Abstract:Polyimide-block-poly(dimethyl siloxane) copolymer was synthesized by a two-step process, initiated by coupling anhydride terminated poly(amic acid), AT-PAA with amino terminated poly(dimethyl siloxane), (NH 2 ) 2 -PDMS to form poly(amic acid)-block-poly(dimethyl siloxane). The resulting copolymer is then thermally treated to produce polyimide-block-poly(dimethyl siloxane), PI-PDMS. Because of the high glass transition temperature, Tg of polyimide, it is usually cured at a high temperature of about 300°C for over 2.5 h. Copolymerization of polyimide with polysiloxane, reduces the imidization temperature while maintaining high thermomechanical properties. A series of instruments were used to monitor the progress of copolymerization. The time-based analysis of the product of copolymerization enables the optimization of the structure and properties of the copolymers. The chemical structure and composition of the copolymer were studied by Fourier Transform Infrared Spectroscopy, (FT-IR). The incorporation of PDMS blocks into the copolymer and the degree of imidization of the polyimide block increased with increasing reaction time. The change in the viscosity of the copolymerizing solution was monitored by simple shear viscometry conducted with the Brookfield Viscometer. The reported increase in solution viscosity with increasing copolymerization time is associated with increasing molecular weight of the copolymer. The intrinsic viscosity of the copolymer solution was measured as a function of copolymerization time and it was found that the intrinsic viscosity of the copolymer solution increased with increasing reaction time. The glass transition temperature (Tg) and the thermal stability of the copolymer were determined by differential scanning calorimetry, DSC and thermogravimetric analysis, and TGA, respectively. Between 25°C and 420°C, the copolymers synthesized in this study show two glass transition temperatures due to the polyimide, PI block at around 380°C and another peak associated with PDMS plasticized polyimide at about 290–300°C. The two Tg peaks observed in the DSC thermogram are believed to be indicative of the structure of a block copolymer. TGA analysis shows that the thermoxidative stability of the copolymers increased with increasing reaction time, due to the incorporation of increased amount of PDMS unit into the copolymer. The combination of increasing molecular weight of copolymer, higher degree of imidization of polyimide blocks and enhanced thermoxidative stability may translate into improved flame retardancy of copolymers. This suggested enhancement in flame retardancy in air atmosphere, is believed to be due the incorporated PDMS blocks, which can be converted into silica, SiO2, a recognized thermally stable material.

Synthesis of N-(4-Vinyl)Benzylimidazole Copolymer and Oxygen-Binding Properties of Its Complex with Cobaltporphyrin

Synthesis of Poly(vinylimidazole-Co-fluoropentyl Methacrylate) and Oxygen-Binding Properties of Its Complex with Cobaltporphyrin

Dissolution and Diffusion of Oxygen in and Through Poly(Octyl Methacrylate-Co-Vinylimidazole)/Cobaltporphyrin Complexed Membranes

Synthesis of Poly(3,4-Azopyridylene) and Oxygen-Binding Affinity of Its Complex with Cobaltporphyrin

Mono- and Dinuclear Cobalt Complexes with Chelating or Bridging Bidentate P,N Phosphino- and Phosphinito-Oxazoline Ligands: Synthesis, Structures and Catalytic Ethylene Oligomerisation.

IRREVERSIBLE OXIDATION OF PORPHYRINATO COBALT(II)(TPPCo) AND THE EFFECT OF FLUORINE-CONTAINING POLYMERS ON THE LIFETIME OF TPPCo COMPLEX MEMBRANES.

Bis(1H-imidazole-&#954;N3)bis(2-oxidopyridinium-3-carboxylato-&#954;2O2,O3)cobalt(II)

Fe(acac)n and Co(acac)n bearing different bis(imino)pyridine ligands for ethylene polymerization and oligomerization

Effect of A Fluoro-Coating on Oxygen Transport Performance and Lifetime of A Polymer-Cobaltporphyrin Membrane

EFFECT OF THE POLYETHYLENEIMINE-COBALT COMPLEX ON REDUCTION CURRENT OF OXYGEN

High Oxygen Permeation and Persistent Oxygen-Carrying in a Poly(vinylimidazole-co-fluoroalkyl Methacrylate)-Cobaltporphyrin Membrane

Synthesis, DNA Photocleavage and Singlet Oxygen Measurement of Cationic Bisporphyrins

Synthesis, Singlet Oxygen Generation and DNA Photocleavage of Β,β′-Conjugated Polycationic Porphyrins

Facilitated Oxygen Transport Membranes of Picket-fence Cobaltporphyrin Complexed with Various Polymer Matrixes

Ionothermal Synthesis, Crystal Structure and Photocatalytic Property of A New Cobalt Coordination Polymer

Grafted Polybenzimidazole Copolymers Bearing Polyhedral Oligosilsesquioxane Pendant Moieties

Synthesis and electrophotographic properties of copolyimides containing tetraphenylporphyrin

Study of six coordinated cobalt(III) oxophlorin with different axial ligands: Optimization of geometry and determining of energy and electronic configuration at various spin states by employing of B3LYP, BV86P and M06-2X methods

Spectroscopic Characterization of the Complexes of 2-(2′-Pyridyl)-Benzimidazole and (H 2 O) 1,2 , (CH 3 OH) 1,2 , and (NH 3 ) 1,2 Isolated in the Gas Phase

Spectroscopic Characterization of the Complexes of 2-(2′-Pyridyl)-Benzimidazole and (H2O)1,2, (CH3OH)1,2, and (NH3)1,2 Isolated in the Gas Phase

Novel Polyimide-block-poly(dimethyl siloxane) copolymers: Effect of time on the synthesis and thermal properties