A SOLUTION TO TUNNELING PROBLEM IN REAL-TIME COLLISION DETECTION

韩光辉,徐鹏飞,周明全

2011-01-01

Abstract:A fast and accurate technique for solving the tunneling problem in real time collision detection is introduced in this paper. Methods to prevent collision misses or interpenetrations are presented and compared in regards to both real-time aspect and accuracy.

What problem does this paper attempt to address?

A Parallel Collision Detection Algorithm Based On Hybrid Bounding Volume Hierarchy

Wan Huagen,Fan Zhaowei,Gao Shuming,Peng Qunsheng

2001-01-01

Abstract:One of the key problems with current interactive virtual environments is real-time collision detection. In this paper, a parallel algorithm for real-time, exact collision detection is presented. The approach adopts a hierarchical adaptive space subdivision scheme to construct a hybrid bounding representation of arbitrary non-convex polyhedra for attaining its speed, and speeds up collision detection further by traversing the built hybrid bounding volume hierarchy in parallel. The algorithm falls into MIMD synchronous parallel algorithms and is implemented with multi-threads, which enable it to run on both single processor computers and multi-processor computers. It is suitable for dynamic and complex scenes.
Fast Collision Detection Based on Swept Tracing Primitives

Xu Zhiqi,Chen Zhiyang,Ye Xiuzi,Zhang Sanyuan

2008-01-01

Journal of Computer-Aided Design & Computer Graphics

Abstract:A fast method for collision detection is proposed in this paper,which is based on swept tracing primitives.The method consists of the following four main parts:first,the input model is sampled and primitive curves are created;second,planar slices are generated along the curved trajectory,special planar meshes are obtained from the intersecting points between slices and primitive curves,and the boundary vertices of these meshes are extracted;third,swept primitive curves are created through the boundary vertices;fourth,the times and areas of the collisions can be detected fast with the swept primitive curves.Examples show that the proposed is robust and efficient in addition to its high-precision detections.
Intrusion Detection And Simulation For High-Speed Networks

Fei Yu,XiaoPing Dai,Yue Shen,Huang Huang,Miaoliang Zhu

DOI: https://doi.org/10.1109/ICSSSM.2005.1500110

2005-01-01

Abstract:The problem in network security presently is how to get real-time intrusion detection and alert. In the paper, we design Intrusion Detection System architecture and arithmetic again, meanwhile put forward an improved pattern matching arithmetic based on protocol analysis and theorization machine on Frete. New architecture can use network processor to collect and analyze data in network bottom, which enhance the speed and efficiency in Detection System.
Walking down the STAIRS: Efficient collision resolution for wireless sensor networks

Xiaoyu Ji,Yuan He,Jiliang Wang,Wei Dong

DOI: https://doi.org/10.1109/INFOCOM.2014.6848025

2014-01-01

Abstract:Collision resolution is a crucial issue in wireless sensor networks. The existing approaches of collision resolution have drawbacks with respect to energy efficiency and processing latency. In this paper, we propose ST AIRS, a time and energy efficient collision resolution mechanism for wireless sensor networks. STAIRS incorporates the constructive interference technique in its design and explicitly forms superimposed colliding signals. Through extensive observations and theoretical analysis, we show that the RSSI of the superimposed signals exhibit stairs-like phenomenon with different number of contenders. That principle offers an attractive feature to efficiently distinguish multiple contenders and in turn makes collision-free schedules for channel access. In the design and implementation of STAIRS, we address practical challenges such as contenders alignment, online detection of RSSI change points, and fast channel assignment. The experiments on real testbed show that STARIS realizes fast and effective collision resolution, which significantly improves the network performance in terms of both latency and throughput.
Fast Continuous Collision Detection Using Deforming Non-Penetration Filters.

