Abstract:This paper considers constraints on the cycle number of energy storage systems (ESSs), travel distances of switchable capacitors reactors (SCRs), on load tap changers (OLTCs) and step voltage regulators (SVRs). The characteristics and operational constraints of these equipments are properly formulated with binaries and big-M method, obtaining desirable linear descriptions. The branch flow equations of distribution systems for active and reactive power coordination are constructed. Considering physical constraints, a multi-period mixed-integer deterministic second-order conic programming (SOCP) to minimize network losses is formulated. Then, considering uncertainties of loads and active power of renewable distributed generators (DGs), a two-stage robust model is developed. A directly iteratively solving method between the first and second stage models is proposed. In contrast to the traditional column-and-constraint generation (CCG) method, increases to variables and constraints are not needed to solve the first stage model. To solve the second stage multi-period model, only the model of each single period needs to be solved first. Then their objective function values are accumulated, and the worst scenarios of each period are concatenated. As a result, the solving complexity is greatly reduced. The capabilities of the proposed method are validated by three simulation cases. It is found that the computational rate using the proposed method is significantly enhanced with much less computer storage. Specifically, the simulation results of 4, 33 and 69-bus systems indicate that the computing rate of the proposed method is about 28 times higher than CCG method when 8 iterations are performed. Meanwhile, the precision of optimization results is also improved.

A Large-scale Reactive Power Optimization Method Based on Gaussian Penalty Function with Discrete Control Variables

A Hybrid Reactive Power Optimization Algorithm Based on Improved Genetic Algorithm and Primal-dual Interior Point Algorithm

Optimization Method for Emergency Load Control of Receiving-end System Considering Coordination of Economy and Voltage Stability

Optimization Configuration of High Voltage Reactors in Large Power Grid

A coordinated control strategy for photovoltaic systems and controllable loads

Energy Consumption Oriented Reactive Power Optimization for Use in Large Scale Power Grid

The Application of Improvedga Algorithm in Reactive-Power Optimism

Reactive Power Optimizatin of Distribution Network Based on Primal-Dual Interior Point Method and Simplified Branch and Bound Method

A penalty approach for NIPM based optimal reactive power flow including discrete variables

Optimal Reactive Power Dispatch with Accurately Modeled Discrete Control Devices: A Successive Linear Approximation Approach

Reactive Power Optimization in Smart Grid with Wind Power Generator

A Decomposition and coordination algorithm for reactive power optimization in large-scale power systems

Multi-objective Optimization for Voltage and Frequency Control of Smart Grids Based on Controllable Loads

Optimal Reactive Power Dispatch Based on a Parallel Cooperative Particle Swarm Optimization Algorithm and PC-cluster

Reactive Power Optimization for Three-phase Distribution Networks with Distributed Generators Based on Mixed Integer Second-order Cone Programming

Penalty Electricity Price-Based Optimal Control for Distribution Networks

A Mixed Integer Second-order Cone Programming Based Active and Reactive Power Coordinated Multi-period Optimization for Active Distribution Network

Mixed-Integer Second-Order Cone Programing Model for Var Optimisation and Network Reconfiguration in Active Distribution Networks

Fast Solving Method for Two-Stage Multi-Period Robust Optimization of Active and Reactive Power Coordination in Active Distribution Networks

Decomposed optimization method over large-scale power system based on price response function

A Fully Distributed Reactive Power Optimization and Control Method for Active Distribution Networks