Abstract:We prepared the exfoliation of graphite, which was necessary for the production of graphene sheets that are desirable for the fabrication of nano-composites. Then a Solution-Processable Functionalized Graphene (SPFGraphene) with functionalization groups doped with P3HT hybrid thin film-based organic photovoltaic cells (OPVCs) was systematically identified using a general device structure of, ITO/PEDOT:PSS/P3HT:SPFGraphene/LiF/Al. The effect of annealing on the photoelectric properties of the SPFGraphene was analyzed by Fourier transform infrared FT-IR spectroscopy and solar cell performance. After treatment at different annealing temperatures, with an increase in the SPFGraphene content, the short-circuit current density J(sc) and power conversion efficiency PCE of the hybrid devices increased first, reaching the peak efficiency for the 10 wt% SPFGraphene content, and then decreased. After annealing at 160 degrees C, the device containing 10 wt% SPFGraphene showed the open-circuit voltage V-oc of 0.73 V, the J(sc) value of 3.98 mA cm(-2), fill factor (FF) value of 0.36, the POE value of 1.046%. After thermal annealing at 210 degrees C, with the removal of the functional groups and recovery of the pi-conjugated areas, the conductivity of the graphene sheet and the charge carrier-transport mobility increased greatly, the J(sc) of the 10 wt% SPFGraphene content device increased to 4.2 mA cm(-2), the V-oc value decreased to 0.59 V, which may be attributed to the altered work-function value of the functionalized graphene and low quasi-Fermi levels for electrons and holes, the FF value was 0.27, and the POE was 0.669%, which is lower than the former one. The results indicated that annealing at the appropriate temperature can improve the device performance greatly, and the functionalized graphene is expected to be a competitive candidate in organic photovoltaic applications because it is soluble, cheap, easily prepared, stable, and inert against the ambient conditions.

Composition and annealing effects in solution-processable functionalized graphene oxide/P3HT based solar cells

Organic photovoltaic devices based on an acceptor of solution-processable functionalized graphene.

Polymer Photovoltaic Cells Based on Solution‐Processable Graphene and P3HT

Improving the Performance of Polymer Solar Cells by Efficient Optimizing the Hole Transport Layer-Graphene Oxide

Soluble P3HT-grafted Graphene for Efficient Bilayer-Heterojunction Photovoltaic Devices.

A Two-Step Thermal Annealing and Hno3 Doping Treatment for Graphene Electrode and Its Application in Small-Molecule Organic Solar Cells

Quantitative Nanoscale Monitoring the Effect of Annealing Process on the Morphology and Optical Properties of Poly(3-Hexylthiophene)/[6,6]-phenyl C61-butyric Acid Methyl Ester Thin Film Used in Photovoltaic Devices

Interface Modification of Polymer Solar Cells Using Graphene Oxide and TiO2 NPs

Optimization of thermally reduced graphene oxide for an efficient hole transport layer in polymer solar cells

Investigating the Effect of Thermal Annealing Process on the Photovoltaic Performance of the Graphene-Silicon Solar Cell

Interfacial Engineering with Amino-Functionalized Graphene for Efficient Perovskite Solar Cells

Annealed Treatment Effect in Poly(3-hexylthiophene):Methanofullerene Solar Cells

Graphene Oxide by Uv-Ozone Treatment As an Efficient Hole Extraction Layer for Highly Efficient and Stable Polymer Solar Cells

Solution Processed Hybrid Graphene-MoO3 Hole Transport Layers for Improved Performance of Organic Solar Cells

Interface Functionalization Of Photoelectrodes With Graphene For High Performance Dye-Sensitized Solar Cells

Annealing Treatment Effects on the Performances of Solar Cells Based on Different Solvent Blend Systems

Study of the effect of annealing process on the performance of P3HT/PCBM photovoltaic devices using scanning-probe microscopy

Annealing Treatment Effects on the Performances of Solar Cells Based on Different Composition Systems

Interface-induced crystalline ordering and favorable morphology for efficient annealing-free poly(3-hexylthiophene): fullerene derivative solar cells.

Effects of thermal annealing on polymer photovoltaic cells with buffer layers and in situ formation of interfacial layer for enhancing power conversion efficiency

Improved Power Conversion Efficiency of P3HT:PCBM Organic Solar Cells by Strong Spin-Orbit Coupling-Induced Delayed Fluorescence