-like porous carbon hybrid nanofluids

Experimental Investigation on Preparation and Stability of Al2O3 Nanofluid In Deionized Water and Ethylene Glycol

Dispersion Stability Analysis of α-Fe2O3-Water-Based Nanofluid