Design and Realization of Voice Alarm System Based of ARM Microprocessor

WANG Yong-hong,ZHANG Li-li,DAI Xue-feng,LIU Shu-dong

DOI: https://doi.org/10.3969/j.issn.1007-984x.2007.01.033

2007-01-01

Abstract:The paper presents the principle and realization of voice alarm composed of EX44B0 board integrating ARM microprocessor and the voice chip ZY1420A.The advantages of this system are quick response,clean alarm,high credibility and simple circuit,etc.

What problem does this paper attempt to address?

Remote Monitoring and Alarm System based on ARM9

HAN Dong-xu,QIN Wen-hua,ZHAO Jian-ping,LI Xiao-li,ZHOU Zi-li

DOI: https://doi.org/10.3969/j.issn.1002-0802.2013.10.021

2013-01-01

Abstract:The remote monitoring and alarm system based on ARM9 forsending alarm images in real time is proposed and designed.With Linux as software platform and mini2440 board as hardware platform,this system acquires photos by cameras,and monitors the screen with LCD real-time display.If any change of the monitoring area is found within the set time,the alarm image would be sent through GSM communication module.The existing monitoring system is relatively complex and only suitable for large-scale applications,the proposed system is more applicable to small occasions.The user may pick up the alarm image with mobile phone,thus saving the cost and extending the application scope.
Design of an Intelligent Alarm System Based on 80C51

LI Hao-ran,CHEN Xiao-yu,LIU Yu-ling,WANG Xiao-ping

DOI: https://doi.org/10.3969/j.issn.1673-629x.2012.05.060

2012-01-01

Abstract:The safety of househood is the key part of personal and property safety.As the increased case of housebreaking and robbery,the demand of a cheap,simple house alarm system with small disturbance is rising day by day.It introduces an alarm system based on the 80C51 microcontroller,describing its composition and software/hardware design.This system integrates situation identification,voice warning,on-site and remote alarming with relatively low cost,guaranteeing a friendly man-machine-environment by providing both guests and the house owner with necessary instructions.It supports operations including system activation/deactivation,time setting,password setting,alarming phone numbers setting,alarming time and phone number recording and checking.When activated,it would simultaneously ring the alarm and dial the stored numbers to inform the owner or the police of the potential housebreaking.The system designed here will be base of the practicle alarm system in the future.
Design of multi-functional portable electronic experimental box based on Labview and ARM

Jiang Junmin,Hao Ziyi,Lan Fan,Yao Yingying

DOI: https://doi.org/10.3969/j.issn.1672-1438.2011.07.022

2011-01-01

Abstract:The multi-functional portable electronic experimental box is based on ARM7 LPC2148 32-bit microcontroller,integrating DDS digital phase synthesis signal generator AD9850,cooperating with computer's communication system and the sound card's signal collection system,and making use of a computer host process developed by Labview.After data collection,computer programs process and display the data to work as a virtual oscilloscope.The whole system and the circuit boards equipped with the common devices are placed in a small box,providing portable test environment.It brings convenience to the basic electronic experimental class presentation and students' independent experiments and has brought about a innovaton model of interactive practice in the teaching of electronic technology courses.
Research and design based on single chip wireless burglar alarm

WANG Zhi-gang,LI Wei,JIA Yu-fei

DOI: https://doi.org/10.3969/j.issn.1674-6236.2015.20.040

2015-01-01

Abstract:The alarm has a low rate of false positives, easy installation and configuration, low cost, less energy consumption, use very convenient. Induction is the principle of vibration signals, convert them to ultra-low frequency signal, after amplification circuit, output. Detector is the use of vibration sensor SW-18015-p, once has the vibration signal to the host. The host function is through radio signals, then through single chip, then the digital tube display out the specific scope of the signal and at the same time issued a warning sound control horn. Can be applied to household anti-theft, warehouse and wait for a variety of security situation, has the very strong practical value and good market prospects.
Design of an Infrared Alarm System

Liu Yang

2013-01-01

Abstract:According to the advantages of infrared,such as high concealment,confidential,usable day and night,and strong anti-interference ability,etc.,a kind of infrared alarm system is designed.This system consists of two parts: son alarm system and father alarm system.Passive infrared sensor and single-chip microcomputer and Microsoft Visual Studio 2008 are selected to realize all the functions of the system,and test and inspection are completed.The signal is detected by pyroelectric infrared sensor and amplified to enter into the single-chip as inputs.The voice and alarm,flashing lights,wireless transmission,serial communication are controlled by single-chip.In the end,receive and alarm are realized by the alarm system software in the computer.The purpose of offsite dual alarm is achieved.
Design of Short-range Electronic Alarm Based on RFID

Wang Yong,Zhao Junyi

DOI: https://doi.org/10.3969/j.issn.1672-9722.2008.06.041

2008-01-01

Abstract:Presents a short-range electronic alarm design;the system consists of two components: receiving part and launch part.The launch part constituted by the microprocessor component ET44M210 and transmission module ET13X340A.The receive part constituted by the microprocessor component ET44M210 and receiving module ET13X330A.A reader can be monitored on a number of tags,when the tag from reader over a certain distance,reader alarm.
Research of Embedded Sound Identification System Based on ARM

