Abstract:This work describes the development and fabrication of a selective polymeric membrane electrode for iodide ion based on a metallophthalocyanin complex with a titanium(IV) atom at the center (as an oxo–titanium, Ti=O, group), phthalocyaninatotitanium(IV) oxide (PcTiO), as a sensing carrier. The potential response characteristics of the electrode were investigated by changing the type of plasticizer as well as the amounts of the carrier and different lipophilic ionic site additives in the sensing membrane. It is shown that the membrane electrode incorporated with 2-nitrophenyl octyl ether as the plasticizer and hexadecyl trimethylammonium bromide as the appropriate cationic additive exhibits enhanced potential response toward iodide over other anions tested. Over the period of this study, the resulting electrode based on PcTiO displayed a stable near-Nernstian slope approaching -58.9 mV decade −1 with a linear response spanning at least 5 orders of magnitude in concentration from 1.0 × 10 −1 to 9.2 × 10 −7 mol L −1 and a detection limit of 8.5–10 −7 mol L −1 . The preferential potential response to iodide may be attributed to the unique recognition of carrier PcTiO in the organic membrane phase for iodide in solution. Under laboratory conditions, the present electrode also works well in partially nonaqueous media. The excellent analytical features of the proposed electrode could lead to its successful application in determining the end point in electrometric titration of iodide with Ag + and the direct potential determination of iodide concentration in wastewater and drug preparations. Figure The UV-Vis spectra of phthalocyaninatotitanium(IV) oxide (PcTiO) in CHCI 3 before (dotted line) and after (solid line) treatment with NaI solution (pH 5.0). The preferential potential response of the PcTiO-based electrode to iodide may be attributed to the unique axial coordination between PcTiO and iodide

Fabrication of an iodide-selective electrode based on phthalocyaninatotitanium(IV) oxide and the selective determination of iodide in actual samples

Chitosan/Colloid Au Modified Gold Film Microelectrode For Iodide Determination

Fabrication of a Multilayer Film Electrode Containing Porphyrin and Its Application As a Potentiometric Sensor of Iodide Ion.

A pH Electrode Based on Melt-Oxidized Iridium Oxide

Potentiometric Iodide Selectivity of Polymer‐Membrane Sensors Based on Co(II) Triazole Derivative

Novel Attapulgite/Polyaniline/Phosphomolybdic Acid-Based Modified Electrode for the Electrochemical Determination of Iodate

In Situ Vapor Polymerization of Poly(3,4-ethylenedioxythiophene) Coated SnO2-Fe2O3 Continuous Electrospun Nanotubes for Rapid Detection of Iodide Ions

Preparation of iodide ion-selective electrode and its application on the detection of iodine content of phosphorous gypsum

Bis-dimethylaminobenzaldehyde Schiff-Base Cobalt(II) Complex as a Neutral Carrier for a Highly Selective Iodide Electrode

Protoporphyrin IX Based All-Solid-State Ion-Selective Electrodes for Choline Determination In Vitro

Electrochemical Determination of Iodide on a Vanadium Oxide–polypropylene Carbonate Coated Glassy Carbon Electrode

Fabrication of Visible-Light-active Fe-2MI Film Electrode for Simultaneous Removal of Cr(VI) and Phenol

Improved Sensing Membrane Immobilization for Enhanced Long-Term Stability of Iodide Ion-Selective Microelectrode

A Selective Membrane Electrode for Thiocyanate Ion Based on A Bis-Taurine-Salicylic Binuclear Copper(Ii) Complex As Ionophore

Fabrication of A Novel Lixmooy Film Modified Electrode and Its Application As an Electrochemical Sensor of Iodate

Two-dimensional Poly(3,4-Ethylenedioxythiophene) Nanosheets for Highly Electrochemical Detection of Iodide Ions

Lead Ion-Selective Electrodes Based on Polyphenylenediamine As Unique Solid Ionophores

A Highly Selective Nitrite Sensitive PVC Membrane Electrode Using Lipophilic Phthalocyanine Cobalt(III) Complex As the Carrier

Fabrication of a chemically modified electrode containing 12-molybdophosphoric acid by the sol–gel technique and its application as an amperometric detector for iodate

Highly Sensitive Colorimetric Sensor for Detection of Iodine Ions Using Carboxylated Chitosan–coated Palladium Nanozyme

Study on N,N'-bis(5-nitrosalicylidene)-2,6-pyridinediamine Nickel(ii) Complex As Carriers for the Preparation of Highly Selective Iodide Electrode