Abstract:A laboratory membrane bioreactor (MBR) using a submerged polyethylene hollow-fibre membrane module with a pore size of 0.4μm and a total surface area of 0.2m2 was used for treating a raw water supply slightly polluted by domestic sewage. The feeding influent had a total organic carbon (TOC) level of 3–5mg/L and an ammonia nitrogen (NH3-N) concentration of 3–4mg/L. The MBR ran continuously for more than 500 days, with a hydraulic retention time (HRT) as short as 1h or less. Sufficient organic degradation and complete nitrification were achieved in the MBR effluent, which normally had a TOC of less than 2mg/L and a NH3-N of lower than 0.2mg/L. The process was also highly effective for eliminating conventional water impurities, as demonstrated by decreases in turbidity from 4.50±1.11 to 0.08±0.03 NTU, in total coliforms from 105/mL to less than 5/mL and in UV254 absorbance from 0.098±0.019 to 0.036±0.007cm−1. With the MBR treatment, the 3-day trihalomethane formation potential (THMFP) was significantly reduced from 239.5±43.8 to 60.4±23.1μg/L. The initial chlorine demand for disinfection decreased from 22.3±5.1 to 0.5±0.1mg/L. The biostability of the effluent improved considerably as the assimilable organic carbon (AOC) decreased from 134.5±52.7 to 25.3±19.9μg/L. All of these water quality parameters show the superior quality of the MBR-treated water, which was comparable to or even better than the local tap water. Molecular size distribution analysis and the hydrophobic characterisation of the MBR effluent, in comparison to the filtered liquor from the bioreactor, suggest that the MBR had an enhanced filtration mechanism. A sludge layer on the membrane surface could have functioned as an additional barrier to the passage of typical THM precursors, such as large organic molecules and hydrophobic compounds. These results indicate that the MBR with a short HRT could be developed as an effective biological water treatment process to address the urgent need of many developing countries that are plagued by the serious contamination of surface water resources.

Application of membrane bioreactor in treatment of micro-polluted source water

Pesticide Wastewater Treatment by a Membrane Bioreactor

Study on Anaerobic Membrane Bioreactor and Its Applications for Wastewater Treatment

Applications of membrane bioreactors for water reclamation: Micropollutant removal, mechanisms and perspectives

Analysis on technical structure and operating parameters of membrane bioreactor (MBR) in application

Pollutant Removal Pathways and Membrane Filtration in Membrane Bioreactor

Recent Advances in Membrane Biofilm Reactor for Micropollutants Removal: Fundamentals, Performance and Microbial Communities

4.5 Membrane Bioreactor Application in Water Treatment

An A/O submerged membrane bioreactor and its membrane fouling research in treating bathing wastewater

Membrane Bioreactor for Treatment of Micro-polluted River Water

State-of-the-Art Review on the Application of Membrane Bioreactors for Molecular Micro-Contaminant Removal from Aquatic Environment

Membrane Cleaning in Membrane Bioreactors: A Review

Strategies to enhance micropollutant removal from wastewater by membrane bioreactors: Recent advances and future perspectives

Membrane Fouling Mechanisms and Control in MBR/PAC Process for Treatment of Micro-polluted Source Water

Recent Advances in Membrane Bioreactors: Configuration Development, Pollutant Elimination, and Sludge Reduction

Study on Municipal Wastewater Treatment by a Submerged Membrane Bioreactor

Membrane bioreactor for the drinking water treatment of polluted surface water supplies.

Application and Bioaugmentation of MBR in Wastewater Treatment: An Overview

Pilot-scale Study on PAC/MBR for Treatment of Micro-polluted Surface Water

Micro-Polluted Surface Water Treatment by PAC-MBR Process

Domestic wastewater treatment and membrane fouling control by an innovative MBR system combined with adsorption and rough-sedimentation