Abstract:A significant fraction of the total power in highly synchronous systems is dissipated over clock networks. Hence, low-power clocking schemes are promising approaches for low-power design. We propose four novel energy recovery clocked flip-flops that enable energy recovery from the clock network, resulting in significant energy savings. The proposed flip-flops operate with a single-phase sinusoidal clock, which can be generated with high efficiency. In the TSMC 0.25-$\mu$m CMOS technology, we implemented 1024 proposed energy recovery clocked flip-flops through an H-tree clock network driven by a resonant clock-generator to generate a sinusoidal clock. Simulation results show a power reduction of 90% on the clock-tree and total power savings of up to 83% as compared to the same implementation using the conventional square-wave clocking scheme and flip-flops. Using a sinusoidal clock signal for energy recovery prevents application of existing clock gating solutions. In this paper, we also propose clock gating solutions for energy recovery clocking. Applying our clock gating to the energy recovery clocked flip-flops reduces their power by more than 1000× in the idle mode with negligible power and delay overhead in the active mode. Finally, a test chip containing two pipelined multipliers one designed with conventional square wave clocked flip-flops and the other one with the proposed energy recovery clocked flip-flops is fabricated and measured. Based on measurement results, the energy recovery clocking scheme and flip-flops show a power reduction of 71% on the clock-tree and 39% on flip-flops, resulting in an overall power savings of 25% for the multiplier chip.

Instruction-driven clock scheduling with glitch mitigation.

Noise-aware DVFS Transition Sequence Optimization for Battery-Powered IoT Devices.

Power Gating Aware Task Scheduling in MPSoC

Efficient Instruction Scheduling Using Real-time Load Delay Tracking

An Energy-Efficient Instruction Scheduler Design with Two-Level Shelving and Adaptive Banking

Improve Clock Gating Through Power-Optimal Enable Function Selection.

Power-gating-aware Scheduling with Effective Hardware Resources Optimization.

Design of a Low Power DSP with Distributed and Early Clock Gating

Design of Flip-Flops with Clock-Gating and Pull-Up Control Scheme for Power-Constrained and Speed-Insensitive Applications.

Low Power Gated Clock Tree Driven Placement

LECTOR Based Clock Gating for Low Power Multi-Stage Flip Flop Applications

Timing-aware Clock Gating of Pulsed-Latch Circuits for Low Power Design.

Data-Dependent Clock Gating approach for Low Power Sequential System

A Fast Incremental Clock Skew Scheduling Algorithm for Slack Optimization

Power reduction through specific instruction scheduling based on hardware/software Co-design

A Multi-Frequency Based Methodology for Microprocessor Design

A novel dynamic scheduling algorithm of data hazard for embedded processor

Efficient Clock Skew Scheduling and Delay Extraction for Slack Optimization

Micro-architecture Pipelining Optimization with Throughput-Aware Floorplanning.

Ultra Low-Power Clocking Scheme Using Energy Recovery and Clock Gating

Timing Yield Driven Clock Skew Scheduling Considering Non-Gaussian Distributions of Critical Path Delays