Min Tang,Dinesh Manocha,Ruofeng Tong

DOI: https://doi.org/10.1145/1730804.1730806

2010-01-01

Abstract:We present a novel culling algorithm that uses deforming non-penetration filters to improve the performance of continuous collision detection (CCD) algorithms. The underlying idea is to use a simple and effective filter that reduces both the number of false positives and the elementary tests between the primitives. This filter is derived from the coplanarity condition and can be easily combined with other methods used to accelerate CCD. We have implemented the algorithm and tested its performance on many non-rigid simulations. In practice, we can reduce the number of false positives significantly and improve the overall performance of CCD algorithms by 1.5--8.2x.
Fast and accurate continuous collision detection between rigid bodies

tong-lang HUANG,min TANG,jin-xiang DONG

DOI: https://doi.org/10.3785/j.issn.1008-973X.2006.06.027

2006-01-01

Abstract:To detect the collision between moving rigid bodies accurately and rapidly, a novel continuous collision detection algorithm was presented. By fully exploiting the computation ability of graphics hardware, the algorithm performed well at each time interval in real-time with the time interval being divided into several sub-intervals. By using static and continuous overlap detection method for oriented bounding boxes (OBB), a potentially colliding set (PCS) of sub-intervals was computed. The initial collision times and positions among the rigid bodies were calculated by using reliable collisions culling method based on graphics hardware, collision detection method among triangle facets and backtracking method. The algorithm was used in an assembly module of a 3D modeling system. The experimental results show that compared with conventional collision detection algorithms, the proposed algorithm can reduce calculation time and has better performance and accuracy.
Optimized Space Decomposition Algorithm for Parallel Continuous Collision Detection

Peng Du,Min Tang,Ruofeng Tong

2013-01-01

Abstract:Continuous collision detection for deformable meshes in complex scenes is still hard to perform in real time. Therefore, we propose a novel parallel collision detection algorithm to improve the overall performance of continuous collision detection. In our method, we present a space decomposition method to parallel bounding volume hierarchy updating, and then we present a dynamic task assignment method to balance the load of collision detection evenly among different cores. Finally, we combined our method with a front based parallel collision detection algorithm and tested its performance on several benchmarks including surface and volume meshes. Compared with previous algorithms, our algorithm can improve the efficiency of collision detection.
A Unified Cloth Untangling Framework Through Discrete Collision Detection

Juntao Ye,Guanghui Ma,Liguo Jiang,Lan Chen,Jituo Li,Gang Xiong,Xiaopeng Zhang,Min Tang

DOI: https://doi.org/10.1111/cgf.13287

IF: 2.5

2017-01-01

Computer Graphics Forum

Abstract:We present an efficient and stable framework, called Unified Intersection Resolver (UIR), for cloth simulation systems where not only impending collisions but also pre-existing penetrations often arise. These two types of collisions are handled in a unified manner, by detecting edge-face intersections first and then forming penetration stencils to be resolved iteratively. A stencil is a quadruple of vertices and it reveals either a vertex-face or an edge-edge collision event happened. Each quadruple also implicitly defines a collision normal, through which the four stencil vertices can be relocated, so that the corresponding edge-face intersection disappear. We deduce three different ways, i.e., from predefined surface orientation, from history data and from global intersection analysis, to determine the collision normals of these stencils robustly. Multiple stencils that constitute a penetration region are processed simultaneously to eliminate penetrations. Cloth trapped in pinched environmental objects can be handled easily within our framework. We highlight its robustness by a number of challenging experiments involving collisions.
Parallel Collision Detection on Multi-core Platform

Peng Du,Min Tang,Ruofeng Tong

2011-01-01

Abstract:Continuous collision detection among deformable objects in complex scenes is still hard to perform in real time. To speedup processing, after analyzing the key factors for parallel collision detection, we present a parallel collision detection algorithm based on data partitioning. The algorithm is divided into two phases. In the initial phase, the scene data is partitioned from the view of space. In the collision detection phase, each data block is processed by one processor to update bounding volume parallel, while a static and dynamic task allocation strategy is adopted to make collision detection parallel. Compared with existing algorithms under 16 and 24 cores, it is shown that the algorithm can improve the efficiency of collision detection with good compatibility.
TightCCD: Efficient and Robust Continuous Collision Detection Using Tight Error Bounds

