Abstract:Force of friction, which blocks tendency of object's motion or relative motion can easily lead to low tracking accuracy of manipulator ann driven by PMSM at low speed or in back-and-forth movement. During the robot positioning, the gravity torque changes all the time. The variation of it is difficult to measure, Which have influence on the control accuracy of the manipulator arm. The traditional friction compensation algorithm does not take the gravity torque of mechanical arm into account, so the friction model lacks accuracy. For those previous methods which treat friction as disturbance and use disturbance observer to estimate it, it is difficult to estimate the friction precisely in low speed due to the existence of strong nonlinearity at this stage. In this paper, to eliminate the effects of friction and disturbance on the system, a Stribeck friction model is used to eliminate the influence of friction on the system. At first, the q-axis current and rotation speed are sampled. Then the friction model parameters are identified via Lagrange interpolation polynomial and least square method after the gravity and friction torques are separated. Considering the heavy torque of mechanical arm, the deviation of friction model when conditions are changing and the load torque as lumped disturbance, a sliding mode disturbance observer is designed for disturbance estimation. The estimate of friction and the observation of lumped disturbances are employed as feedforward compensation. Then combining the proportion feedback together, a corn posite speed controller is obtained. Simulation results indicate that the composite control method in this paper can effectively ameliorate "flat-top" phenomenon of position tracking and "chattering" phenomenon of speed tracking of the servo system, and improve the anti-disturbance ability of servo system.

Simulation on AC Servo Motion Control System Based on Friction Dynamics

Research of the Friction Experiment of XY AC Servo Table

Anti Load Disturbance Method for AC Servo Motor Power System.

Research on the Friction for AC Servo Systems Based on Wavelet Analysis

Adaptive Vibration Control for System with Friction Damping

Switched Sliding Mode Approach for Motion Control Systems with Friction

Slow Motion Control of Serial Robots with Harmonic Drives Considering Friction Compensation

Dynamics and control of space robot considering joint friction

Dynamics analysis of flexible space robot with joint friction

Friction characteristics of a new type of continuous rotary electro-hydraulic servomotor applied to simulator

The Least Square Identification of Static Friction in Servo System

Modeling and Friction Dynamic Compensation for Ultra-large-diametered Hollow Hydraulic Motor Servo System

Compensation of friction and stick-slip uncertainties in trajectory tracking control of servo DC machines considering actuation constraints

Dynamics Identification and Control of Large Load Robots Considering Nonlinear Friction

Design and validation of a novel friction electro-hydraulic loading system

Sliding Mode Controller Design for Position and Speed Control of Flight Simulator Servo System with Large Friction

Multi-Axis Servo System Control Design Considering Low-Speed Friction Dynamics

Modeling of Nonlinear Friction in High Speed Linear Motion Systems

On Friction Compensation Method of Flight Simulation Turntable Systems

Friction compensation and observer-based adaptive sliding mode control of electromechanical actuator

Research On Compound Control Algorithm For Motion Control System