WEI Jun-feng,ZHANG Yong-de,GAO An-bang

DOI: https://doi.org/10.3969/j.issn.1002-2333.2007.09.038

2007-01-01

Abstract:A sound identification subsystem based on ARM Micro Controller, was designed for embedded systems. This sound identification subsystem, taking ARM processor and UDA1341 as its core, can accomplish sound identification independently by collaborating with some other function circuits. ARM chip as the system control chip and the upper computer is responsible for setting up the HMM of sound signal, thus make the embedded sound identification system more convenient and simpler. The subsystem is also generalizable and cuttable. The result indicates that the design of this system is practical and advantageous in the sound identification and high degree of accuracy.
Vibration Type Wireless Alarm System Design and Production

Yin qun,Mao xiao,Zhang jianbo,Yin Meisu

DOI: https://doi.org/10.1109/itaic49862.2020.9338783

2020-12-11

Abstract:In this paper, using single-chip microcomputer control technology and wireless communication technology, design a wireless alarm system.This software system to complete the software design using C language. Hardware environment consists of two experimental board, one is sending board, a receiving plate.This software system to complete the software design using C language. Hardware environment consists of two experimental board, one is sending board, a receiving plate.This software system to complete the software design using C language. Hardware environment consists of two experimental board, one is sending board, a receiving plate.Can realize accurate indoors has no one to send alert information, greatly improve the timeliness and stability of the alarm message, for family property safety provides a more reliable guarantee.
A Design of Acousto-Optic Voice Linkage Alarm System

SUN Yancheng,WANG Yafei,ZHOU Ying,WANG Ran,LI Ying

DOI: https://doi.org/10.3969/j.issn.1005-9490.2011.05.028

2011-01-01

Abstract:An alarm system of acousto-optic voice on master station and extended station is designed by PIC16F877A chips,and that system is stable and reliable,safe and encrypted.The master station can be connected to communicate with 20 extended stations,which are differentiated with each other by the dialing-up of a dial switch,and 6 kinds of alarm types are supported by every extended station.The 485 communication mode is adopted between master station and extended station,and the optical transmitter and receiver are used to transmit alarm signal between master station and every pair of extended stations,of which the transmit distance can reach 200 kilometer.
Design of passive infrared alarm system PIC single chip microcomputer

Yang Bo,Zhang Xinggan

DOI: https://doi.org/10.3969/j.issn.1002-7300.2008.01.017

2008-01-01

Abstract:A passive infrared alarm system based on the technologies of PIC single chip microcomputer,radio transceiver and pyroelectric infrared sensor is introduced.Hardware designs and operation principle are presented.This alarm system has both switch and telecontrol,and can work on the mode of scene alarm and wireless alarm.Hardware frame,software flowchart of the system and new designs to deduce the power loss are demonstrated.The specialities are low power,compact and cheap cost,and practical tests prove its convenience and reliability.
The Design and Realization of Portable Temperature and Humidity Alarm

Xu Baihui,Zhao Jinghong,Qu Hao,Qu Shaocheng

DOI: https://doi.org/10.3969/j.issn.1673-9833.2008.05.016

2008-01-01

Abstract:A portable temperature and humidity alarm detector device based on the AT89C2051 microcontroller is designed and realized.Firstly,the composition and working principle of the entire system are introduced,and then temperature detecting circuit,humidity measuring circuit and power detecting circuit are also provided.This system has function of automation detection,value displaying on LED in real time and transfinite alarming in high sound intensity.
Design of On-Board Remote Alarm System Based on GSM Network

MENG Na,WANG Shuai,CHEN Wen-qiang,PAN Zhi-jie,ZHAO Fu-quan

DOI: https://doi.org/10.13273/j.cnki.qcdq.2011.12.003

2011-01-01

Abstract:The on-board remote alarm system is designed based on the GSM technology.With a MCU as its control core,this system uses the alarm signal of a sensor to make the GSM module send messages to the appointed number at the same time when it alarms.It can control the other body units through CAN bus,thus effectively improving the anti-theft performance of automobile.
Design of Home Intelligent Alarm and Control System Based on GSM Short Message

ZHONG Yufang,LV Anping,WU Mingguang

DOI: https://doi.org/10.3969/j.issn.1001-5531.2008.06.005

2008-01-01

Abstract:Based on GSM short message,an intelligent alarm and remote control system which made the high performance microcontroller ATmega64 as the core was presented.From several aspects,such as system structure,working principle,hardware and software design,the intelligent alarm and remote control system was narrated.The system could be connected to the various wired or wireless sensors to achieve the home security alarm and remote control by the short message.
Design of fire security alarm system based on GSM and single chip microcomputer

Feng Yan

Abstract:Introduced a system which can prevent the theft and fire based on the Single chip microcomputer and GSM module,and the basic working principle and composition of the circuit are detailed described. The system used the active infrared sensors and a smoke sensor for testing, Can be achieved when someone invasion, or when there are smoke there is fire.This system can be Audible and visual alarm,and use Chinese SMS to send the specific situation to your phone screen,make sure your family is safe. This system is a high degree of automation, adaptable and reliable circuit design, so general families can accept.

