Abstract:Adsorption kinetics and conformation of sodium oleate and carboxymethylcellulose (CMC) on the quartz surface in real time remain a challenge in the flotation system of CMC /sodium oleate/quartz. In this work, in situ adsorption characteristics of CMC and sodium oleate on quartz surface was investigated by using quartz surface crystal microbalance with dissipation (QCM-D). QCM-D data showed that the conformations and kinetics were critically dependent on pH and degree of substitution (DS) of CMC. As the degree of substitution of CMC increases, the adsorption layer on the quartz surface becomes looser. There was only one adsorption stage at pH 8 and 12, and the adsorption layer was rigid at pH 12. At pH= 10, the conformation of the adsorbed layer changes from loose to rigid and then to loose again. CMC adsorbs less in the early adsorption stage, and the adsorbed layer is loose. As the adsorption proceeds, the adsorption increases, and the adsorbed layer becomes more rigid. At stage III, the adsorbed layer becomes loose, which is considered to be the formation of a hydrated layer. Under different pH conditions, the adsorption of sodium oleate on the quartz surface had only one stage, and when CMC and sodium oleate were adsorbed one after the other on the surface of the quartz surface, two distinguishable adsorption stages appeared, and the conformation of the adsorbed layer gradually changed from rigid to loose. The change of surface free energy of quartz surface before and after CMC adsorption was also calculated by Washburn kinetic equation and the van Oss - Chaudhuri-Good theory. The results showed that the surface free energy reduced and the hydrophobicity increased after the adsorption of CMC on the quartz surface.

IN SITU MONITOR THE ADSORPTION OF POLYELECTROLYTE BY A PIEZOELECTRIC SENSOR

Monitor of Interaction Between Nanoparticles and Polyelectrolyte by Piezoelectric Sensor

Polyaniline–TiO2 Nano-Composite-based Trimethylamine QCM Sensor and Its Thermal Behavior Studies

Online Ph Monitoring Based On A Wireless Electrodeless Quartz Crystal Microbalance With Dissipation

Study of Cationic Polyelectrolyte Adsorption Onto Quartz Surface Using an Electrode-Separated Piezoelectric Sensor

In Situ Monitoring of Lysozyme Adsorption Onto Bare and Cysteine- or 1-Octadecanethiol-modified Au Electrodes Using an Electrochemical Quartz-Crystal Impedance System

An Electrode-Separated Piezoelectric Sensor As A Surface Monitoring Technique for Anionic Surfactant Adsorption on Quartz Surface

In Situ Adsorption Study of Carboxymethylcellulose and Sodium Oleate on Quartz Using a Quartz Crystal Microbalance with Dissipation (QCM-D)

Determination of Surfactant Adsorbed on a Quartz Surface by an Electrode-separated Piezoelectric Sensor

Combined Quartz Crystal Impedance and Electrochemical Impedance Measurements During Adsorption of Bovine Serum Albumin Onto Bare and Cysteine- or Thiophenol-Modified Gold Electrodes

Adsorption Studies of Cationic Starch Onto Quartz Surface Through an Electrode-Separated Piezoelectric Sensor

Combination of an Electrodeless Quartz Crystal Microbalance and Spectrometric Methods and Application in Monitoring Adsorption Kinetics of Iodine on Metal-Organic Frameworks Films

In situ investigation of lysozyme adsorption into polyelectrolyte brushes by quartz crystal microbalance with dissipation

Piezoelectric sensing monitor of surface adsorption characteristic of protein on silane film

In-situ evaluation of dye adsorption on TiO2 using QCM

A Simultaneous Electrochemical Impedance and Quartz Crystal Microbalance Study on Antihuman Immunoglobulin G Adsorption and Human Immunoglobulin G Reaction

In Situ Kinetics and Conformation Studies of Dodecylamine Adsorption Onto Zinc Sulfide Using a Quartz Crystal Microbalance with Dissipation (QCM-D)

Oscillation frequency characteristic of an electrode-separated piezoelectric sensor and application to the determination of the adsorption of a surfactant on a quartz surface

In Situ Monitoring of the Generation of Monodisperse Silica Particles During the Hydrolysis of Tetraethyl Orthosilicate with Piezoelectric Quartz Crystal Impedance Analyzer

A Study of Sodium Oleate Adsorption on Ca2+ Activated Quartz Surface Using Quartz Crystal Microbalance with Dissipation

Simultaneous EQCM and Diffuse Reflectance UV–visible Spectroelectrochemical Measurements: Poly(aniline-Co-o-anthranilic Acid) Growth and Property Characterization