Abstract:An efficient finite element analysis/computational fluid dynamics (FEA/CFD) thermal coupling technique has been developed and demonstrated. The thermal coupling is achieved by an iterative procedure between FEA and CFD calculations. Communication between FEA and CFD calculations ensures continuity of temperature and heat flux. In the procedure, the FEA simulation is treated as unsteady for a given transient cycle. To speed up the thermal coupling, steady CFD calculations are employed, considering that fluid flow time scales are much shorter than those for the solid heat conduction and therefore the influence of unsteadiness in fluid regions is negligible. To facilitate the thermal coupling, the procedure is designed to allow a set of CFD models to be defined at key time points/intervals in the transient cycle and to be invoked during the coupling process at specified time points. To further enhance computational efficiency, a “frozen flow” or “energy equation only” coupling option was also developed, where only the energy equation is solved, while the flow is frozen in CFD simulation during the thermal coupling process for specified time intervals. This option has proven very useful in practice, as the flow is found to be unaffected by the thermal boundary conditions over certain time intervals. The FEA solver employed is an in-house code, and the coupling has been implemented for two different CFD solvers: a commercial code and an in-house code. Test cases include an industrial low pressure (LP) turbine and a high pressure (HP) compressor, with CFD modeling of the LP turbine disk cavity and the HP compressor drive cone cavity flows, respectively. Good agreement of wall temperatures with the industrial rig test data was observed. It is shown that the coupled solutions can be obtained in sufficiently short turn-around times (typically within a week) for use in design.

Recent Engineering Applications in China on Coupling Boundary Elements With Finite Elements

Generalized bridging domain method for coupling finite elements with discrete elements

Mixed-dimensional finite element coupling for structural multi-scale simulation

Dynamic Sensitivity Analysis of Complex Structure Based on FEM

Application of FE‐BE‐IBE Coupling to Dynamic Interaction Between Alluvial Soil and Rock Canyons

Application of Boundary Element Method to Static Fluid-Solid Coupling Problems

A New Coupling Technique For The Combination Of Wavelet-Galerkin Method With Finite Element Method In Solids And Structures

ENHANCED FINITE ELEMENT ANALYSIS OF COMPOSITE BEAMS WITH INTERLAYER SLIPS

The coupling electromechanical enriched finite element method for statics characteristic of piezoelectric structures

An Adaptive Scaled Boundary Finite Element Method by Subdividing Subdomains for Elastodynamic Problems

A Coupling Model of Fe-Be-Ie-Ibe for Non-Linear Layered Soil-Structure Interactions

On the treatment of hydroelastic slamming by coupling boundary element method and modal superposition method

Composite Finite Elements on Dynamic and Buckling Responses of Composite Beams with Independent Rotations

A Coupling Finite-Discrete Element Method For Mechanical Analysis Of Granular Materials

Explicit Finite Element Formulations for the Free Vibrations and Buckling of Partial-Interaction Composite Beams with Two Sub-components

Efficient Finite Element Analysis/Computational Fluid Dynamics Thermal Coupling for Engineering Applications

Some advances in high-performance finite element methods

A Coupling Procedure of FE and SBFE for Soil–structure Interaction in the Time Domain

Some Recent Investigations on the Application of Boundary Element Methods

Finite/Explicit Finite Element - Finite Difference Coupling Method for Analysis of Soil - Foundation System

Coupled finite-discrete element modeling and potential applications in civil engineering