Abstract:The maximum sensitivity function as the conventional robustness index is often used to test the robustness and cannot be used to tune the controller parameters directly. To reduce analytical difficulties in dealing with the maximum sensitivity function and improve the control performance of the proportional-integral-derivative controller, the relative delay margin as a good alternative is proposed to offer a simple robust analysis for the proportional-integral-derivative controller and the first-order plus dead-time systems. The relationship between the parameters of the proportional-integral-derivative controller and the new pair, e.g., the phase margin and the corresponding gain crossover frequency, is derived. Based on this work, the stability regions of the proportional-integral-derivative controller parameters, the proportional gain and the integral gain with a given derivative gain, are obtained in a simple way. The tuning of the proportional-integral-derivative controller with constraints on the relative delay margin is simplified into an optimal disturbance rejection problem and the tuning procedure is summarized. For convenience, the recommended parameters are also offered. Simulation results demonstrate that the proposed methodology has better tracking and disturbance rejection performance than other comparative design methodologies of the proportional-integral/proportional-integral-derivative controller. For example, the integrated absolute errors of the proposed proportional-integral-derivative controller for the tracking performance and disturbance rejection performance are less than 91.3% and 91.7% of the integrated absolute errors of other comparative controllers in Example 3, respectively. The proposed methodology shows great potential in industrial applications. Besides, the proposed method can be applied to the design of the proportional-integral-derivative controller with filtered derivative which is recommended for practical applications to weaken the adverse influence of the high-frequency measurement noise.

Auto Disturbance Rejection PID Controller for Time-Delay Systems

Performance assessment of PID controller with time-variant disturbance dynamics

An Optimal Self-Tuning PID Controller Considering Parameter Estimation Uncertainty

A multivariable nonlinear self-tuning PID controller

Performance monitoring and assessment for PID controller

On Parameter Design for Predictive Control with Adaptive Disturbance Model

PID Parameters Auto-Tuning Method for Industrial Temperature Adjustment

Frequency behavior analysis for predictive control with adaptive disturbance model

Optimum Study of Auto-disturbance-rejection Controller for High-order Systems

PID CONTROL FOR INTEGRATOR AND DEAD TIME PROCESS

Quantitative Tuning of Active Disturbance Rejection Controller for FOPTD Model With Application to Power Plant Control

Relay Auto-Tuning Control Technique of PID Based on IAE for a General System with Large Time-Varying Time Delay

A PID Controller with Desired Closed-Loop Time Response and Stability Margin

Discrete PID Control for Integrator Processes with Time Delay

A Novel Auto-Tuning Robust Pid Controller for Networked Control System

Two-degrees-of-freedom PID Controller Tuning Method

An ADRC‐based PID Tuning Rule

Relay-Based Autotuning of PID Controller for Improved Load Disturbance Rejection

A new PID controller design with constraints on relative delay margin for first-order plus dead- time systems

Optimal Tuning of PID Controllers for Under-Damped Systems

Tuning of Pid Controller for the Integrating Systems