Abstract:The aim of this paper is to present a decomposition and multistage approach for optimizing the design of water distribution systems with multiple supply sources (WDS-MSS). An algorithm is first proposed to identify the optimal source partitioning cut-set for a WDS-MSS. A WDS with K supply sources is therefore decomposed to K disconnected subnetworks by the removal of the determined cut-set. Then, a total of K separate differential evolution (DE) algorithms are used to optimize the designs for the K subnetworks, respectively. This is the first optimization stage. The optimal solutions for the K subnetworks plus the optimal cut-set being the minimum allowable pipe sizes are used to create a tailored seeding table. This table is used to initialize a second-stage DE algorithm to optimize the whole of the original WDS, which is the second stage of the optimization process. Four WDS-MSS case studies are used to demonstrate the effectiveness of the proposed method. A standard DE algorithm seeded by the total choice table rather than the tailored seeding table is applied to the entire network for each case study, and the results are compared with those of the proposed method in terms of efficiency and solution quality. The comparison demonstrates that the proposed method (i.e., decomposition followed by multistage optimization) shows better performance than results from a whole of network optimization. In addition, the proposed method also exhibits significantly improved performance compared with the optimization techniques that have been previously used to optimize these case studies. Citation: Zheng, F., A. R. Simpson, and A. C. Zecchin (2013), A decomposition and multistage optimization approach applied to the optimization of water distribution systems with multiple supply sources, Water Resour. Res., 49, doi: 10.1029/2012WR013160.

Optimal Design of Single‐contaminant Regeneration Reuse Water Networks with Process Decomposition

Optimal Design of Multiple-Contaminant Regeneration Reuse Water Networks with Process Decomposition

Graphically Based Optimization of Single-Contaminant Regeneration Reuse Water Systems

An Iterative Method for Designing Water-Using Networks of Single Contaminant Involving Regeneration Reuse/recycling

A graph decomposition‐based approach for water distribution network optimization

Optimum Design of Water-using Network with Regeneration Reuse

Design of Water Network with Internal Mains for Multi-contaminant Wastewater Regeneration Recycle

An iterative design approach for water networks with multiple regeneration units

Conceptual Approach for Targeting Water Allocation Networks

A decomposition and multistage optimization approach applied to the optimization of water distribution systems with multiple supply sources

Grass-roots design of regeneration recycling water networks

Optimization of water-using network in batch processes involving regeneration operation

Optimal Operation of Residual Chlorine Concentration in Multi-Source Water Distribution System

An Improved Genetic Algorithm For Optimal Layout Of Flow Meters And Valves In Water Network Partitioning

Optimal Targets of Two Parallel Regeneration Recycling Water Networks

Optimal Design of an Integrated Discontinuous Water-Using Network Coordinating with a Central Continuous Regeneration Unit

On the Use of Graphical Method to Determine the Targets of Single-Contaminant Regeneration Recycling Water Systems

Optimum Design Of Water-Utilize Systems Featuring Regeneration Re-Use For Multiple Contaminants

Energy and Water Management for Industrial Large-Scale Water Networks: A Systematic Simultaneous Optimization Approach

Design Energy Efficient Water Utilization Systems Allowing Operation Split

Graphical Targeting Approach of Water Networks with Two-Stage Regeneration Recycling