Zhendong Wang,Min Tang,Ruofeng Tong,Dinesh Manocha

DOI: https://doi.org/10.1111/cgf.12767

IF: 2.5

2015-01-01

Computer Graphics Forum

Abstract:We present a realtime and reliable continuous collision detection (CCD) algorithm between triangulated models that exploits the floating point hardware capability of current CPUs and GPUs. Our formulation is based on Bernstein Sign Classification that takes advantage of the geometry properties of Bernstein basis and Bezier curves to perform Boolean collision queries. We derive tight numerical error bounds on the computations and employ those bounds to design an accurate algorithm using finite-precision arithmetic. Compared with prior floatingpoint CCD algorithms, our approach eliminates all the false negatives and 90-95% of the false positives. We integrated our algorithm (TightCCD) with physically-based simulation system and observe speedups in collision queries of 5-15X compared with prior reliable CCD algorithms. Furthermore, we demonstrate its benefits in terms of improving the performance or robustness of cloth simulation systems.
Collision Detection Methods for Virtual Environment

魏迎梅,石教英,吴泉源

DOI: https://doi.org/10.3969/j.issn.1007-130X.2001.02.012

2001-01-01

Abstract:Efficient and exact collision detec tion is very important to improving reality and enhancing immersion for virtual environment,and the complexity and real-time property of virtual environment br ing new requirements to collision detection.This paper introduces two collision detection algorithms,one is the famous method based on the oriented bounding box ,the other is our method based on the fixed direction hull.An analysis and compa rison is made between them.It is proved through experiments that our method not only improves the performance,but also meets the needs of complex environments．
DESIGN SAFETY MONITORING SYSTEM FOR INTELLIGENT TUNNEL TRAFFIC BASED ON VIDEO DETECTION PROCESSING

Yang Ping,Li Xiaorun

DOI: https://doi.org/10.3969/j.issn.1000-386X.2012.06.034

2012-01-01

Abstract:Real-time tunnel traffic safety monitoring system is an important means to ensure secure operation of tunnel.Aiming at the particularity of the environment in tunnel,a vehicle detection algorithm based on accumulation of difference depth matrix and a vehicle tracking algorithm based on Kalman filter are proposed,by which the detection and tracking of multiple moving vehicles are achieved.An intelligent tunnel traffic safety monitoring system based on video detection processing is designed in this paper using the techniques of image processing,computer vision,pattern recognition and software engineering,etc.The system can accurately detect various traffic operation parameters and traffic events,and provide strong guarantee for tunnel traffic safety.
Real-time Collision Detection between General SDFs

Pengfei Liu,Yuqing Zhang,He Wang,Milo K. Yip,Elvis S. Liu,Xiaogang Jin

DOI: https://doi.org/10.1016/j.cagd.2024.102305

IF: 1.368

2024-04-27

Computer Aided Geometric Design

Abstract:Signed Distance Fields (SDFs) have found widespread utility in collision detection applications due to their superior query efficiency and ability to represent continuous geometries. However, little attention has been paid to calculating the intersection of two arbitrary SDFs. In this paper, we propose a novel, accurate, and real-time approach for SDF-based collision detection between two solids, both represented as SDFs. Our primary strategy entails using interval calculations and the SDF gradient to guide the search for intersection points within the geometry. For arbitrary objects, we take inspiration from existing collision detection pipelines and segment the two SDFs into multiple parts with bounding volumes. Once potential collisions between two parts are identified, our method quickly computes comprehensive intersection information such as penetration depth, contact points, and contact normals. Our method is general in that it accepts both continuous and discrete SDF representations. Experiment results show that our method can detect collisions in high-precision models in real time, highlighting its potential for a wide range of applications in computer graphics and virtual reality.

computer science, software engineering,mathematics, applied
Efficient BVH-based Collision Detection Scheme with Ordering and Restructuring.

