Abstract:The high temperature compressive characteristics of relatively light weight AlCoCrFeNi HEA were investigated via compression tests in a wide deformation temperature (T) range of 1073–1373 K and strain rate (ε˙) range of 10−3–1 s−1. Hot deformation led to the phase constitution transformation from the disorder BCC (A2) + order BCC (B2) at the room temperature to FCC + A2+ B2 +σ at 1073 K and 1173 K, and then to FCC + A2+B2 phase at 1273 K and 1373 K. The kinetic analysis was performed based on the flow stress data by using the hyperbolic sine law constitutive models with a higher the correlation coefficient (R2). Using combination of kinetics analysis and microstructure evolution results, it can be concluded that there was a gradual transformation of the dominant deformation mechanism from the symbiosis effects of grain boundary sliding (GBS) in fine grains and local dislocation gliding in coarse grains at 1073 K to the dislocation climbing mechanisms at 1373 K. The flow stress decreased with the decreasing strain rate and/or increasing true strain, as well as the deformation temperature. At 1073 K and 1173 K, the flow softening was primarily associated with the GBS of ultrafine dynamic recrystallization (DRX) grains in the local phase transformation regions, as well as the dynamic precipitation of FCC phases. While, the softening effect was primarily controlled by the dynamic precipitation of FCC phases and dynamic recovery (DRV) at 1273 K. When the deformation temperature rose to 1373 K, the main softening mechanisms were the continuous DRX (CDRX) and DRV, as well as the coarsening and dissolution of A2 phases Moreover, the clear serration behaviors at 1373 K/1s−1 and 1373 K/10−3s−1 were induced by the interaction effect between the dislocation and cluster.

Microstructure Characteristics and a Deformation Mechanism of Fine-Grained Tungsten Heavy Alloy under High Strain Rate Compression

Mechanical Behavior and Dynamic Failure of High-Strength Ultrafine Grained Tungsten under Uniaxial Compression

Microstructure Evolution of a High Nb Containing TiAl Alloy with (α2 + γ) Microstructure during Elevated Temperature Deformation

Microstructure evolution and dynamic softening behavior of as-forged Ti-43Al-9V-Y-0.2Y alloy under different deformation parameters

Compressive Behavior of Liquid Phase Sintered 90 W-7Ni-3Fe Heavy Alloy at High Temperature and Low Strain Rate Condition

Constitutive Model and Microstructure Evolution of a Novel TG6 High-Temperature Titanium Alloy during Hot Deformation

Deformation mechanism of fine grained Mg–7Gd–5Y–1.2Nd–0.5Zr alloy under high temperature and high strain rates

High strain rate compression deformation mechanism and constitutive equation of fine grained Mg–7Gd–5Y–1.2Nd–0.5Zr alloy at different temperatures

High strain rate mechanical behavior of Ti-6Al-4V with micro–macro correlation under compressive loading

Hot Deformation Behavior and Microstructural Evolution of As-Forged Ti-44Al-8Nb-(W, B, Y) Alloy with Nearly Lamellar Microstructure

Strain hardening rate and strain rate sensitivity behavior of bcc/fcc-dual-phase tungsten heavy alloy

Effect of Strain Rate on the Plastic Deformation and Fracture of 90W-7Ni-3fe Alloy Prepared by Liquid-Phase Sintering

Microstructure Evolution and Recrystallization after Annealing of Tungsten Heavy Alloy Subjected to Severe Plastic Deformation

High temperature deformation mechanism and microstructural evolution of relatively lightweight AlCoCrFeNi high entropy alloy

The Effect of Strain Rate on the Tensile Deformation Behavior of Single Crystal, Ni-Based Superalloys

High Temperature Deformation Behavior and Microstructure Evolution of Wrought Nickel-Based Superalloy GH4037 in Solid and Semi-Solid States

High-entropy CoCrFeMnNi Alloy Subjected to High-Strain-rate Compressive Deformation

High Temperature Deformation Behavior of Ti–46Al–2Cr–4Nb–0.2Y Alloy

Strain-Rate-Dependent Deformation Behavior of Ti29Zr24Nb23Hf24 High Entropy Alloys at Elevated and Room Temperature

Strain Rate Sensitivity and Adiabatic Shear Deformation of an Advanced Al-Mg Alloy

Microstructure and Microtexture Evolution of Dynamic Recrystallization of a Ni-based Superalloy under High-Throughput Gradient Thermal Compression