UV Curing Behaviors and Hydrophilic Characteristics of UV Curable Waterborne Hyperbranched Aliphatic Polyesters

A Asif,CY Huang,WF Shi

DOI: https://doi.org/10.1002/pat.380

IF: 3.348

2003-01-01

Polymers for Advanced Technologies

Abstract:A series of waterborne hyperbranched polyesters (WBHPs) endcapped with methacrylic and salt-like groups in different ratios have been investigated as UV curable resins. The kinetic studies of the drying step and UV curing were carried out by FT-IR measurements. The drying of the film of 100 pm thickness was completed in less than 6 hr at 70degreesC or within 10 hr at 50degreesC in an oven. The influence of different photoinitiators and their concentrations, extent of unsaturation and acid content of WBHP on final unsaturation conversion was studied. The surface free energy is a critical character, which affects the surface properties of a cured film. So one method based on the measurement of contact angle of a pure liquid on a solid surface was applied to determine the polar and dispersive components of the surface energy of UV cured films. The investigations of surface energy of WBHPs illustrated that those with more acid content and thus higher polar component are more sensitive to water, while those containing less acid content and thus lower polar term are less water sensitive. Moreover, the UV cured films of WBHPs and their blends with commercial waterborne resins (trade name EB 210, EB 2002, EB 11 and IRR 160) have acceptable pendulum hardness varying from 55 to 180 sec. Copyright (C) 2003 John Wiley Sons, Ltd.