Xinlei Wang,Min Tang,Dinesh Manocha,Ruofeng Tong

DOI: https://doi.org/10.1111/cgf.13356

IF: 2.5

2018-01-01

Computer Graphics Forum

Abstract:Bounding volume hierarchy (BVH) has been widely adopted as the acceleration structure in broad-phase collision detection. Previous state-of-the-art BVH-based collision detection approaches exploited the spatio-temporal coherence of simulations by maintaining a bounding volume test tree (BVTT) front. A major drawback of these algorithms is that large deformations in the scenes decrease culling efficiency and slow down collision queries. Moreover, for front-based methods, the inefficient caching on GPU caused by the arbitrary layout of BVH and BVTT front nodes becomes a critical performance issue. We present a fast and robust BVH-based collision detection scheme on GPU that addresses the above problems by ordering and restructuring BVHs and BVTT fronts. Our techniques are based on the use of histogram sort and an auxiliary structure BVTT front log, through which we analyze the dynamic status of BVTT front and BVH quality. Our approach efficiently handles inter- and intra-object collisions and performs especially well in simulations where there is considerable spatio-temporal coherence. The benchmark results demonstrate that our approach is significantly faster than the previous BVH-based method, and also outperforms other state-of-the-art spatial subdivision schemes in terms of speed.
PolyDepth: Real-time Penetration Depth Computation Using Iterative Contact-Space Projection

Changsoo Je,Min Tang,Youngeun Lee,Minkyoung Lee,Young J. Kim

DOI: https://doi.org/10.1145/2077341.2077346

2012-01-01

Abstract:We present a real-time algorithm that finds the Penetration Depth (PD) between general polygonal models based on iterative and local optimization techniques. Given an in-collision configuration of an object in configuration space, we find an initial collision-free configuration using several methods such as centroid difference, maximally clear configuration, motion coherence, random configuration, and sampling-based search. We project this configuration on to a local contact space using a variant of continuous collision detection algorithm and construct a linear convex cone around the projected configuration. We then formulate a new projection of the in-collision configuration onto the convex cone as a Linear Complementarity Problem (LCP), which we solve using a type of Gauss-Seidel iterative algorithm. We repeat this procedure until a locally optimal PD is obtained. Our algorithm can process complicated models consisting of tens of thousands triangles at interactive rates.
Collision-streams: fast GPU-based collision detection for deformable models.

Min Tang,Dinesh Manocha,Jiang Lin,Ruofeng Tong

DOI: https://doi.org/10.1145/1944745.1944756

2011-01-01

Abstract:We present a fast GPU-based streaming algorithm to perform collision queries between deformable models. Our approach is based on hierarchical culling and reduces the computation to generating different streams. We present a novel stream registration method to compact the streams and efficiently compute the potentially colliding pairs of primitives. We also use a deferred front tracking method to lower the memory overhead. The overall algorithm has been implemented on different GPUs and we have evaluated its performance on non-rigid and deformable simulations. We highlight our speedups over prior CPU-based and GPU-based algorithms. In practice, our algorithm can perform inter-object and intra-object computations on models composed of hundreds of thousands of triangles in tens of milliseconds.
Graphics Hardware Accelerated Continuous Collision Detection Between Deformable Objects

TANG Min,LIN Jiang,TONG Ruo-Feng

DOI: https://doi.org/10.3724/sp.j.1016.2010.02022

2010-01-01

Chinese Journal of Computers

Abstract:This paper presents a graphics hardware accelerated continuous collision detection algorithm for deformable objects.It can detect all inter-object and intra-object collisions for complex scenes which consist of deformable objects in real time.The algorithm executes collision detection tasks fully in parallel by mapping them with streaming decomposition.With parallel streaming registration algorithm,variable length data structures are efficiently supported on graphics hardware.The algorithm has been implemented on AMD graphics hardware platform with OpenCL.A serial of benchmarks with different characteristics are used for testing.Comparing to an optimized single-threaded CPU implementation on Intel Q6600@2.4 GHz,the algorithm achieves 9.2x~11.4x speedups.
High-speed Algorithm for Accurate Collision Detection During Particle Aggregation

Ya-fei WANG,Qun-xing HUANG,Fei WANG,Yong CHI,Jian-hua YAN

DOI: https://doi.org/10.3785/j.issn.1008-973x.2019.06.014

2019-01-01

Abstract:The traditional algorithms of collision detection often have poor execution efficiency in dealing with the aggregation following collision of a large number of particles. Therefore, a two-step, fast and accurate algorithm of collision detection was proposed based on the pretreatment of bounding sphere and maximum detection region. In the broad phase, all aggregates were represented by bounding spheres with low update cost. The detection of collisions between bounding spheres was converted into solving the problem of quadratic equations regarding time, and all possible collisions were detected fast by solving these equations parallelly. The detection of collisions outside the maximum detection region was ignored to further reduce execution time. In the narrow phase, the specific time and position of collisions were rapidly determined by discrete collision detection, where sampling time intervals were self-adaptive and decreasing. Simulation results were compared with those by non-optimized traditional algorithms, and it was found that, on the premise of meeting the same accuracy of collision detection the algorithm proposed here could increase the execution efficiency 10 to 30 times, indicating that this algorithm is more applicable to collision detection during the aggregation process of a large number of particles.
Efficient point cloud collision detection and analysis in a tunnel environment using kinematic laser scanning and K-D Tree search

