Abstract:Cr(VI) as a toxic heavy metal can endanger human physical and mental health. The adsorption method has been widely used for Cr(VI) removal due to its advantages of cost-effectiveness and simplicity of operation. However, the key to Cr(VI) removal by adsorption lies in the construction of adsorption active sites. In this study, Fe 3 O 4 @COF-MT@PPy magnetic composites were prepared by the Schiff base method and in situ polymerisation to construct adsorbents with high specific surface area and abundant amino active sites for the removal of Cr(VI) from wastewater. The TEM and BET results showed that PPy was successfully encapsulated on the Fe 3 O 4 @COF-MT material, and the COF layer provided sites for the polymerisation of PPy, which resulted in a large specific surface area (400.93 m 2 /g) for Fe 3 O 4 @COF-MT@PPy, thus providing more adsorption sites. The VSM results showed that the prepared composites have good magnetic properties (13.8 emu/g) and are easy to separate from aqueous solutions. Encouragingly, the Fe 3 O 4 @COF-MT@PPy composites showed excellent adsorption performance for Cr(VI) in aqueous solution. The maximum adsorption capacity of the material for Cr(VI) was 429.18 mg/g at 298 K, which was much higher than Fe 3 O 4 @COF-MT with Fe 3 O 4 @PPy. Adsorption kinetics and isotherm analyses showed that the adsorption process was more in line with the pseudo-second-order and Langmuir models. The Fe 3 O 4 @COF-MT@PPy composites were able to maintain high adsorption capacity of Cr(VI) after five regenerations, which showed good reusability. In addition, interfering ion experiments demonstrated the selective adsorption of Fe 3 O 4 @COF-MT@PPy on Cr(VI). Using XPS for the analysis, it can be speculated that the adsorption mechanism is due to the abundant amino groups on the surface of the adsorbent firstly exerting electrostatic attraction and ion-exchange effect on the anion Cr(VI), and then the protonated amino groups reduce part of the Cr(VI) to Cr(III), and finally adsorb the Cr(III) on the surface of the material by chelation. Therefore, the recyclable Fe 3 O 4 @COF-MT@PPy has a good potential for adsorption of Cr-containing wastewater.

The Effect of the Crosslink Agent Usage Amount on the NH_2-functionalized Nano-Fe_3o_4 Magnetic Composites

The adsorption property investigation of tetraethylenepentamine functionalized nano-Fe3O4 polymer adsorbents on Cu(II) from wastewater

Adsorption of Platinum(iv) and Palladium(ii) from Aqueous Solution by Magnetic Cross-Linking Chitosan Nanoparticles Modified with Ethylenediamine.

Orientation Growth of N-Doped and Iron-Based Metal–Organic Framework and Its Application for Removal of Cr(VI) in Wastewater

Mechanistic Links Between Magnetic Nanoparticles and Recovery Potential and Enhanced Capacity for Crystal Violet of Nanoparticles-Coated Kaolin

Enhancing Removal of Cr(VI), Pb2+, and Cu2+ from Aqueous Solutions Using Amino-Functionalized Cellulose Nanocrystal

A novel superparamagnetic micro-nano-bio-adsorbent PDA/Fe3O4/BC for removal of hexavalent chromium ions from simulated and electroplating wastewater

TEPA-functionalized magnetic mesoporous composites as a novel adsorbent for the removal Cr(III)-EDTA in complex solution

Fabrication of a Novel NiFe2O4/Zn-Al Layered Double Hydroxide Intercalated with EDTA Composite and Its Adsorption Behavior for Cr(VI) from Aqueous Solution

Investigation of the Adsorption Process of Chromium (VI) Ions from Petrochemical Wastewater Using Nanomagnetic Carbon Materials

Effective adsorptive uptake of hexavalent chromium ions from aqueous systems utilizing a superior activated nanobentonite@cobalt ferrite@carboxymethylcellulose nanocomposite

Bis-amino modified magnetic molasses wastewater hydrochar adsorbent for chromium removal

Crosslinking acrylamide with EDTA-intercalated layered double hydroxide for enhanced recovery of Cr(VI) and Congo red: Adsorptive and mechanistic study

Effective adsorption and removal of Cr(VI) from wastewater using magnetic composites prepared by synergistic effect of polypyrrole and covalent organic frameworks

Amine-functionalized cellulose nanofiber-sodium alginate-Fe(III) porous hollow beads for the efficient removal of Cr(VI)

Highly Efficient Co-Removal of Heavy Metals in Wastewater from Chemical Oxygen Demand Testing Instrument by Cysteine-Functionalized Magnetic Nanoparticles

Amine-functionalized magnetic microspheres from lignosulfonate for industrial wastewater purification

Tetraethylenepentamine modified magnetic cellulose nanocrystal composites for removal of Congo red with high adsorption capacity

Synthesis and characterization of magnetic poly (acrylamide-co-maleic anhydride) grafted gelatin as a novel heavy metal ions wastewater treatment agent

Effect of EDTA on Fe( Ⅲ) dissolution of polymer-based nano-hydrated ferric oxide

Preparation and adsorption performance of polyacryloyloxytrimethylammonium chloride-modified magnetic chitosan microspheres: a novel strategy for treating Cr(VI) ions containing wastewater