Abstract:Additive manufacturing and annealing process of short carbon fiber‐reinforced nylon 6. The mechanical properties of short carbon fiber‐reinforced nylon 6 (CF‐PA6) components formed by fused filament fabrication (FFF) are significantly affected by the process parameters of additive manufacturing and heat treatment. In this study, the effects of printing speed, carbon fiber aspect ratio, and annealing temperature on fiber orientation were investigated by observation of single‐layer‐single‐fiber samples. Furthermore, a two‐stage annealing process was proposed to increase the tensile modulus of CF‐PA6 based on the correlation analysis results between the degree of fiber alignment and the variation of tensile modulus. According to the calculation of the Pearson correlation coefficient, the tensile modulus was highly correlated with the degree of fiber alignment under different printing speeds and fiber aspect ratios. The variation in tensile modulus and fiber orientation was also consistent when the annealing temperature was lower than the crystallization temperature. Conversely, the variation of tensile modulus and fiber orientation were opposite, as the annealing temperature was higher than the crystallization temperature because of the influence of crystallinity. Through increasing the degree of fiber alignment and crystallinity of the parts, the proposed two‐stage annealing method could increase the tensile modulus of the parts to 9.0 GPa, which was 16.81% higher than that of single‐temperature annealing. Highlights The effects of annealing temperature, carbon fiber aspect ratio and printing speed on fiber orientation were illustrated. The relationship between the degree of fiber alignment and the variation of tensile modulus was established. The proposed two‐stage annealing method, considering fiber orientation and crystallinity, significantly increased the tensile modulus of CF270‐PA6 parts from 7.7 to 9.0 GPa. The quantitative analysis of the fiber orientation is realized by the statistical analysis of the plane fiber orientation angle of the single‐layer‐single‐fiber sample.

Effect of crystallinity level on the double yielding behavior of polyamide 6

Structure Evolution and Properties Enhancement of Polyamide‐6/polyamide‐1010 Films under Uniaxial and Biaxial Stretching

Elucidating Isothermal Crystallization Behaviors of Nylon-11S. Influence of Star-Chain Branching

Modeling the Effect of Physical Aging on the Stress Response of Amorphous Polymers Based on a Two-Temperature Continuum Theory

Additive Manufacturing of Polyamide 66: Effect of Process Parameters on Crystallinity and Mechanical Properties

INFLUENCE OF THERMAL TREATMENT ON CRYSTAL MELTING BEHAVIOR AND CRYSTAL STRUCTURE OF NYLON 6 AND POLYAMIDE BLOCK COPOLYMER/NYLON 6 BLENDS

Structural Origin of Double Yielding: the Critical Role of Crystallite Aggregate Heterogeneity

The effect of stretching on polyamide – 6: assessment of crystallinity, mechanical properties, and surface roughness

Effect of Thermal Oxidative Aging on the Crystallization Behavior and Properties of Nylon-6

Effect of Initial Molecular Weight on the Structural Evolution of Polyamide 1012 during High-Temperature Thermal Treatments as Revealed by Successive Self-Nucleation and Annealing

What Determines Yield Stress in Semicrystalline Polymers Within Lamellar Stack Dimensions: Competition Between the Yield Behaviors of Crystalline and Glassy Amorphous Phases

Dynamic Tensile Behavior of Polyamide 6 at Different Strain Rates: Experiments and Constitutive Model

The Effect of Thermal History on Crystalline Structure and Mechanical Properties of Β-Nucleated Isotactic Polypropylene

Structure/property relationship of semi-crystalline polymer during tensile deformation: A molecular dynamics approach

Mechanical behavior and optical transparency of polyamide 6 of different morphology formed by variation of the pathway of crystallization

Strain-Induced Form Transition and Crystallization Behavior of the Transparent Polyamide

Effects of Isotacticity and Annealing on Deformation Mechanism of Hard Elastic Polypropylene Film

Temperature Dependence of Tensile Behavior in Poly(Butylene Terephthalate) with Different Crystallinity

Molecular Mobility in the Amorphous Phase Determines the Critical Strain of Fibrillation in the Tensile Stretching of Polyethylene

Two‐stage annealing method for short carbon fiber‐reinforced nylon 6 in fused filament fabrication

Crystallization and Performance of Polyamide Blends Comprising Polyamide 4, Polyamide 6, and Their Copolymers