J. Schauer,A. Nüchter

DOI: https://doi.org/10.5194/isprsarchives-xl-3-289-2014

2014-08-11

Abstract:Abstract. Measuring the structure gauge of tunnels and other narrow passages has so far been the only way to evaluate whether large vehicles can pass through them. But especially for very long vehicles like train wagons and their cargo, the structure gauge is an insufficient measure because the center part of the vehicle between two bogies will inevitably leave the swept volume of its cross section when moving along any other trajectory than a straight line perpendicular to its cross section. In addition, the vehicle as well as the cargo must keep a minimum safety margin from the environment at all points of its trajectory. This paper explores an automated method to check for possible collisions of a model represented by a 3D point cloud moving through the 3D point cloud of an environment. We were given environment data of a train track through a narrow tunnel where simply relying on the structure gauge would indicate that a given wagon would pass through without any collision even though in reality, the train wagon would collide with the inner tunnel wall inside a sharp turn of the tracks. The k-d tree based collision detection method presented in this paper is able to correctly highlight these collisions and indicate the penetration depth of each colliding point of the environment into the model of the train wagon. It can be generalized for any setup where two static point clouds have to be tested for intersection along a trajectory.
Efficient Collision Determination for Dynamic Scenes using Coherent Separating Axis

Lu Chen,Wei Hua,Zhong Ren,Hujun Bao

2009-01-01

Abstract:We present an efficient algorithm for collision determination of dynamic objects undergoing rigid motion or general deformation. Our technique deals with triangulated models, and it requires no further assumption of the objects' geometry and topology. Particularly, it efficiently handles non-convex, or even polygon-soup models, enduring any deformation process. Furthermore, it requires no complex pre-processing, making it suitable for dynamic settings such as games or production line simulation. The proposed technique is based on a dynamic binary space partitioning process, which is accelerated by a temporal coherent separating axis algorithm. For stable contact determination of complex geometry, we first obtain a velocity-related penetration vector pair for every intersected triangle pair by tracing the movement on the separating axis, then, propagate the process to the whole contact region. Our method shows real-time performance and good stability for moderate complex environment.

A SOLUTION TO TUNNELING PROBLEM IN REAL-TIME COLLISION DETECTION

A Parallel Collision Detection Algorithm Based On Hybrid Bounding Volume Hierarchy

Fast Collision Detection Based on Swept Tracing Primitives

Intrusion Detection And Simulation For High-Speed Networks

Walking down the STAIRS: Efficient collision resolution for wireless sensor networks

Fast Continuous Collision Detection Using Deforming Non-Penetration Filters.

Fast and accurate continuous collision detection between rigid bodies

Optimized Space Decomposition Algorithm for Parallel Continuous Collision Detection

A Unified Cloth Untangling Framework Through Discrete Collision Detection

Parallel Collision Detection on Multi-core Platform

TightCCD: Efficient and Robust Continuous Collision Detection Using Tight Error Bounds

Collision Detection Methods for Virtual Environment

DESIGN SAFETY MONITORING SYSTEM FOR INTELLIGENT TUNNEL TRAFFIC BASED ON VIDEO DETECTION PROCESSING

Real-time Collision Detection between General SDFs

Efficient BVH-based Collision Detection Scheme with Ordering and Restructuring.

PolyDepth: Real-time Penetration Depth Computation Using Iterative Contact-Space Projection

Collision-streams: fast GPU-based collision detection for deformable models.

Graphics Hardware Accelerated Continuous Collision Detection Between Deformable Objects

High-speed Algorithm for Accurate Collision Detection During Particle Aggregation

Efficient point cloud collision detection and analysis in a tunnel environment using kinematic laser scanning and K-D Tree search

Efficient Collision Determination for Dynamic Scenes using Coherent Separating Axis