Engineering,Computer Science
Design and implementation of the alarm system based on AVR microcontroller

He REN,Xin LU

DOI: https://doi.org/10.3969/j.issn.1674-6236.2018.11.039

2018-01-01

Abstract:The alarm system is designed based on AVR microcontroller. This system consists of angular displacing detection,an anti-misinforming,and send warning message to the owner's mobile phone. By collect angle detected unit,to find the goods id taken off by others. With the help of the anti-misinforming algorithms,the system can avoid the falsity alarm because of smoothful displacement or small vibration. But the system will alarm and send warning message to the owner's mobile phone once there does exist theft. And the user can chose Bluetooth or WIFI module by personal love. This system has smaller cubage,lower power,and little fare. And it is easily fixed.
Design of Intelligent Mobile Early Warning Network Device

Hu Sheng,Li Ming,Yang Lei

DOI: https://doi.org/10.3969/j.issn.1671-4598.2013.03.073

2013-01-01

Abstract:A sort of intelligence mobile alarm network device was designed.The device integrated the mobile communications and alarm functions.Working principle of device was analyzed and the master device and the slave device were designed.This paper mainly introduced the design of reset model,the design of real time clock module,the design of alarm module,the design of PWM module and power supply module based on Nios II and so on.Experiments showed that this system had advantages of 2M bps transmission rate,50 meter alarm distance between the master device and the slave device,low transmit power and high reliability.It possessed high application value and promoting value.
The Design of Fire Alarm System Based on Microcontroller ATmega16L

Yang Le

Abstract:The system is controlled by microcontroller ATmega16,while the temperature sensor DS18B20 and gas sensors 2M007 receive fire signal.Through the intelligent processing,sound and light alarm is sent out in the form of pulse dialing,thus,danger message is transmitted by the telephone line got through by a pre-set the phone number so as to give a multiple-alarm warning.

Computer Science,Engineering
Design and implementation of the full wireless video alarm system

Qian Zhong,Rui-fang MA,Ya-nan SONG,Jian-yong WANG

2005-01-01

Journal of Computer Applications

Abstract:This paper introduced a novel solution of a embedded alarm system based on the wireless video technology. This system integrated the advanced network technology, the wireless communication technology and the multimedia technology. It could send the real-time pictures collected by the video surveillance system to the user’s mobile telephone or email box,so the user could easily know the status of the locale.
Design of CO monitoring and alarm system based on MQ-2 and GSM

ZHENG Dao-lin,SUN Yao-jie,ZUO Zhao-hui

DOI: https://doi.org/10.3969/j.issn.1674-6236.2014.04.048

2014-01-01

Abstract:Developed a CO monitoring and alarm systems with the function of SMS. The system uses a combination of singlechip of stc89c52 and MQ-2 sensor monitoring the multi-channel CO.CO concentration is displayed in real time. When the concentration values exceed the threshold, local sound and light will alarm, and GSM module send alarm SMS to the specified phone. CO alarm threshold and phone numbers can be set through the keys. The system has a simple operation, high accuracy, sensitivity, and good control of costs in favor of promotion, meet the design requirements.
Design of ARM-based Remote Control System

Yan Chen,Wei Ye

DOI: https://doi.org/10.3969/j.issn.1000-0380.2005.11.002

2005-01-01

Abstract:In this paper,the design of a remote control system based on ARM is introduced. The POCSAG encoded control command is received by pager network,and the feedback data is encoded in DTMF by using DTMF signal generator and transmitted through public telephone network,thus a wholly functioned remote control system is implemented to overcome the disadvantages of previous remote control systems.

Design and Realization of Voice Alarm System Based of ARM Microprocessor

Remote Monitoring and Alarm System based on ARM9

Design of an Intelligent Alarm System Based on 80C51

Design of multi-functional portable electronic experimental box based on Labview and ARM

Research and design based on single chip wireless burglar alarm

Design of an Infrared Alarm System

Design of Short-range Electronic Alarm Based on RFID

Research of Embedded Sound Identification System Based on ARM

Vibration Type Wireless Alarm System Design and Production

A Design of Acousto-Optic Voice Linkage Alarm System

Design of passive infrared alarm system PIC single chip microcomputer

The Design and Realization of Portable Temperature and Humidity Alarm

Design of On-Board Remote Alarm System Based on GSM Network

Design of Home Intelligent Alarm and Control System Based on GSM Short Message

Design of fire security alarm system based on GSM and single chip microcomputer

Design and implementation of the alarm system based on AVR microcontroller

Design of Intelligent Mobile Early Warning Network Device

The Design of Fire Alarm System Based on Microcontroller ATmega16L

Design and implementation of the full wireless video alarm system

Design of CO monitoring and alarm system based on MQ-2 and GSM

Design of ARM-based Remote Control System