Abstract:As a type of hydraulic rotary actuator, a helical hydraulic rotary actuator exhibits a large angle, high torque, and compact structure; hence, it has been widely used in various fields. However, its core technology is proprietary to several companies and thus has not been disclosed. Furthermore, the relevant reports are primarily limited to the component level. The dynamic characteristics of the output when a helical rotary actuator is applied to a closed-loop system are investigated from the perspective of driving system design. Two main aspects are considered: one is to establish a reliable mathematical model and the other is to consider the effect of system parameter perturbation on the output. In this study, a detailed mechanical analysis of a helical rotary hydraulic cylinder is first performed, factors such as friction and load are considered, and an accurate dynamic model of the actuator is established. Subsequently, considering the nonlinear characteristics of pressure flow and the dynamic characteristics of the valve, a dynamic model of a valve-controlled helical rotary actuator angle closed-loop system is described based on sixth-order nonlinear state equations, which has never been reported previously. After deriving the system model, a sensitivity analysis of 23 main parameters in the model with a perturbation of 10% is performed under nine operating conditions. Finally, the system dynamics model and sensitivity analysis results are verified via a prototype experiment and co-simulation, which demonstrate the reliability of the theoretical results obtained in this study. The results provide an accurate mathematical model and analysis basis for the structural optimization or control compensation of similar systems.

Influence of Pressure Exponent on Thrust Control of SRM

Characteristic Analysis on Thrust Pressure Control of Shield Boring Machine

A Novel Control Strategy of Gripper and Thrust System of TBM Based on Model Analysis

Research on Permanent Magnet linear Synchronous Motors Driver for Micro-fabrication

Coordinated control of gripper and thrust system for single gripping TBM

Modeling and characteristics investigation on a new pneumatic proportional pressure valve

Pressure and speed control of electro-hydraulic drive for shield tunneling machine

Thrust Ripple Optimization and Experiment for a Permanent Magnet Linear Synchronous Motor

Modeling and dynamic characteristics analysis on solid attitude control motor using pintle thrusters

Comparison Of Solid Rocket Motor Thrust Modulation Technique

Research on direct-thrust-control of permanent magnet linear synchronous motor

Influence of Structural Parameters on the Performance of Vortex Valve Variable-Thrust Solid Rocket Motor

THRUST RIPPLE OPTIMIZATION AND EXPERIMENT FOR PMLSM

Performance Comparison of Control Strategies for a Variable-Thrust Solid-Propellant Rocket Motor

Modeling and Parameter Sensitivity Analysis of Valve-controlled Helical Hydraulic Rotary Actuator System

Thrust Control Method and Technology of Variable-Thrust Liquid Engine for Reusable Launch Rocket

Thrust Optimization and Thermal Analysis of a Water-Cooled Double-Sided Permanent Magnet Linear Synchronous Motor

Model Linearization and Stability Analysis of Thruster System Controlled by Proportional Pressure Reducing Valves

Pressure oscillation and suppression method of large-aspect-ratio solid rocket motors

Variations and Control of Thrust and Mixture Ratio in Hybrid Rocket Motors

Multi-objective Optimization Design of a Double-Sided Linear Switched Reluctance Motor Using Response Surface Method