Evaluation of Granular Surfactant-Modified/Zeolite Zero Valent Iron Pellets As a Reactive Material for Perchloroethylene Reduction

TA Burt,ZH Li,RS Bowman
DOI: https://doi.org/10.1061/(asce)0733-9372(2005)131:6(934)
IF: 2.479
2005-01-01
Journal of Environmental Engineering
Abstract:The use of permeable reactive barriers (PRBs) for groundwater remediation is based on two distinct mechanisms: sorption and transformation. With sorption as the main mechanism, contaminants sorb on the PRB materials and are retarded. With transformation as the main mechanism, the contaminants react with the PRB materials and then converted to less toxic or innocuous substances. In this study, we tested surfactant-modified zeolite/zero valent iron (SMZ/ZVI) pellets as a PRB material to retard and degrade perchloroethylene (PCE), utilizing both sorption and transformation processes. Batch PCE kinetic studies showed instantaneous PCE removal from the aqueous phase due to sorption and subsequent removal with time due to reduction. The separation of sorption from reduction can be used to obtain both the PCE distribution coefficient (K-d) and the pseudofirst-order reduction rate constant (mu(obs)) from a single batch experiment. The calculated Kd and fobs values are 3.0 and 0.5 L/kg and 0.14 and 0.05 h(-1) for SMZ/ZVI and Z/ZVI pellets, respectively. Column experiments were performed at linear flow velocities of 0.07, 0.14, and 0.20 cm/min. The results were modeled using the one-dimensional advection-dispersion equation with linear sorption and first-order transformation. The K-d values were 2.3 +/- 0.4 and 0.5 +/- 0.1 L/kg for SMZ/ZVI and Z/ZVI pellets, respectively, in agreement with those of the batch study. The PCE transformation constants varied between 0.077 and 0.199 h(-1) for the SMZ/ZVI pellets and between 0.037 and 0.144 h(-1) for the Z/ZVI pellets, indicating that an enhanced transformation of PCE occurred with the sorbing SMZ/ZVI pellets. The PCE reduction rates were faster at slower flow rates, indicating that the reduction was not a mass-transfer-limited process.
What problem does this paper attempt to address?